最高のHPのHP2-Z12認定試験問題集

HP2-Z12認定試験に関連する参考資料を提供できるサイトが多くあります。しかし、資料の品質が保証されることができません。それと同時に、あなたに試験に失敗すれば全額返金という保障を与えることもできません。普通の参考資料と比べて、IT-Passports.comのHP2-Z12問題集は最も利用に値するツールです。IT-Passports.comの指導を元にして、あなたは試験の準備を十分にすることができます。しかも、楽に試験に合格することができます。IT領域でより大きな進歩を望むなら、HP2-Z12認定試験を受験する必要があります。IT試験に順調に合格することを望むなら、IT-Passports.comのHP2-Z12問題集を使用する必要があります。

IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにHPのHP2-Z12認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。IT-Passports.comのHPのHP2-Z12試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。

あなたに最大の利便性を与えるために、IT-Passports.comは様々なバージョンの教材を用意しておきます。PDF版のHP2-Z12問題集は読みやすくて、忠実に試験の問題を再現することができます。テストエンジンとして、ソフトウェア版のHP2-Z12問題集はあなたの試験の準備についての進捗状況をテストするために利用することができます。もし試験の準備を十分にしたかどうかを確認したいなら、ソフトウェア版のHP2-Z12問題集を利用して自分のレベルをテストしてください。従って、すぐに自分の弱点や欠点を識別することができ、正しく次のHP2-Z12学習内容を手配することもできます。

IT-Passports.comのHP2-Z12問題集はあなたの一発合格を保証できる資料です。問題集の的中率はとても高いですから、この問題集だけで試験に合格することができます。信じられなら利用してみてください。不合格になればIT-Passports.comは全額返金のことができますから、絶対損にならないです。利用したらHP2-Z12問題集の品質がわかるようになるので、まず問題集の無料なサンプルを試しましょう。問題集のdemoが無料で提供されますから、IT-Passports.comのサイトをクリックしてダウンロードしてください。

試験番号：HP2-Z12問題集
試験科目：HP 「Servicing HP Networking Products」
問題と解答：全94問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/HP2-Z12.html

NO.1 You are servicing an HP A Series switch, which is currently using a file call myconfig.cfg for the
startup-config. You want to preserve your new configuration changes in the switch's startup config.
Which command should you use?
A. write memory
B. save
C. save startup.cfg
D. copy running-config startup-config
Answer: D

HP   HP2-Z12   HP2-Z12練習問題

NO.2 You are troubleshooting a connection on an HP A Series switch that has one LED per-port. You want to
know if the port is operating in the wrong duplex mode. How do you use the LED to obtain relevant
information?
A. Click the Mode button until the mode LED is blinkinggreenand thencheck the port LED.
B. Click the Mode button until the mode LED is yellow and thencheck the port LED.
C. Check if the port LED is blinking,which indicates its duplex status (while its color indicates speed).
D. Check the color of the port LED, which indicates its duplex status (while its blinking indicates speed).
Answer: B

HP過去問   HP2-Z12認定試験   HP2-Z12認定証

NO.3 Which device forwards network traffic based only on Layer 2 information?
A. router
B. switch
C. hub
D. firewall
Answer: C

HP認定証   HP2-Z12   HP2-Z12認定資格   HP2-Z12

NO.4 Which E Series switches require two power supplies to be completely operational? (Select two.)
A. HP E4200vl switch
B. HP E5406zl switch
C. HP E5412zl switch
D. HP E2900 al switch
E. HP E8212zl switch
Answer: C,E

HP練習問題   HP2-Z12   HP2-Z12   HP2-Z12

NO.5 Which area of the network is considered the backbone?
A. data center
B. core
C. distribution layer
D. LAN access layer
Answer: B

HP参考書   HP2-Z12   HP2-Z12認定資格   HP2-Z12

NO.6 You have been sent to a customer site to check an HP E8212 zlswitch. When you arrive, you notice
that the Fault and Fan Status LEDs are flashing. What is the most likely cause of this LED behavior?
A. The cooling fan is no longer functional
B. The switch is brand new and needs to have the most current firmware installed.
C. The external power supply has failed, causing the fan to malfunction.
D. The switch has failed its self-test
Answer: C

HP参考書   HP2-Z12認定試験   HP2-Z12   HP2-Z12認定試験   HP2-Z12   HP2-Z12

NO.7 You are installing an HP A Series switch that requires a backup power supply as well as extra power for
Power over Ethernet (PoE) devices. Which device should you connect to this switch?
A. RPS 1200 A
B. RPS 1000 A3
C. RPS 800 A
D. RPS500 A3
Answer: B

HP   HP2-Z12   HP2-Z12   HP2-Z12

NO.8 You are installing an SFP transceiver in an HP A Series switch's SFP port. Which steps should you
perform? (Select two.)
A. Connect the fiber optic cable to the SFP transceiver before installing the transceiver.
B. Slide the transceiver into the SFP port until the spring clips catch.
C. Rotate the clasp, if present on the front of the transceiver, until it catches the knob.
D. Press and hold the spring clips on the SFP port
E. Press and hold the release button below the SFP port.
Answer: B,C

HP   HP2-Z12   HP2-Z12過去問   HP2-Z12   HP2-Z12   HP2-Z12練習問題

NO.9 Which switch is specifically designed for networks that require basic connectivity and have little or no IT
support?
A. fixed-port switch
B. light Layer 3 switch
C. modular switch
D. unmanaged switch
Answer: D

HP   HP2-Z12過去問   HP2-Z12練習問題   HP2-Z12認証試験   HP2-Z12

NO.10 You are troubleshooting an HP A Series switch. You attempt to log in to both the CLI and the Web
browser interface in several different ways, but you are always prompted for credentials. The customer
tells you that the person who created the passwords is no longer employed by the company. What can
you do to access the switch?
A. Use the failsafe credentials, admin for username and password for password.
B. Press the Reset and Clear buttons on the switch's front panel, holding them for at least 5 seconds, to
clear the password
C. Access the Boot ROM menu and bypass the configuration, starting the switch at factory default
settings.
D. Access the switch over a direct console connection, which always permits access without a password.
Answer: C

HP認定資格   HP2-Z12   HP2-Z12   HP2-Z12   HP2-Z12認定資格

NO.11 How can you check the status of the ports that are providing Power over Ethernet (PoE) on an HP
E2610-PWR switch?
A. Use the Mode button to selectPoE and then view the port Link and Mode LEDs
B. Use the Port Locator button to selectPoE and then view the port Status and Link LEDs.
C. View the portPoE LED.
D. Use the switch'sPoE LED and the PoE LED for each port.
Answer: A

HP認定証   HP2-Z12   HP2-Z12

NO.12 You check the startup-config on an HP A Series switch and find that the switch uses myconfig.cfg as
the main startup-config and has no backup config. What happens if you use the undo startup
savedconfiguration command?
A. The myconfig.cfg file is deleted, and the switch returns to factory default settings at the next reboot.
B. The myconfig.cfg file becomes the backup startup-config, and the switch returns to factory default
settings at the next reboot.
C. The myconfig.cfg file becomes the backup startup-config, and is booted at the next reboot unless you
set another main startup-config
D. The myconfig.cfg file is retained in the switch's memory, but the switch returns to factory default
settings at the next reboot
Answer: D

HP認証試験   HP2-Z12   HP2-Z12   HP2-Z12

NO.13 The exhibit shows the Power and seven-segment LEDs of an HP A Series switch. What is the switch's
status?
Exhibit:
A. The switch has member ID 8 in the cluster.
B. The switch has member ID 8 in the cluster, but its attempt to join the cluster has failed.
C. The switch has failed the power on self test (POST) with ID 8.
D. Port number 8 has failed the switch's power on self test (POST).
Answer: C

HP   HP2-Z12練習問題   HP2-Z12   HP2-Z12認定証   HP2-Z12認証試験

NO.14 DRAG DROP
Match the HP A Series switch user interface with the type of access that it controls.
Answer:

NO.15 Several HP A Series switches are distinguished by a dual-personality (or combo) port. What is an
accurate description of this port?
A. It can accept either Ethernet Base-T cable or fiber optic cable
B. It can accept either Ethernet Base-T cable or a small form-factor pluggable (SFP) transceiver
C. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Both can be used simultaneously.
D. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Only one can be used at a time.
Answer: B

HP   HP2-Z12参考書   HP2-Z12   HP2-Z12   HP2-Z12

NO.16 Which HP E Switch Series is specifically designed to be deployed in a data center?
A. E4200vl
B. E6200yl
C. E6600
D. E8200zl
Answer: C

HP   HP2-Z12   HP2-Z12   HP2-Z12認定資格

NO.17 You log in to an HP A Series switch over a console session in order to establish IP connectivity
between the switch and the rest of the network. What is the minimum user privilege level needed to
complete this task?
A. Operator
B. Monitor
C. System
D. Manage
Answer: C

HP認証試験   HP2-Z12認定資格   HP2-Z12認定証   HP2-Z12

NO.18 You are installing a redundant power supply in an HP E8212 zl switch. Which procedures are
recommended when installing the new power supply?(Select two.)
A. Remove the copper RFI shielding.
B. Attach the new power supply to a different AC power source than the existing power supply to provide
true redundancy.
C. Tighten the retaining screws on the new power supply until they are snug but not over-tight.
D. Connect the redundant power supply to the AC power source before installing it in the switch.
E. Remove the grounding tap from the console port before installing the power supply.
Answer: B,C

HP   HP2-Z12練習問題   HP2-Z12

NO.19 A faulty configuration on an HP A Series switch locked a customer out of the management interface.
You bypass the configuration and gain access to the switch's CLI.Your manager asks
you to send her the configuration to examine.
What must you do?
A. Establish IP connectivity between the switch and a BackUp the Startup-Config to a TFTP Server server
and issue the backup command
B. Use the copy command to copy the configuration to your management station.
C. Establish IP connectivity between the switch and your management station and use the save
command to save the configuration.
D. Use the saved-configuration command to select the startup-config and save it out to your management
station.
Answer: A

HP認定証   HP2-Z12   HP2-Z12過去問   HP2-Z12認証試験

NO.20 Which HP A Series switches provide Layer 2 functionality and a Web browser interface but no CLI?
A. HP A5800 Series switches
B. HP NJ2000GIntelliJack switches
C. HP A3600-E1 Series switches
D. HP A3100 Series switches
Answer: B

HP参考書   HP2-Z12問題集   HP2-Z12練習問題   HP2-Z12

HPのHP2-Z12認定試験に受かる勉強サイトを探しているのなら、IT-Passports.comはあなたにとって一番良い選択です。IT-Passports.comがあなたに差し上げられるのはIT業種の最先端のスキルを習得したこととHPのHP2-Z12認定試験に合格したことです。この試験は本当に難しいことがみんなは良く知っていますが、試験に受かるのは不可能ではないです。自分に向いている勉強ツールを選べますから。IT-Passports.com のHPのHP2-Z12試験問題集と解答はあなたにとって一番良い選択です。IT-Passports.comのトレーニング資料は完全だけでなく、カバー率も高くて、高度なシミュレーションを持っているのです。これはさまざまな試験の実践の検査に合格したもので、HPのHP2-Z12認定試験に合格したかったら、IT-Passports.comを選ぶのは絶対正しいことです。