2014年10月6日星期一

300-101復習資料、700-280全真模擬試験、642-832日本語学習資料

IT-Passports.com のCiscoの300-101問題集は最も徹底的で、最も正確で、かつアップ·ツー·デートなものです。当面の市場であなたに初めて困難を乗り越える信心を差し上げられるユニークなソフトです。Ciscoの300-101認証試験は世界でどの国でも承認されて、すべての国が分け隔てをしないの試験です。IT-Passports.com のCiscoの300-101認証証明書はあなたが自分の知識と技能を高めることに助けになれることだけでなく、さまざまな条件であなたのキャリアを助けることもできます。IT-Passports.com のCiscoの300-101問題集を利用することをお勧めいたします。

全てのIT専門人員はCiscoの700-280の認定試験をよく知っていて、その難しい試験に受かることを望んでいます。Ciscoの700-280の認定試験の認可を取ったら、あなたは望むキャリアを得ることができるようになります。IT-Passports.comのCiscoの700-280試験トレーニング資料を利用したら、望むことを取得できます。

あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。IT-Passports.com Ciscoの642-832日本語試験問題集はあなたが自分の目標を達成することを助けられます。IT-Passports.com Ciscoの642-832日本語問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の100パーセント真実な解答を提供することを保証します。

話と行動の距離はどのぐらいありますか。これは人の心によることです。意志が強い人にとって、行動は目と鼻の先にあるのです。あなたはきっとこのような人でしょう。Ciscoの300-101認定試験に申し込んだ以上、試験に合格しなければならないです。これもあなたの意志が強いことを表示する方法です。IT-Passports.comが提供したトレーニング資料はインターネットで最高のものです。Ciscoの300-101認定試験に合格したいのなら、IT-Passports.comのCiscoの300-101試験トレーニング資料を利用してください。

試験番号:300-101 学習教材
試験科目:Implementing Cisco IP Routing (ROUTE v2.0)
問題と解答:全661問

>>詳しい紹介はこちら

試験番号:700-280 全真模擬試験
試験科目:Email Security for Field Engineers
問題と解答:全64問

>>詳しい紹介はこちら

試験番号:642-832日本語 資格認定
試験科目:Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) (642-832日本語版)
問題と解答:全70問

>>詳しい紹介はこちら

IT-Passports.comを通じて最新のCiscoの700-280試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。

IT-Passports.comが提供したCiscoの700-280トレーニング資料はシミュレーションの度合いがとても高いでから、実際の試験で資料での同じ問題に会うことができます。これは当社のITエリートの団体はすごい能力を持っていることが説明されました。現在、野心家としてのIT職員がたくさんいて、自分の構成ファイルは市場の需要と互換性があることを確保するために、人気があるIT認証試験を通じて自分の夢を実現します。そのようなものとして、Ciscoの700-280試験はとても人気がある認定試験です。IT-Passports.comが提供したCiscoの700-280トレーニング資料を手にすると、夢への扉はあなたのために開きます。

IT-Passports.comのIT業界専門家チームは彼らの経験と知識を利用して絶えないな試験対策材料の品質を高めて、受験者の需要を満たして、受験者のはじめてCisco 300-101試験を順調に合格するを保証します。あなた達はIT-Passports.comの商品を購入してもっともはやく正確に試験に関する情報を手に入れます。IT-Passports.comの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。そして、試験を安心に参加してください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/300-101.html

NO.1 By default, which statement is correct regarding the redistribution of routes from other
routing protocols into OSPF?
A. They will appear in the OSPF routing table as type E1 routes.
B. They will appear in the OSPF routing table as type E2 routes.
C. Summarized routes are not accepted.
D. All imported routes will be automatically summarized when possible.
E. Only routes with lower administrative distances will be imported.
Answer: B

Cisco特典   300-101費用   300-101ふりーく   300-101対策
Explanation:
Explanation Type E1 external routes calculate the cost by adding the external cost to the internal
cost of each link that the packet crosses while the external cost of E2 packet routes is always the
external cost only. E2 is useful if you do not want internal routing to determine the path. E1 is useful
when internal routing should be included in path selection. E2 is the default external metric when
redistributing routes from other routing protocols into OSPF.

NO.2 A ABC Company network administrator is troubleshooting an EIGRP configuration across a
discontiguous network. What must the administrator do to ensure all of the ABC Company routers
have the correct routing information?
A. The administrator must enable classless routing with the command "ip classless"
B. The administrator must disable automatic summarization with the command "no auto-summary"
C. The administrator must specify a default network with the command "ip default-network"
D. Nothing, EIGRP supports discontiguous networks by default.
E. The administrator must enable manual summarization with the command "ip summary-address"
F. None of the other alternatives apply
Answer: B

Cisco関節   300-101特典   300-101クラムメディア

NO.3 Which command displays the IBGP and EBGP neighbors that are configured?
A. show ip bgp paths
B. show ip bgp peers
C. show ip bgp
D. show ip bgp summary
Answer: D

Cisco過去   300-101認定証   300-101取得   300-101内容
Explanation:
Show ip bgp summary command displays the summary of all BGP connections.

NO.4 An Enterprise router, Ent1, displays the following excerpt from the show ip bgp command.
ENT1 has an eBGP connection to an ISP router with address 3.3.3.3 and an
iBGP connection to a router with address 4.4.4.4. Which of the following is most likely to be true?
Network Next Hop Metric LocPrf Weight Path
*> 3.3.3.3 0 0 1 1 1 1 2
18 i
A. The Enterprise likely uses ASN 1.
B. The neighboring ISP likely uses ASN 1.
C. The route has been advertised through ASN 1 multiple times.
D. Router Ent1 will add another ASN to the AS_Path before advertising this route to its iBGP peer
(4.4.4.4).
Answer: B

Cisco   300-101取得   300-101テスト   300-101認定試験   300-101   300-101認定
Explanation:
The output shows the results of AS_Path prependinG. The repetitive 1's cannot mean that the route
has been advertised into and out of the same ASN repeatedly because loop prevention would have
prevented such an advertisement. With AS_Path prepending, the neighboring ASN typically adds its
own ASN to the end of the AS_Path (as listed on the left of the output).

NO.5 IPv6 has been implemented on the ABC Company WAN. Which address type does the IPv6
address FF05:0:0:0:0:0:0:2 specify?
A. Site local unicast
B. Multicast
C. Link local
D. Aggregable global unicast
E. Unspecified
F. None of the other alternatives apply
Answer: B

Cisco認定試験   300-101   300-101認定   300-101割引

NO.6 Refer to the exhibit. Which command would verify if PBR reacts to packets sourced from
172.16.0.0/16?
Select the best response.
A. show ip route
B. show policy-map
C. show access-lists
D. show route-map
Answer: D

Cisco受験記   300-101   300-101教科書   300-101参考書   300-101

NO.7 A stub area is typically created using what kind of topology?
A. Broadcast
B. Point-to-point
C. Hub and spoke
D. Full Mesh
Answer: C

Cisco学習   300-101費用   300-101虎の巻
Explanation:
A stub area is typically created when you have a hub-and-spoke topology, with the spoke being the
stub area, such as a branch ofce. In this case, the branch ofce does not need to know about every
network at the headquarters site; instead, it can use a default route to get there.

NO.8 R1 has 5 working interfaces, with EIGRP neighbors existing off each interface. R1 has routes for
subnets 10.1.1.0/ 24, 10.1.2.0/ 24, and 10.1.3.0/ 24, with EIGRP integer metrics of roughly 1 million, 2
million, and 3 million, respectively. An engineer then adds the ip summary-address eigrp 1
10.1.0.0 255.255.0.0 command to interface Fa0/ 0. Which of the following is true?
A. R1 loses and then reestablishes neighborships with all neighbors.
B. R1 no longer advertises 10.1.1.0/ 24 to neighbors connected to Fa0/ 0.
C. 1 advertises a 10.1.0.0/16 route out Fa0/ 0, with metric of around 3 million (largest metric of
component subnets).
D. R1 advertises a 10.1.0.0/16 route out Fa0/ 0, with metric of around 2 million (median metric of
component subnets).
Answer: B

Cisco日記   300-101スクール   300-101特典
Explanation:
The ip summary-address command does reset neighborships, but only on the interface under which
it is configured. After those neighborships come up, R1 will advertise the summary route, but none
of the subordinate routes inside that summary. The summary route will us a metric equal to the
metric of the lowest metric subordinate route, approximately 1,000,000 in this casE.

没有评论:

发表评论