2014年1月18日星期六

EMC E22-275認定試験の出題傾向をつかんだ試験参考書

多くの人々は高い難度のIT認証試験に合格するのは専門の知識が必要だと思います。それは確かにそうですが、その知識を身につけることは難しくないとといわれています。IT業界ではさらに強くなるために強い専門知識が必要です。

EMCのE22-275認定試験に受かる勉強サイトを探しているのなら、IT-Passports.comはあなたにとって一番良い選択です。IT-Passports.comがあなたに差し上げられるのはIT業種の最先端のスキルを習得したこととEMCのE22-275認定試験に合格したことです。この試験は本当に難しいことがみんなは良く知っていますが、試験に受かるのは不可能ではないです。自分に向いている勉強ツールを選べますから。IT-Passports.com のEMCのE22-275試験問題集と解答はあなたにとって一番良い選択です。IT-Passports.comのトレーニング資料は完全だけでなく、カバー率も高くて、高度なシミュレーションを持っているのです。これはさまざまな試験の実践の検査に合格したもので、EMCのE22-275認定試験に合格したかったら、IT-Passports.comを選ぶのは絶対正しいことです。

IT-Passports.comはIT技術を勉強している人がよく知っているウェブサイトです。このサイトはIT認定試験を受けた受験生から広く好評されました。これはあなたに本当のヘルプを与えるサイトです。では、なぜIT-Passports.comは皆さんの信頼を得ることができますか。それはIT-Passports.comにはIT業界のエリートのグループがあって、グループのIT専門家達がずっと皆さんに最高のE22-275資料を提供することに力を尽くしていますから。したがって、IT-Passports.comは優れた参考書を提供して、みなさんのニーズを満たすことができます。

多くの時間と労力をかかってEMCのE22-275認定試験に合格するを冒険にすると代わりIT-Passports.comが提供した問題集を利用してわずか一度お金かかって合格するのは価値があるでしょう。今の社会の中で時間がそんなに重要で最も保障できるIT-Passports.comを選ばましょう。

試験番号:E22-275問題集
試験科目:EMC 「recoverpoint backup and recovery specialist exam 」
問題と解答:全126問

EMCのE22-275試験はIT領域で人気がある重要な試験です。我々はIT領域の人々にショートカットを提供するために、最高のスタディガイドと最高のオンラインサービスを用意して差し上げます。IT-Passports.comの EMCのE22-275試験問題集は全ての試験の内容と答案に含まれています。IT-Passports.comの模擬テストを利用したら、これはあなたがずっと全力を尽くてもらいたいもののことが分かって、しかもそれは正に試験の準備をすることを意識します。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/E22-275.html

NO.1 You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the
correct version of RecoverPoint.
What is the EMC-preferred way to load the correct software version to the RPAs?
A. Before launching Deployment Manager
B. During the Deployment Manager installation process
C. After completing the installation but before the license is installed
D. After the installation is complete
Answer: A

EMC認定試験   E22-275問題集   E22-275   E22-275

NO.2 Refer to the Exhibit.
You are troubleshooting a RecoverPoint issue where consistency groups, using a kdriver splitter, have
stopped working. While analyzing the problem, you ran detect Fibre Channel targets from the SAN
Diagnostics menu. What does this output tell you that relates to the problem in the environment?
A. RPA is not zoned to any hosts
B. All RPA HBA ports are being used as targets
C. Even and odd ports should not see the same targets
D. Ports 0 and 3 should not be connected to the same fabric
Answer: A

EMC認定試験   E22-275問題集   E22-275   E22-275   E22-275

NO.3 You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about
to create the masking view for the RecoverPoint cluster initiator group.
Which setting must be enabled to allow the RPAs to write to the replica volumes when image access is
disabled?
A. Write Protect Bypass
B. Always Push Old
C. Backlog Mirroring
D. Device Tagging
Answer: A

EMC認定証   E22-275認定資格   E22-275練習問題

NO.4 A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to
manage user settings?
A. Security
B. Admin
C. Boxmgmt
D. Monitor
Answer: A

EMC   E22-275   E22-275   E22-275練習問題

NO.5 You have installed the Solaris kdriver on a host. When validating the installation, you find that the
splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the
GUI.
Which step should you take on the host to discover the splitter by the GUI?
A. Run the /etc/init.d/kdrv start command
B. Run the rc.kdrv configure command and restart the kdriver
C. Run the rc.kdrv start command and reboot the host
D. Run the devfsadm command
Answer: A

EMC   E22-275   E22-275   E22-275   E22-275認定試験   E22-275参考書

NO.6 Which generation of RecoverPoint Appliance hardware must be used to ensure you can use a CRR
over FC configuration?
A. Gen2 and 3 only
B. Gen2 and 4 only
C. Gen2, 3, and 4
D. Gen3 and 4 only
Answer: D

EMC   E22-275   E22-275   E22-275認証試験

NO.7 You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks
fine. However, at Site 1 you see the following message on the RecoverPoint Management Application:
WARNING: RPA cannot access discovery AVT: 7001248288220000 ; Site1 ; RPA1 in Site1 ; Cisco -
CVT22-2109000dec3c3182
You have checked that back-end and front-end VSANs are properly configured with the correct members
in each. Which action can you take to perform a full discovery of ITLs and recreation of AVTs to fix this
issue?
A. SSH as 'admin' and run the refresh_santap_view command
B. Refresh the splitters on the RecoverPoint Management Application
C. Rescan the SAN on the RecoverPoint Management Application
D. SSH as 'admin' and run the get_santap_view command
Answer: A

EMC   E22-275問題集   E22-275   E22-275   E22-275   E22-275問題集

NO.8 When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit
and the installation stops.
What must you do to recover the installation?
A. Click Next, correct the SAN issue, and run SAN Diagnostics again
B. Click Next and Accept the SAN issue warning to continue the installation
C. Click Next to resume the installation with flags
D. Click Back to reconfigure the kdriver parameters
Answer: A

EMC参考書   E22-275   E22-275   E22-275参考書   E22-275練習問題

NO.9 You are installing the RecoverPoint splitter agent on a B-Series switch. After downloading the agent
binary file to the blade processor, which step must be completed prior to successfully running the
command?
A. chmod +x agent_binary_file
B. chmod +rw agent_binary_file
C. /thirdparty/recoverpoint/install/zoning_script.sh
D. /thirdparty/recoverpoint/install/kdrv start
Answer: A

EMC認定資格   E22-275   E22-275   E22-275

NO.10 A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use
of dual stack for its LAN network connection.
How many IP addresses should the customer plan for per site, including management IP addresses.?
A. 5
B. 6
C. 7
D. 8
Answer: D

EMC   E22-275   E22-275練習問題   E22-275   E22-275   E22-275認定資格

NO.11 You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would
you run the thirdparty/recoverpoint/install/kdrv status command to verify the status of the kdriver on the
switch?
A. As root in the blade processor
B. As admin in the blade processor
C. As root in the control processor
D. As admin in the control processor
Answer: A

EMC参考書   E22-275認定試験   E22-275   E22-275   E22-275

NO.12 You want to upgrade a RecoverPoint environment using Deployment Manager (DM). As a prerequisite
to continuing with the upgrade, which TCP port needs to be open between the management station where
the DM is installed and the RPA management IP addresses?
A. 22
B. 23
C. 80
D. 161
Answer: A

EMC参考書   E22-275認証試験   E22-275   E22-275認定証

NO.13 In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?
A. 1
B. 2
C. 3
D. 4
Answer: B

EMC認証試験   E22-275   E22-275   E22-275練習問題

NO.14 Which device allows the installation of a Brocade splitter into a DCX director?
A. PB-48k-18i
B. PB-48k-AP
C. PB-DCX-32P-E
D. PB-DCX-48P-8G
Answer: B

EMC   E22-275認証試験   E22-275過去問   E22-275問題集   E22-275

NO.15 What is the blade processor in a Brocade splitter?
A. A separate command shell which loads and operates the splitter
B. A special slot in a Brocade director with intelligent switch capabilities
C. A daughterboard in the switch to allow RecoverPoint integration
D. A dedicated memory space in the RPA to integrate with a Brocade switch
Answer: A

EMC認証試験   E22-275   E22-275練習問題   E22-275   E22-275認定証

NO.16 In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site.
What impact does this have on replication?
A.Site 1 to Site 2 replication fails Site 2 to Site 3 replication fails
B.Site 1 to Site 2 replication fails Site 2 to Site 3 replication continues
C.Site 1 to Site 2 replication fails Site 1 to Site 3 replication continues
D.Site 2 to Site 3 replication fails Site 1 to Site 3 replication continues
Answer: A

EMC   E22-275過去問   E22-275認定証   E22-275

NO.17 Refer to the Exhibit.
You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you
have run the data collect and are reviewing the system log files for the CGs.
What is a possible root cause for this High Load period?
A. The preferred RPA has lost communications with the remote RPA and caused a failover of the CG
within the cluster.
B. The local site has lost connectivity to the remote site and caused the CG to go into Marking mode.
C. There is no journal assigned to the CG in the local site, causing latency build up during data transfer.
D. The copies are cross-connected between the sites causing additional I/O to flood the connectivity
between the sites.
Answer: A

EMC参考書   E22-275   E22-275

NO.18 You have a customer with an EMC VNX array at each site that uses both block and file storage. They
would like to use the VNX splitter to replicate all their iSCSI data LUNs.
How would you configure RecoverPoint?
A. Use the Consistency Group Wizard to create a CG
B. Use Installation Manager and "Expose" all iSCSI LUNs
C. Check the "Enable iSCSI Replication" option in the CG profile
D. Replication of iSCSI LUNs are not supported at this time
Answer: A

EMC   E22-275認定試験   E22-275認定資格   E22-275   E22-275

NO.19 A customer has a RecoverPoint environment defined with two RPAs at each site. They created two
consistency groups (CGs), each one in a different RPA. Their business requires that both consistency
groups act as a single unit as they are dependent on one another.
How can they achieve this requirement?
A. Create one Group Set for both CGs
B. Enable the RecoverPoint Snapshot Consolidation feature
C. Select the same primary RPA for both CGs
D. Configure distributed consistency groups
Answer: A

EMC認定試験   E22-275   E22-275   E22-275   E22-275過去問   E22-275認証試験

NO.20 You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site.
If the customer's environment makes use of an EMC VNX array, what needs to be considered?
A. Selected LUN will be formatted
B. Use of a thin provisioned LUN is supported
C. LUN is accessible by only one RPA
D. Thin LUNs have to be pre-allocated
Answer: A

EMC認定試験   E22-275練習問題   E22-275

IT-Passports.comのEMCのE22-275試験トレーニング資料はあなたがリスクフリー購入することを保証します。購入する前に、あなたはIT-Passports.comが提供した無料な一部の問題と解答をダウンロードして使ってみることができます。IT-Passports.comの問題集の高品質とウェブのインタ—フェ—スが優しいことを見せます。それに、我々は一年間の無料更新サービスを提供します。失敗しましたら、当社は全額で返金して、あなたの利益を保障します。IT-Passports.comが提供した資料は実用性が高くて、絶対あなたに向いています。

没有评论:

发表评论