IT-Passports.comが提供したIBMのA2010-577の試験トレーニング資料は受験生の皆さんの評判を得たのはもうずっと前のことになります。それはIT-Passports.comのIBMのA2010-577の試験トレーニング資料は信頼できるもので、確実に受験生を助けて試験に合格するということを証明しました。IT-Passports.comが提供したIBMのA2010-577の試験トレーニング資料はベストセラーになって、ずっとピアの皆をリードしています。IT-Passports.comは消費者の皆さんの許可を得て、評判が良いです。IBMのA2010-577の認証試験を受けたら、速くIT-Passports.comというサイトをクッリクしてください。あなたがほしいものを得ることができますから、ミスしないだけで後悔しないです。最も専門的な、最も注目を浴びるIT専門家になりたかったら、速くショッピングカートに入れましょう。
成功した方法を見つけるだけで、失敗の言い訳をしないでください。IBMのA2010-577試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。IT-Passports.comのIBMのA2010-577試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。
試験番号：A2010-577問題集
試験科目：IBM 「Assess: IBM Tivoli Endpoint Manager V8.2 Implementation」
問題と解答：全115問
A2010-577認定試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。それはIT-Passports.comのA2010-577問題集を利用することです。
あなたはいまIBMのA2010-577認定試験にどうやって合格できるかということで首を傾けているのですか。IBMのA2010-577認定試験は現在のいろいろなIT認定試験における最も価値のある資格の一つです。ここ数十年間では、インターネット・テクノロジーは世界中の人々の注目を集めているのです。それがもう現代生活の不可欠な一部となりました。その中で、IBMの認証資格は広範な国際的な認可を得ました。ですから、IT業界で仕事している皆さんはIBMの認定試験を受験して資格を取得することを通して、彼らの知識やスキルを向上させます。A2010-577認定試験はIBMの最も重要な試験の一つです。この資格は皆さんに大きな利益をもたらすことができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/A2010-577.html
NO.1 Power Management has recently been added to the IBM Tivoli Endpoint Manager
(TEM) license. What
is the first step to view the site contents in the console?
A. Launch the TEM Administration Tool and enable the site under the Masthead
Management tab
B. Choose the Power Management site from the external site listing and specifically
subscribe the TEM
server
C. Choose the Power Management site from the external site listing and subscribe any
Windows
computer
D. Enable the Power Management site under the License Overview dashboard within the
BigFix Management domain
Answer: D
IBM A2010-577 A2010-577認定試験 A2010-577参考書
NO.2 How is an IBM Tivoli Endpoint Manager (TEM) client system most efficiently promoted
to a relay?
A. Manually run the reiayinstaill.exe package on the desired system
B. All TEM clients are already relays so no additional configuration is necessary
C. Use the relay install task from the TEM Console to install the relay on the desired system
D. Create a fixlet using the TEM Software Distribution tool to distribute and execute the relay
install on the
desired system
Answer: C
IBM認証試験 A2010-577 A2010-577認定試験 A2010-577過去問
NO.3 Which action must be taken to configure the IBM Tivoli Endpoint Manager (TEM) BES
Server Plugin
Service to access the Web Reports SOAP API?
A. Run the TEM task Enable Web Reports SOAP API
B. Setup the appropriate registry settings for the SOAP username, password, and URL
C. Access the TEM Administration Tool to modify the Masthead to enable the Web Reports
SOAP API
D. Access the TEM Console as a master operator and select File > Preferences and enable
the Web
Reports SOAP API
Answer: B
IBM A2010-577 A2010-577過去問 A2010-577認定試験
NO.4 By default which TCP port needs to be opened on the external firewall to allow an
Internet-based client
to reach the Internet DMZ relay?
A. Port 80 inbound to the relay with return traffic allowed
B. Port 52311 inbound to the relay with return traffic allowed
C. Port 80 inbound to the relay with return traffic allowed / outbound to the client with return
traffic allowed
D. Port 52311 inbound to the relay with return traffic allowed / outbound to the client with
return traffic
allowed
Answer: B
IBM A2010-577認定資格 A2010-577 A2010-577問題集
NO.5 Which two non-Windows operating systems are supported for IBM Tivoli Endpoint
Manager relays?
(Choose two.)
A. zLinux
B. HP-UX
C. Mac OS
D. Solaris 10
E. Red Hat Enterprise Linux
Answer: D,E
IBM A2010-577認定証 A2010-577過去問
NO.6 How is the BES Gather Service configured to use a service account?
A. Edit the properties for the BES Gather Service and set the service to Log on as: to use the
service
account service account ID and password
B. Make a custom copy of BES Support task 125 and in the custom copy edit the action
script with the
account information, save the custom copy to the Master Action Site, and deploy to the main
TEM server
C. During the deployment planning phase the IBM Tivoli Endpoint Manager (TEM) sales
person should
have provided a custom BESGatherService.vbs file; run the vbs file on the TEM server to
configure
gathering
D. Open the Windows Registry on the TEM server, go to
HKEY_LOCAL_MACHINE\SOFTWARE\BigFix\Enterprise Server/GatherService, and set the
String
Value Logon Info to use the service account name and password
Answer: A
IBM認定資格 A2010-577 A2010-577 A2010-577練習問題 A2010-577過去問 A2010-577
NO.7 What is a supported database platform for IBM Tivoli Endpoint Manager V8.2?
A. Oracle 9i
B. IBMDB2 9.2
C. MySQL 5.5.20
D. Microsoft SQL Server 2008
Answer: D
IBM A2010-577認定証 A2010-577認証試験 A2010-577認定資格
NO.8 IBM Tivoli Endpoint Manager for Software Usage Analysis V1.3 users are divided into
four essential
roles. What are they?
A. Administrators, Users, Read Only, Operators
B. Administrators, Operators, Users, DBAdmins
C. Operators, Master Operators. Administrators, DBAdmins
D. Administrators, Catalog Editors, Contract Editors, Normal Users
Answer: D
IBM A2010-577 A2010-577 A2010-577 A2010-577参考書 A2010-577過去問
NO.9 How are systems added to a Manual Group within the IBM Tivoli Endpoint Manager
Console?
A. Drag and drop the computer into the Manual Group
B. Drag and drop the Manual Group onto the computer
C. Right-click the computer and choose Add to Manual Group
D. Right-click the Manual Group and choose Add Computer to Manual Group
Answer: C
IBM認証試験 A2010-577 A2010-577過去問 A2010-577参考書 A2010-577
NO.10 The IT operations team wants to install IBM Tivoli Endpoint Manager (TEM) in a
network where proxy
Internet access is required. The proxy requires a non-Windows credential to be entered each
time the
Internet is accessed. Where is this registry key set:
[HKEY_LOCAL_MACHINE\SOFTWARE\BigFix\Enterprise ServertGatherService]?
A. On the TEM server
B. On the Top Level Relay
C. On the Internet DMZ relay
D. On a client with direct Internet access
Answer: A
IBM認定試験 A2010-577認証試験 A2010-577参考書 A2010-577認定資格
NO.11 Which dashboard can be used to check the number of unreachable endpoints?
A. License Overview
B. Deployment Overview
C. Client Health Overview
D. Deployment Health Checks
Answer: D
IBM練習問題 A2010-577 A2010-577認証試験 A2010-577 A2010-577
NO.12 The Message Level Encryption feature of IBM Tivoli Endpoint Manager V8.2 (TEM)
increases security
but adds an additional load to the environment. What system hardware changes should be
made to the
TEM environment to accommodate the additional load?
A. Add more RAM to the relays and clients
B. Add more disk space to the TEM server and clients
C. Add more RAM to the TEM server or decrypting relay
D. Add more processing power to the TEM server or decrypting relay
Answer: D
IBM A2010-577 A2010-577 A2010-577
NO.13 Internet access must be configured through a proxy server in order for the IBM Tivoli
Endpoint
Manager (TEM) server to download Windows patches from the Internet. How is this
accomplished?
A. The TEM server does not need Internet access. Content can only be added manually.
B. Configure the BES Gather Service to use a service account that has open access to the
Internet.
C. Configure specific proxy server rules only permitting the TEM clients to go to specific
domains such as
Microsoft.com or Adobe.com.
D. In the Window's registry set the BES Gather Service to bypass proxy server for local
address. Restart
the BES Gather Service when finished so changes will take effect.
Answer: B
IBM A2010-577認定証 A2010-577 A2010-577 A2010-577認定試験
NO.14 By default, when will Automatic Relay Selection on the client occur?
A. Upon every reboot
B. Once every 6 hours
C. Once every 24 hours
D. Once every 12 hours
Answer: B
IBM過去問 A2010-577認定試験 A2010-577 A2010-577 A2010-577
NO.15 For a scheduled activity in the IBM Tivoli Endpoint Manager (TEM) Web Reports that
has Archive
selected as the activity action, where does the archive information get stored by default?
A. It gets e-mailed to TEM Web Reports admin
B. In the main TEM server database (BFEnterprise)
C. In the TEM Web Reports database (BFReporting)
D. On the file system of the TEM Web Reports server
Answer: D
IBM A2010-577認定証 A2010-577認定証
NO.16 Which file(s) does an IBM Tivoli Endpoint Manager (TEM) client need to download as
part of an action
to migrate from one TEM server to another?
A. License certificate of the new TEM server only
B. New TEM server master operator private key files
C. Action Site Masthead of the new TEM server only
D. License certificate of the old TEM server and license certificate of the new TEM server
Answer: C
IBM認定試験 A2010-577 A2010-577 A2010-577
NO.17 Which tool does IBM Tivoli Endpoint Manager use to discover assets on a network(s)?
A. Nmap
B. Wireshark
C. IBM Tivoli Network Node Manager
D. IBM Tivoli Asset Discovery for Distributed
Answer: A
IBM A2010-577 A2010-577過去問 A2010-577認定試験 A2010-577
NO.18 This action script is run:
regset "[HKEY_CURRENT_USER\Software\Test]" "testString" = "testValue"
In the fixlet debugger, the key gets correctly created under the HKEY_CURRENTJJSER
branch.
However, when running the same action by targeting the IBM Tivoli Endpoint Manager (TEM)
client in the
TEM Console, the agent states that the action ran to completion but the same key is not
there. What is the
reason for this discrepancy?
A. The TEM client reported action completion in error.
B. Some action script commands, like regset, work only in the fixlet debugger.
C. The fixlet debugger is more forgiving when it comes to proper action script form.
D. The fixlet debugger runs under the users' context; the TEM client runs as LocalSystem.
Answer: D
IBM認定資格 A2010-577 A2010-577 A2010-577 A2010-577過去問
NO.19 In the IBM Tivoli Endpoint Manager (TEM) Console under the Debug menu, which
option allows the
testing of a session relevance statement?
A. Fixlet Debugger
B. TEM Diagnostics
C. Domain Debugger
D. Presentation Debugger
Answer: D
IBM A2010-577 A2010-577 A2010-577 A2010-577過去問
NO.20 What is the IBM Tivoli Endpoint Manager (TEM) Maintenance Window Dashboard used
for?
A. To perform maintenance on the TEM database
B. To schedule hardware maintenance, when required, on the TEM server
C. To define time windows in which TEM will perform actions on target systems
D. To determine when the TEM server will be unavailable due to required maintenance
Answer: C
IBM A2010-577認定証 A2010-577問題集 A2010-577認証試験
IT-Passports.comが提供する資料は比べものにならない資料です。これは前例のない真実かつ正確なものです。受験生のあなたが首尾よく試験に合格することを助けるように、当社のITエリートの団体はずっと探っています。IT-Passports.comが提供した製品は真実なもので、しかも価格は非常に合理的です。IT-Passports.comの製品を選んだら、あなたがもっと充分の時間で試験に準備できるように、当社は一年間の無料更新サービスを提供します。そうしたら、試験からの緊張感を解消することができ、あなたは最大のメリットを取得できます。
没有评论:
发表评论