IT職員としてのあなたは昇進したいのですか。プロなIT技術専門家になりたいのですか。速くMicrosoftの070-291認定試験を申し込みましょう。この認証がどんなに重要するかあなたもよく知っています。試験に合格できないなんて心配しないで、あなたの能力を疑わないでください。Microsoftの070-291認定試験を受けたいのなら、試験の準備に関する全ての質問がIT-Passports.comは解決して差し上げます。IT-Passports.comはIT認証に対するプロなサイトです。IT-Passports.comがそばのいてあげたら、全ての難問が解決できます。IT-Passports.comに助けられた受験生は数え切れないです。IT-Passports.comをクロックしたら、１００パーセントの成功を差し上げます。
Microsoftの70-511認証試験を選んだ人々が一層多くなります。70-511試験がユニバーサルになりましたから、あなたはIT-Passports.com のMicrosoftの70-511試験問題と解答￥を利用したらきっと試験に合格するができます。それに、あなたに極大な便利と快適をもたらせます。実践の検査に何度も合格したこのサイトは試験問題と解答を提供しています。皆様が知っているように、IT-Passports.comはMicrosoftの70-511試験問題と解答を提供している専門的なサイトです。
Microsoft 70-511認証はIT業界にとても重要な地位があることがみんなが、たやすくその証本をとることはではありません。いまの市場にとてもよい問題集が探すことは難しいです。でも、IT-Passports.comにいつでも最新な問題を探すことができ、完璧な解説を楽に勉強することができます。
試験科目：Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure
問題と解答：全260問
試験科目：TS: Windows Applications Development with Microsoft .NET Framework 4
問題と解答：全156問
あなたはまだ何を待っているのですか。機会が一回だけありますよ。いまMicrosoftの70-511試験問題のフルバージョンを取ることができます。IT-Passports.comというサイトをクッリクしたらあなたの願いを果たせます。あなたが最も良いMicrosoftの70-511試験トレーニング資料を見つけましたから、IT-Passports.comの問題と解答を安心に利用してください。きっと試験に合格しますよ。
この情報の時代の中に、たくさんのIT機構はMicrosoftの70-511認定試験に関する教育資料がありますけれども、受験生がこれらのサイトを通じて詳細な資料を調べられなくて、対応性がなくて受験生の注意 に惹かれなりません。
現在の社会の中で優秀なIT人材が揃て、競争も自ずからとても大きくなって、だから多くの方はITに関する試験に参加してIT業界での地位のために奮闘しています。070-291はMicrosoftの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/070-291.html
NO.1 You are the administrator of a Windows Server 2003 computer named Server1. Server1 is a domain
member server that has the DNS service installed.
Server1 is configured with two network interfaces named NIC1 and NIC2. Routing is not enabled between
the two network interfaces.NIC1 and NIC2 are configured as shown in the following table.
Resources on the preproduction network segment use the same fully qualified domain names (FQDNs)
as resources in the production network.The TCP/IP properties on client computers in the preproduction
environment are controlled by individual testers.
You need to ensure that the users in the preproduction environment cannot resolve FQDNs from the
production network.You want to accomplish this goal by using the DNS console on Server1.
What should you do?
A.Configure the interfaces properties on Server1 to listen on 192.168.2.10 only.
B.Configure the forwarders on Server1 to refer requests to 192.168.3.2.
C.Configure Server1 to disable recursion.
D.Configure Server1 to disable round robin.
Answer: A
Microsoft認定資格 070-291一発合格 070-291クラムメディア 070-291問題集 070-291体験
NO.2 You are the network administrator for your company.The network consists of a single Active Directory
domain.
The domain contains an organizational unit (OU) named Webservers.The Webservers OU contains the
computer accounts of 12 Windows Server 2003 computers that function as intranet Web servers.A Group
Policy object (GPO) named WebserversPolicy is linked to the Webservers OU.The GPO is used to
configure various settings on
the computers in the OU.A global group named WebserverAdmins is a member of the Administrators local
group on each intranet Web server.
You plan to install a security scanning application on each intranet Web server.The documentation for the
application states that it uses a service account, which must be able to modify the
HKEY_LOCAL_MACHINE\SYSTEM key in the registry of every computer on which the application is
installed.
You create the service account in the domain.The company's written security policy states that service
accounts must be assigned only the minimum rights and permissions that they require to function.
You need to configure the intranet Web servers so that they comply with the installation requirements of
the security scanning application.You also need to comply with the company's security policy.You want to
achieve this goal by using the minimum amount of administrative effort.
What should you do?
A.Add the service account to the WebserverAdmins global group.
B.Configure the required permissions as registry security settings in the WebserversPolicy GPO.
C.Run the regedit.exe command to add the required permissions to the registry of each intranet Web
server.
D.Run the explorer.exe command to modify NTFS permissions on the
Systemroot\System32\Config\System
file.Assign the service account the Allow - Change permission.
E.Configure file system security settings in the WebserversPolicy GPO to modify NTFS permissions on
the
Systemroot\System32\Config\System file.Assign the service account the Allow - Change permission.
Answer: D
Microsoft勉強法 070-291番号 070-291認証試験
NO.3 Active Screen
You are the network administrator for your company.The network consists of a single Active Directory
domain.The relevant portion of the network is shown in the exhibit.(Click the Exhibit button.)
You need to configure a server named Server1 to use a valid static IP configuration.You need to enable
Server1 to
communicate with all hosts on the network and on the Internet.You want Server1 to query the DNS server
on the local subnet for name resolution.You also want to configure redundancy for name resolution.
What should you do?
To answer, configure the correct options in the dialog box.Drag the appropriate IP address or addresses
and the appropriate subnet mask or masks to the appropriate location or locations in the dialog box.
Answer:
NO.4 You are the network administrator for your company.The network consists of a single Active Directory
domain.The domain contains 35 Windows Server 2003 computers; 3,000 Windows XP Professional
computers; and 2,000 Windows 2000 Professional computers.
Windows Server Update Services (WSUS) is installed on a server named Server1. The necessary Group
Policy object (GPO) is configured.
You need to confirm whether all computers in the domain have received all approved updates from
Server1.
What should you do on Server1?
A.Install and configure Urlscan.exe.
B.At the command prompt, type gpresult /scope COMPUTER.
C.Open the WSUS console.Run the Status of Computers report.
D.Open the WSUS console.Run the Synchronization Results report.
Answer: C
Microsoft虎の巻 070-291過去問 070-291認定
NO.5 You are a network administrator for Alpine Ski House.The network consists of a single Active Directory
domain named alpineskihouse.com.
Your company acquires a company named Adventure Works.The Adventure Works network consists of a
single
Active Directory domain named adventure-works.com.
A server named Server32 is a network-management application server in the adventure-works.com
domain.Server32 accesses all of the desktop client computers to perform automated software upgrades
and hardware inventory.The network-management software on Server32 references desktop computers
by unqualified
host names, which are resolved to clientname.adventure-works.com by using a DNS server.
You join Server32 to your domain to become server32.alpineskihouse.com.The Server32 IP address is
10.10.10.90.
You are gradually migrating all adventure-works.com desktop client computers to your domain to become
clientname.alpineskihouse.com.You do not have access to the adventure-works.com DNS server.When
Server32 attempts to apply an update to the client computers, the network-management software returns
many alerts that say that desktop computers cannot be found.
You want to allow the network-management software on Server32 to resolve unqualified client computer
host
ames in adventure-works.com or alpineskihouse.com, and you want to use the minimum amount of
administrative effort.
What should you do?
A.On the DNS server for alpineskihouse.com, add a zone for adventure-works.com.Create a host (A)
record for server32.adventure-works.com that points to 10.10.10.90.
B.On Server32, in System Properties, type adventure-works.com in the Primary DNS suffix of this
computer field in the DNS Suffix and Netbios Computer Name setting.
C.On Server32, configure a Hosts file that contains the name and IP address of every network computer.
D.On Server32, in Advanced TCP/IP Settings, add adventure-works.com and alpineskihouse.com to the
Append these DNS suffixes (in order) setting.
Answer: D
Microsoft学校 070-291スクール 070-291通信 070-291テスト
NO.6 131.107.12.0/24
Answer
:
2.You are the network administrator for your company.All servers run Windows Server 2003. All servers
are configured with static IP addresses.All client computers run Windows XP Professional.All client
computers are configured as DHCP clients.
The company has a main office and one branch office.The offices are separated by a router.A DHCP
server is deployed in each office.
One of the DHCP servers shuts down unexpectedly.It takes four hours to repair the server.During that
time, several mobile users connect their portable computers to the network and report that they cannot
connect to shared resources on the network.
After the server is repaired, you create a new scope on each DHCP server that includes IP addresses for
the other office.You activate the scopes.
You test the new DHCP configuration by shutting down the DHCP server in the main office.You find out
that the client computers in the main office are not receiving IP addresses from the DHCP server in the
branch office. You need to ensure that when the DHCP server in one office fails, the client computers will
receive a correct IP
address configuration from the DHCP server in the other office.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Configure the router between the offices to forward BOOTP broadcasts.
B.Configure the DHCP server in each office with a DHCP scope that includes the same IP addresses as
the DHCP server in the other office.Activate the scope.
C.Configure the DHCP server in each office with an additional network adapter.Connect each new
network adapter to the local network.Assign an IP address from the other office's network to each new
network adapter.
D.Install and configure a DHCP relay agent in each office.
Answer: DA
Microsoftスクール 070-291合格率 070-291取得
3.You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The network contains a Web server named Server1 that runs IIS 6.0 and hosts a secure Web site.The
Web site is accessible from the intranet, as well as from the Internet.All users must authenticate when
they connect to Server1.
All users on the Internet must use a secure protocol to connect to the Web site.Users on the intranet do
not need to use a secure protocol.
You need verify that all users are using a secure protocol to connect to Server1 from the Internet.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Monitor the events in the application log on Server1.
B.Monitor the events in the security log on Server1.
C.Monitor the Web server connections on Server1 by using a performance log.
D.Monitor network traffic to Server1 by using Network Monitor.
E.Monitor the IIS logs on Server1.
Answer: ED
Microsoft認証試験 070-291過去問 070-291対策 070-291フリーク
4.You are the administrator of an Active Directory domain.All servers run Windows Server 2003. All client
computers run Windows XP Professional.All computers are members of the domain.
The Secure Server (Require Security) IPSec policy is assigned to a file server named Server6. The policy
is configured as shown in the exhibit.(Click the Exhibit button.)
Users report that they cannot access shared folders on Server6. Users were able to access shared
folders on
Server6 prior to the implementation of the IPSec policy.
You need to ensure that all client computers in the domain can access the shared folders on Server6. You
must ensure that all communications between client computers and Server6 be encrypted.
What should you do?
A.On Server6, enable the All ICMP Traffic IP Security rule in the properties of the Secure Server (Require
Security) IPSec policy.
B.On Server6, enable the <Dynamic> IP Security rule in the properties of the Secure Server (Require
Security)
IPSec policy.
C.On all client computers, assign the Client (Respond Only) IPSec policy.
D.On all client computers, install an IPSec communication certificate in the local machine store.
Answer: C
Microsoft問題 070-291書籍 070-291過去 070-291取得
5.You are a network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The company has a main office and one branch office.The perimeter networks for each office are
configured as shown in the exhibit.(Click the Exhibit button.)
You configure an L2TP/IPSec VPN tunnel between Server1 and Server2. You also configure and assign
an IPSec
policy named RASIPSec that requires secure communications.
You need to ensure that no unsecured traffic from the Internet reaches the internal network through this
VPN.You
also need to ensure that access to the VPN servers from their respective internal networks is not
disrupted. What should you do?
A.Configure input and output L2TP/IPSec packet filters on the internal interfaces of Server1 and Server2.
B.Configure input and output L2TP/IPSec packet filters on the external interfaces of Server1 and Server2.
C.In the properties of RASIPSec, edit the All IP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
D.In the properties of RASIPSec, edit the All ICMP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
Answer: B
Microsoft特典 070-291独学 070-291テスト 070-291模擬
6.You are the administrator of an Active Directory domain.The network contains a Windows Server 2003
domain controller named Server1.
Users report that they experience intermittent delays when they log on to Server1. Administrators report
that replication attempts between Server1 and other domain controllers are occasionally delayed.
You need to verify the cause of the intermittent connection delays to Server1. You also need to find out
whether the problem is related to a hardware deficiency on Server1. You need to track these delays over
a period of one day.
What should you do first?
A.Run the netdiag /verbose command to perform a network diagnostic test on Server1.
B.Run the replmon command to view the Active Directory replication status on Server1.
C.Use Network Monitor to view the network traffic packet contents between Server1 and all other
computers.
D.Create a System Monitor counter to track the queue lengths on the network adapter on Server1.
Answer: D
Microsoft通信 070-291 PDF 070-291方法 070-291参考書
NO.7 You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003. All client computers run Windows XP Professional.
You install Windows Server Update Services (WSUS) on a network server named Server1. When you
attempt to synchronize Server1 with the Windows Update servers, you receive an error message.You
open Internet Explorer and verify that you can communicate with an external Web site by using the proxy
server.
You need to ensure that Server1 can communicate with the Windows Update servers.
What should you do on Server1?
A.Restart the IIS administration tool.
B.Configure the Internet Explorer settings to bypass the proxy server.
C.In the WSUS options, configure authentication to the proxy server.
D.Install the ISA Firewall Client.
Answer: C
Microsoft 070-291認定資格 070-291費用 070-291書籍
NO.8 Drag drop
You are the network administrator for a Web hosting company.All servers run Windows Server 2003. All
client computers run Windows XP Professional.
Your company is assigned the following IP address ranges by the ISP:
>131.107.10.0 through 131.107.10.255
>131.107.11.0 through 131.107.11.255
The company's data center contains 400 Windows Server 2003 computers and consists of two subnets
named subnet A and subnet B.Subnet A contains 200 servers and uses the 131.107.10.0 network
address.Subnet B also contains 200 servers and uses the 131.107.11.0 network address.All server IP
addresses are assigned by DHCP.All computers in the data center have valid Internet-accessible IP
addresses.
As a result of a corporate acquisition, 200 additional servers will be added to your company's data center
within one month.The new servers will be placed on the network segment that maps to subnet A.The
existing router does not have the capacity for an additional subnet, and the budget does not allow the
purchase of a new router.You will
need to add the additional servers to the existing subnet A.The ISP assigns you the additional IP address
range 131.107.12.0 through 131.107.12.255.
You need to change the IP addressing scheme to accommodate all required servers in subnet A and
subnet B.You are authorized to make any necessary changes.
The diagram in the work area shows the network configuration and the planned number of servers for
each subnet.
Which IP address should be assigned to each subnet?
To answer, drag the appropriate IP address or addresses to the correct locations in the work area.
IP address IP Addresses
1> 131.107.10.0/23
没有评论:
发表评论