成功した方法を見つけるだけで、失敗の言い訳をしないでください。TibcoのTB0-116 TB0-113 TB0-111 TB0-110試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。IT-Passports.comのTibcoのTB0-116 TB0-113 TB0-111 TB0-110試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。
TibcoのTB0-116 TB0-113 TB0-111 TB0-110認定試験に受かる勉強サイトを探しているのなら、IT-Passports.comはあなたにとって一番良い選択です。IT-Passports.comがあなたに差し上げられるのはIT業種の最先端のスキルを習得したこととTibcoのTB0-116 TB0-113 TB0-111 TB0-110認定試験に合格したことです。この試験は本当に難しいことがみんなは良く知っていますが、試験に受かるのは不可能ではないです。自分に向いている勉強ツールを選べますから。IT-Passports.com のTibcoのTB0-116 TB0-113 TB0-111 TB0-110試験問題集と解答はあなたにとって一番良い選択です。IT-Passports.comのトレーニング資料は完全だけでなく、カバー率も高くて、高度なシミュレーションを持っているのです。これはさまざまな試験の実践の検査に合格したもので、TibcoのTB0-116 TB0-113 TB0-111 TB0-110認定試験に合格したかったら、IT-Passports.comを選ぶのは絶対正しいことです。
試験番号：TB0-116問題集
試験科目：Tibco 「TIBCO Enterprise Message Service 6 Exam」
問題と解答：全134問
試験番号：TB0-113問題集
試験科目：Tibco 「TIBCO Business Studio 3.2 Exam 」
問題と解答：全125問
試験番号：TB0-111問題集
試験科目：Tibco 「TIBCO Rendezvous 8 Exam」
問題と解答：全120問
試験番号：TB0-110問題集
試験科目：Tibco 「TIBCO Collaborative Information Manager 7 Exam」
問題と解答：全120問
IT-Passports.comのTibcoのTB0-116 TB0-113 TB0-111 TB0-110試験トレーニング資料は必要とするすべての人に成功をもたらすことができます。TibcoのTB0-116 TB0-113 TB0-111 TB0-110試験は挑戦がある認定試験です。現在、書籍の以外にインターネットは知識の宝庫として見られています。IT-Passports.com で、あなたにあなたの宝庫を見つけられます。IT-Passports.com はTibcoのTB0-116 TB0-113 TB0-111 TB0-110試験に関連する知識が全部含まれていますから、あなたにとって難しい問題を全て解決して差し上げます。
弊社が提供した部分の資料を試用してから、決断を下ろしてください。もし弊社を選ばれば、１００％の合格率を保証でございます。
IT-Passports.comは最高な品質で最速なスピードでTibcoのTB0-116 TB0-113 TB0-111 TB0-110認定試験の資料を更新するサイトでございます。もしかすると君はほかのサイトもTibcoのTB0-116 TB0-113 TB0-111 TB0-110認証試験に関する資料があるのを見つけた、比較したらIT-Passports.comが提供したのがいちばん全面的で品質が最高なことがわかりました。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/TB0-111.html
NO.1 For Rendezvous secure daemon (RVSD), subject access can be restricted to specific users. Where on
the RVSD browser interface is this feature configured?
A. on the User's page
B. on the Subject Access page
C. on the Limiting Access page
D. on the Authorize Subjects page
Answer: C
Tibco認定証 TB0-111練習問題 TB0-111過去問
NO.2 Queue dispatch calls remove the event at the head of a queue, and run its callback function. What is
the correct behavior for the three types of dispatch calls in situations where the queue is empty? (Choose
three.)
A. Ordinary dispatch blocks indefinitely, until the queue contains an event.
B. Polling dispatch does not block. If the queue is empty, it returns immediately.
C. Timed dispatch does not block for an event, but keeps on polling periodically.
D. Ordinary dispatch blocks for the timeout value, until the queue contains an event.
E. Polling dispatch blocks waiting for an event. If the queue is empty, it returns immediately.
F. Timed dispatch blocks waiting for an event, but returns without dispatching anything if a waiting time
limit is exceeded.
Answer: A,B,F
Tibco TB0-111認証試験 TB0-111練習問題
NO.3 In TIBCO Rendezvous, a control channel is used for communication between _____.
A. Rendezvous daemons and client processes
B. Rendezvous daemons and browser interface
C. Rendezvous managed daemons and Rendezvous non-managed daemons
D. Rendezvous Daemon Manager (RVDM) and Rendezvous managed daemons
Answer: D
Tibco練習問題 TB0-111 TB0-111 TB0-111 TB0-111認証試験
NO.4 Your back-end processing supports multi-threading and you plan to leverage this capability in the
context of a Rendezvous distributed queue (RVCMQ) subscriber by running five concurrent threads.
Which statement is correct?
A. RVCMQ scales by multiple program instances (horizontally), not by multi-threading (vertically).
B. Each distributed queue member receives as many messages as specified by the scheduler
configuration (the scheduler tasks parameter must be set to 5 or greater).
C. Each distributed queue member receives as many messages as specified by the worker tasks
parameter (the worker tasks parameter of each queue member must be equal to or greater than 5).
D. Each distributed queue member receives as many messages as it dispatches (nothing needs to be
done from a RVCMQ standpoint as it is a matter of the multi-threaded message dispatching).
Answer: C
Tibco TB0-111 TB0-111 TB0-111認定試験
NO.5 tibrvlistenis started with the following settings: -network ";224.2.2.2;224.6.6.6" "mytest" tibrvsend is
started with the following settings: -network ";224.6.6.6;224.2.2.2" "mytest". "message #1" What is the
expected result?
A. The listener receives "message #1" only when run on a different host than the sender.
B. The listener does not receive "message #1" when run on a different host than the sender.
C. The listener will receive the message only if both the listener and sender run on the same host.
D. The listener will receive the message only if both the listener and sender connect remotely to the same
daemon.
Answer: A
Tibco過去問 TB0-111過去問 TB0-111過去問 TB0-111練習問題 TB0-111 TB0-111問題集
NO.6 Which statement is correct about Rendezvous fault-tolerant groups (RVFTs)?
A. RVFT is an election protocol that tells an application when it is active or inactive.
B. RVFT can only be utilized for message producers, not for message consumers.
C. For reliable consumers bound to an RVFT transport, the RVFT transport automatically disables
subscriptions if the fault-tolerant group member becomes inactive.
D. For certified consumers bound to an RVFT transport, the RVFT transport automatically
confirms messages if the fault-tolerant group member becomes inactive.
E. For certified consumers bound to an RVFT transport, the RVFT transport automatically cancels the
certified agreement if the fault-tolerant group member becomes inactive.
Answer: A
Tibco問題集 TB0-111練習問題 TB0-111過去問 TB0-111
NO.7 A publisher application uses a transport with UDP port number 8600 and multicast group 239.1.1.1.
Which two sets of transport parameters enable a subscriber application to receive messages from the
publisher? (Choose two.)
A. Service 6800, Network ";239.1.1.0;239.1.1.1"
B. Service 8600, Network ";239.1.1.0;239.1.1.1"
C. Service 8600, Network ";239.1.1.1,239.1.1.0"
D. Service 8600, Network ";239.1.1.0,239.1.1.1;239.1.1.1"
Answer: C,D
Tibco TB0-111参考書 TB0-111認定試験 TB0-111
NO.8 Which two situations can trigger the presentation of a SCHEDULER.OVERFLOW advisory? (Choose
two.)
A. Scheduler has set a task backlog limit.
B. Scheduler has not set a task backlog limit.
C. Scheduler is accepting new tasks, but discarding old ones on a FIFO basis.
D. The Scheduler backlog limit has been reached and new tasks are being discarded.
Answer: A,D
Tibco認定資格 TB0-111練習問題 TB0-111過去問 TB0-111
NO.9 Which statement is correct about the _RV.INFO.RVCM.DELIVERY.CONFIRM.subject advisory?
A. A listener sends this advisory to confirm receipt of a certified message.
B. The sender presents this advisory after deleting the message from its ledger.
C. A sender presents this advisory whenever a registered listener confirms receipt of a certified message.
D. A sender presents this advisory when all registered listeners have either confirmed delivery of a
certified message, or canceled interest in receiving it.
Answer: B
Tibco問題集 TB0-111 TB0-111認定試験 TB0-111認証試験
NO.10 Which two statements are correct about fault-tolerant groups? (Choose two.)
A. Members of a fault-tolerant group are ranked by means of the specified member weight.
B. Fault-tolerant groups implement a K of N active strategy (K member of a group is active while N-K
members are passive).
C. Members of a fault-tolerant group are ranked by means of the specified member weight, which must be
a unique value within the fault-tolerant group.
D. Members of a fault-tolerant group are ranked by means of the specified member weight. Members with
equal weight are ranked by the time they joined the fault-tolerant group.
E. The members of a fault-tolerant group are ranked by means of the specified member weight. Members
with equal weight are ranked by non-deterministic means opaque to programs.
Answer: B,E
Tibco認定資格 TB0-111 TB0-111
NO.11 You plan to test a network to ensure that it meets the following requirements: 100,000 point-topoint
messages to be published by a single source in batch mode with ten messages per batch with an interval
gap of 10 milliseconds. What is the correct rvperfm command to start a test run?
A. rvperfm -service 7501 -daemon 7500 -inbox -messages 100000 -interval 10 -batch 10
B. rvperfm -service 7500 -daemon 7500 -inbox -messages 100000 -interval 0.01 -batch 10
C. rvperfm -service 7500 -daemon 7500 -subject PTP -messages 100000 -interval 10 -batch 10
D. rvperfm -service 7501 -daemon 7500 -subject _INBOX -messages 100000 -interval 10 -batch
E. rvperfm -service 7501 -daemon 7500 -subject _PTP -messages 100000 -interval 0.01 -batch 10
Answer: B
Tibco TB0-111認定証 TB0-111認定証 TB0-111
NO.12 The following is the declaration of secure daemon in Rendezvous C API: tibrv_status
tibrvSecureDaemon_SetUserCertWithKey( const char* userCertWithKey, const char* password);
Which two statements are correct about this function? (Choose two.)
A. The password parameter is used to decrypt the private key.
B. The password parameter is used for the password for this user.
C. TheuserCertWithKey parameter is used to register user certificate with a private key. The text of this
certificate must be in PEM encoding.
D. TheuserCertWithKey parameter is used to register user certificate with a private key. The text of this
certificate may be in PEM or PK12 encoding.
Answer: A,C
Tibco過去問 TB0-111 TB0-111問題集 TB0-111問題集
NO.13 When programming a TIBCO Rendezvous fault-tolerant application, it is a documented best practice to
associate fault-tolerant member events with _____.
A. a low-priority queue
B. a high-priority queue
C. a system event queue
D. the default event queue
Answer: B
Tibco認定試験 TB0-111 TB0-111問題集 TB0-111過去問
NO.14 With TIBCO Rendezvous messaging, which networking protocol does the client application use to
connect to the Rendezvous daemon (RVD)?
A. SSL
B. TCP
C. UDP
D. HTTP
Answer: D
Tibco認定証 TB0-111認定資格 TB0-111認定資格
NO.15 Which advisory message does a Rendezvous fault-tolerant member present when other group
members use parameters that do not match its corresponding parameters?
A. _RV.ERROR.RVFT.PARAM_MISMATCH.group
B. _RV.ERROR.RVFT.PARAM_COLLISION.group
C. _RV.ERROR.RVFT.MEMBER_UNAVAILABLE.group
D. _RV.ERROR.RVFT.MEMBER_PARAM_MISMATCH.group
Answer: A
Tibco過去問 TB0-111練習問題 TB0-111
NO.16 Click the Exhibit button.
Which menu option shown in the exhibit is used for setting the default service and network for
Rendezvous secure daemons (RVSDs)?
A. Users
B. Services
C. XML Configuration
D. Daemon Parameters
E. Networks and Services
Answer: D
Tibco過去問 TB0-111 TB0-111 TB0-111
NO.17 Where is the Rendezvous license ticket file located?
A. It can be in any directory in theclasspath.
B. It can be in any directory in the execution path.
C. It must be in the Rendezvous Home/lib directory.
D. It must be in the Rendezvous Home/bin directory.
Answer: A
Tibco参考書 TB0-111認定資格 TB0-111認定資格 TB0-111認証試験 TB0-111認定証
NO.18 Which three activities can be configured through the Rendezvous routing daemon (RVRD) HTTP
interface to be routinely output to the RVRD log file? (Choose three.)
A. Subject Data: to log all messages that this routing daemon forwards to its neighbors or receives from
its neighbors
B. Connections: to log connection activity whenever this routing daemon establishes or closes a
connection to a neighbor
C. Client: to log RVRD local client connection activity whenever a client application establishes or closes a
connection to the routing daemon
D. Subject interest: to log all subscription requests (notification of listening) that this routing daemon
sends to its neighbors or receives from its neighbors
E. Remote: to log RVRD remote client connection activity whenever a remote client application
establishes or closes a connection to the routing daemon
Answer: A,B,D
Tibco参考書 TB0-111 TB0-111参考書 TB0-111認定資格 TB0-111
NO.19 Which two statement are correct about certified delivery confirmation? (Choose two.)
A. Explicit confirmation of message delivery by the listening program is the default behavior.
B. When confirmation reaches the certified sender, the transport presents a DELIVERY.CONFIRM
advisory.
C. Automatic confirmation of message delivery upon return from the callback function is the default
behavior.
D. When confirmation reaches the certified listener, the transport presents a
DELIVERY.CONFIRM advisory.
E. When confirmation reaches the certified sender, the transport presents a
DELIVERY.COMPLETE advisory.
Answer: B,C
Tibco問題集 TB0-111問題集 TB0-111参考書 TB0-111認証試験
NO.20 Company A will deploy their Rendezvous applications to their production environment. They need to
run five RVDs, two RVRDs, one RVA, and one RVTRACE utility on one particular host. How many ticket
files (tibrv.tkt) are needed on the host?
A. one
B. seven
C. eight
D. nine
E. four
Answer: A
Tibco練習問題 TB0-111 TB0-111参考書
没有评论:
发表评论