2014年1月23日星期四

JuniperのJN0-331の試験問題集が登場します

IT認証資料を提供したほかのサイトより、IT-Passports.comのプロかつ高品質の製品は最高のものです。IT-Passports.comを選んだら成功を選んだということです。IT-Passports.comのJuniperのJN0-331試験トレーニング資料はあなたが成功への保証です。IT-Passports.comを利用したら、あなたはきっと高い点数を取ることができ、あなたの理想なところへと進むことができます。

IT-Passports.comのJuniperのJN0-331試験トレーニング資料は受験生が模擬試験場で勉強させます。受験生は問題を選べ、テストの時間もコントロールできます。IT-Passports.comというサイトで、あなたはストレスと不安なく試験の準備をすることができますから、一般的な間違いを避けられます。そうしたら、あなたは自信を得ることができて、実際の試験で経験を活かして気楽に合格します。

IT-Passports.comを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。IT-Passports.comはJuniper JN0-331認証試験を助けって通じての最良の選択で、100%のJuniper JN0-331認証試験合格率のはIT-Passports.com最高の保証でございます。君が選んだのはIT-Passports.com、成功を選択したのに等しいです。

試験番号:JN0-331問題集
試験科目:Juniper 「SEC,Specialist(JNCIS-SEC)」
問題と解答:全131問

IT-Passports.comが提供した問題集をショッピングカートに入れて100分の自信で試験に参加して、成功を楽しんで、一回だけJuniperのJN0-331試験に合格するのが君は絶対後悔はしません。

JuniperのJN0-331試験に合格することは容易なことではなくて、良い訓練ツールは成功の保証でIT-Passports.comは君の試験の問題を準備してしまいました。君の初めての合格を目標にします。

多くの人々は高い難度のIT認証試験に合格するのは専門の知識が必要だと思います。それは確かにそうですが、その知識を身につけることは難しくないとといわれています。IT業界ではさらに強くなるために強い専門知識が必要です。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-331.html

NO.1 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE

Juniper参考書   JN0-331参考書   JN0-331参考書   JN0-331   JN0-331認定試験

NO.2 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD

Juniper   JN0-331   JN0-331

NO.3 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC

Juniper練習問題   JN0-331認証試験   JN0-331   JN0-331

NO.4 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

Juniper認定試験   JN0-331   JN0-331認定証

NO.5 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

Juniper認証試験   JN0-331参考書   JN0-331参考書   JN0-331

NO.6 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D

Juniper   JN0-331認定試験   JN0-331練習問題   JN0-331認証試験

NO.7 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD

Juniper   JN0-331認定資格   JN0-331

NO.8 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A

Juniper   JN0-331問題集   JN0-331認定資格   JN0-331

NO.9 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D

Juniper   JN0-331練習問題   JN0-331   JN0-331

NO.10 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B

Juniper認定証   JN0-331認定試験   JN0-331問題集   JN0-331

NO.11 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC

Juniper問題集   JN0-331認定資格   JN0-331

NO.12 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD

Juniper問題集   JN0-331   JN0-331過去問   JN0-331過去問

NO.13 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D

Juniper認証試験   JN0-331   JN0-331認証試験   JN0-331

NO.14 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C

Juniper   JN0-331問題集   JN0-331

NO.15 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD

Juniper認定試験   JN0-331問題集   JN0-331   JN0-331認定試験

NO.16 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D

Juniper過去問   JN0-331過去問   JN0-331認証試験

NO.17 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C

Juniper認証試験   JN0-331認定試験   JN0-331   JN0-331認証試験

NO.18 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE

Juniper練習問題   JN0-331   JN0-331認定試験   JN0-331

NO.19 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C

Juniper認証試験   JN0-331   JN0-331   JN0-331問題集

NO.20 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

Juniper   JN0-331練習問題   JN0-331   JN0-331   JN0-331認定資格

IT-Passports.comの専門家チームは彼らの経験と知識を利用して長年の研究をわたって多くの人は待ちに待ったJuniperのJN0-331認証試験について教育資料が完成してから、大変にお客様に歓迎されます。IT-Passports.comの模擬試験は真実の試験問題はとても似ている専門家チームの勤労の結果としてとても値打ちがあります。

没有评论:

发表评论