2014年3月10日星期一

Alcatel-Lucent 4A0-M01認定試験の準備を十分に完了したのか

現在、市場でオンラインのAlcatel-Lucentの4A0-M01試験トレーニング資料はたくさんありますが、IT-Passports.comのAlcatel-Lucentの4A0-M01試験トレーニング資料は絶対に最も良い資料です。我々IT-Passports.comはいつでも一番正確なAlcatel-Lucentの4A0-M01資料を提供するように定期的に更新しています。それに、IT-Passports.comのAlcatel-Lucentの4A0-M01試験トレーニング資料が一年間の無料更新サービスを提供しますから、あなたはいつも最新の資料を持つことができます。

IT-Passports.comに提供されている資料はIT認定試験に対して10年過ぎの経験を持っているプロフェッショナルによって研究と実践を通じて作成し出されたものです。IT-Passports.comは最新かつ最も正確な試験4A0-M01問題集を用意しておきます。IT-Passports.comは皆さんの成功のために存在しているものですから、IT-Passports.comを選択することは成功を選択するのと同じです。順調にIT認定試験に合格したいなら、IT-Passports.comはあなたの唯一の選択です。

他の人の成功を見上げるよりも、自分の成功への努力をしたほうがよいです。IT-Passports.comのAlcatel-Lucentの4A0-M01試験トレーニング資料はあなたの成功への第一歩です。この資料を持っていたら、難しいAlcatel-Lucentの4A0-M01認定試験に合格することができるようになります。あなたは新しい旅を始めることができ、人生の輝かしい実績を実現することができます。

あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっとそれを望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。では、IT業種で仕事しているあなたはどうやって自分のレベルを高めるべきですか。実は、4A0-M01認定試験を受験して認証資格を取るのは一つの良い方法です。Alcatel-Lucentの認定試験の4A0-M01資格は非常に大切なものですから、Alcatel-Lucentの試験を受ける人もますます多くなっています。

試験番号:4A0-M01問題集
試験科目:Alcatel-Lucent 「Alcatel-Lucent IP/MPLS Mobile Backhaul Transport」
問題と解答:全150問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/4A0-M01.html

NO.1 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B

Alcatel-Lucent   4A0-M01認定証   4A0-M01認証試験   4A0-M01   4A0-M01参考書

NO.2 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A

Alcatel-Lucent過去問   4A0-M01   4A0-M01   4A0-M01

NO.3 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A

Alcatel-Lucent練習問題   4A0-M01   4A0-M01   4A0-M01   4A0-M01認定資格

NO.4 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B

Alcatel-Lucent   4A0-M01認定証   4A0-M01認証試験   4A0-M01認定資格   4A0-M01認証試験   4A0-M01過去問

NO.5 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B

Alcatel-Lucent過去問   4A0-M01   4A0-M01   4A0-M01認定資格   4A0-M01認定証   4A0-M01

NO.6 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B

Alcatel-Lucent   4A0-M01過去問   4A0-M01参考書   4A0-M01   4A0-M01

NO.7 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C

Alcatel-Lucent   4A0-M01   4A0-M01過去問   4A0-M01

NO.8 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01

NO.9 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A

Alcatel-Lucent認定資格   4A0-M01認定試験   4A0-M01   4A0-M01認定資格   4A0-M01

NO.10 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01認定試験

NO.11 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01

NO.12 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B

Alcatel-Lucent練習問題   4A0-M01認定試験   4A0-M01認定試験   4A0-M01認定資格

NO.13 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B

Alcatel-Lucent練習問題   4A0-M01   4A0-M01   4A0-M01   4A0-M01

NO.14 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01認証試験

NO.15 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01

NO.16 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D

Alcatel-Lucent参考書   4A0-M01参考書   4A0-M01認証試験   4A0-M01参考書   4A0-M01問題集

NO.17 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C

Alcatel-Lucent認定証   4A0-M01認定試験   4A0-M01認定証

NO.18 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A

Alcatel-Lucent   4A0-M01参考書   4A0-M01   4A0-M01   4A0-M01認定資格

NO.19 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B

Alcatel-Lucent   4A0-M01過去問   4A0-M01認定試験   4A0-M01問題集

NO.20 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B

Alcatel-Lucent過去問   4A0-M01練習問題   4A0-M01

もし4A0-M01認定試験を受験したいなら、4A0-M01試験参考書が必要でしょう。ターゲットがなくてあちこち参考資料を探すのをやめてください。どんな資料を利用すべきなのかがわからないとしたら、IT-Passports.comの4A0-M01問題集を利用してみましょう。この問題集は的中率が高くて、あなたの一発成功を保証できますから。ほかの試験参考書より、この問題集はもっと正確に実際問題の範囲を絞ることができます。こうすれば、この問題集を利用して、あなたは勉強の効率を向上させ、十分に4A0-M01試験に準備することができます。

没有评论:

发表评论