難しい4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110認定試験に合格したいなら、試験の準備をするときに関連する参考書を使わないとダメです。自分に合っている優秀な参考資料がほしいとしたら、一番来るべき場所はIT-Passports.comです。IT-Passports.comの知名度が高くて、IT認定試験に関連するいろいろな優秀な問題集を持っています。それに、すべての4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110試験問題集に対する無料なdemoがあります。IT-Passports.comの4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110問題集があなたに適するかどうかを確認したいなら、まず問題集のデモをダウンロードして体験してください。
Alcatel-Lucentの4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110試験にもっと首尾よく合格したいのですか。そうしたら速くIT-Passports.comを選びましょう。IT-Passports.comは様々なIT認証試験を受ける人々に正確な試験資料を提供するサイトです。IT-Passports.comはIT職員としてのあなたに昇進するチャンスを与えられます。IT-Passports.com が提供したAlcatel-Lucentの4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110試験に関する一部の無料の問題と解答を利用してみることができます。そうすると、我々の信頼性をテストできます。
IT-Passports.comは受験者に向かって試験について問題を解決する受験資源を提供するサービスのサイトで、さまざまな受験生によって別のトレーニングコースを提供いたします。受験者はIT-Passports.comを通って順調に試験に合格する人がとても多くなのでIT-Passports.comがIT業界の中で高い名声を得ました。
試験番号：4A0-108問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Multicast Protocols」
問題と解答：全122問
試験番号：4A0-105問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Virtual Private LAN Services」
問題と解答：全59問
試験番号：4A0-104問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Services Architecture」
問題と解答：全141問
試験番号：4A0-103問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Multiprotocol Label Switching」
問題と解答：全98問
試験番号：4A0-101問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Interior Routing Protocols and High Availability」
問題と解答：全177問
試験番号：4A0-110問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Advanced Troubleshooting」
問題と解答：全40問
人間ができるというのは、できることを信じるからです。IT-Passports.comは IT職員を助けられるのは職員の能力を証明することができるからです。IT-Passports.comのAlcatel-Lucentの4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110試験はあなたが成功することを助けるトレーニング資料です。Alcatel-Lucentの4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110認定試験に受かりたいのなら、IT-Passports.com を選んでください。時には、成功と失敗の距離は非常に短いです。前へ何歩進んだら成功できます。あなたはどうしますか。前へ進みたくないですか。IT-Passports.comは成功の扉ですから、 IT-Passports.comを利用してください。
短い時間に最も小さな努力で一番効果的にAlcatel-Lucentの4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110試験の準備をしたいのなら、IT-Passports.comのAlcatel-Lucentの4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110試験トレーニング資料を利用することができます。IT-Passports.comのトレーニング資料は実践の検証に合格すたもので、多くの受験生に証明された１００パーセントの成功率を持っている資料です。IT-Passports.comを利用したら、あなたは自分の目標を達成することができ、最良の結果を得ます。
Alcatel-Lucentの4A0-108 4A0-105 4A0-104 4A0-103 4A0-101 4A0-110のオンラインサービスのスタディガイドを買いたかったら、IT-Passports.comを買うのを薦めています。IT-Passports.comは同じ作用がある多くのサイトでリーダーとしているサイトで、最も良い品質と最新のトレーニング資料を提供しています。弊社が提供したすべての勉強資料と他のトレーニング資料はコスト効率の良い製品で、サイトが一年間の無料更新サービスを提供します。ですから、弊社のトレーニング製品はあなたが試験に合格することを助けにならなかったら、全額で返金することを保証します。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-103.html
NO.1 Assume that, on the Alcatel-Lucent 7750 SR, an LSP is configured with one-to-one FRR and node
protection. Which of the following statements are FALSE? (Choose two)
A. Each PLR signals a detour LSP that avoids the downstream node. If the downstream node cannot be
avoided, a detour LSP that avoids the downstream link is signaled.
B. The detour LSP can take one or more hops before merging back on the protected LSP.
C. The merge point of the protected LSP must be the next-next-hop node
D. The ingress router will set the local protection desired flag in the session attribute object of the path
message to inform all routers along the protected LSP path to establish detour LSPs.
E. The label recording desired flag must be set in the session attribute object in order for the PLR to know
what label to swap when using the detour LSP.
Answer: C,E
Alcatel-Lucent認定試験 4A0-103認証試験 4A0-103
NO.2 Click on the exhibit button below.
Given the output below, which of the following statements are true? (Choose three)
A. A packet arriving with label 131066 and destined for prefix 10.10.10.243/32 will be forwarded out
interface 1/1/4, with label 131070.
B. LDP ECMP is enabled.
C. The router ¯ s sys t e m add r ess i s 10 . 10 . 10 . 242 / 32 .
D. There are multiple LSPs to reach FEC 10.10.10.244/32.
E. The router cannot receive any unlabeled packets destined for prefix 10.10.10 223/32.
Answer: A,B,D
Alcatel-Lucent認定試験 4A0-103 4A0-103
NO.3 You wish to advertise LDP labels for all local networks; which is the most effective policy statement to
use?
A. from prefix-list direct
B. match local
C. from protocol direct
D. match protocol direct
E. from protocol local
Answer: C
Alcatel-Lucent練習問題 4A0-103 4A0-103練習問題 4A0-103認定資格 4A0-103参考書
NO.4 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-Two protected LSPs with the path R1-R2-R3
-Both LSPs enable facility bypass and link protection.
When router R1 is the PLR, which router becomes the MP?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: B
Alcatel-Lucent 4A0-103認定証 4A0-103過去問 4A0-103
NO.5 What is the common usage of the MPLS EXP bits?
A. Each implementation can use them as they see fit.
B. They are used to carry the Ethertype value.
C. They are used to carry the TTL value.
D. They are used to carry QoS classification.
E. They are used to carry fragmentation flag information
Answer: D
Alcatel-Lucent 4A0-103問題集 4A0-103問題集
NO.6 Which command can be used to verify the LDP settings for label distribution and retention?
A. show router ldp default
B. show router ldp parameters
C. show router ldp settings
D. show router mpls settings
E. show router mpls label-options
Answer: B
Alcatel-Lucent 4A0-103認定証 4A0-103 4A0-103過去問
NO.7 During node protection signaling, the PLR knows the address of the MP from which of the following
methods?
A. The PLR issues a RSVP path message to the destination router to request the address of the MP.
B. The PLR learns the address of the MP from the ERO.
C. The PLR learns the address of the MP from the RRO
D. The PLR learns the address of the MP from the targeted RSVP hello message.
E. The PLR does not need to know the address of the MP.
Answer: C
Alcatel-Lucent 4A0-103 4A0-103 4A0-103
NO.8 Which of the following message types does RSVP use to set up an LSP? (Choose two)
A. Path message
B. iLER message
C. Resv message
D. LSP setup call request
E. eLER message
Answer: A,C
Alcatel-Lucent認定試験 4A0-103 4A0-103 4A0-103問題集 4A0-103 4A0-103参考書
NO.9 Which of the following statements best describes downstream unsolicited label distribution?
A. An LER may answer requests for label mappings immediately, without waiting for a label mapping from
the next-hop.
B. An LER may advertise label mappings to all peers for which it might be a next-hop for a given FEC.
C. An LER propagates a label mapping downstream for a FEC. only if it has a label mapping for the FEC
next-hop.
D. An LER will only distribute a label for a FEC when it has been requested to do so.
Answer: B
Alcatel-Lucent 4A0-103過去問 4A0-103認定証 4A0-103
NO.10 Which of the following indicates the path over which an LSP's tail end router will return an RSVP RESV
message?
A. The IGP FIB.
B. The Reservation State Block (RSB)
C. The Path State Block (PSB)
D. The opaque database.
Answer: C
Alcatel-Lucent 4A0-103認定証 4A0-103参考書 4A0-103
NO.11 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-The protected LSP path is R1-R2-R3.
-All links are of equal cost.
Which of the following statements is true? (Choose two)
A. Router R1 is the LSP originator and is also a PLR.
B. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R2-R3.
C. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R3.
D. If the R2-R3 link fails, router R3 becomes a PLR
E. None of the nodes can be protected with FRR.
Answer: A,C
Alcatel-Lucent認定証 4A0-103 4A0-103
NO.12 Which of the following is defined by the following statement? All label mappings received from all peer
LSRs are saved.
A. Conservative label retention
B. Liberal label retention.
C. Downstream on demand.
D. Downstream unsolicited.
Answer: B
Alcatel-Lucent 4A0-103 4A0-103認定試験 4A0-103
NO.13 Click on the exhibit button below.
Consider the following:
-Routers R1 and R4 are in Area 1.
-Routers R4 and R5 in Area 0.
-Routers R5 and R3 are in Area 2.
To support LDP-over-RSVP tunnels between routers R1 and R3 over path R1-R4-R5-R3, with which
routers will router R5 require targeted sessions? (Choose two)
A. Router R1
B. Router R4
C. Router R2
D. Router R3
Answer: B,D
Alcatel-Lucent 4A0-103問題集 4A0-103認定資格 4A0-103参考書 4A0-103 4A0-103
NO.14 Click on the exhibit button below.
Given the configuration below, what is the system ID of the destination node?
A. 10.32.1.2
B. 10.1.478
C. 1048.1.1
D. Cannot tell from this configuration
E. 10.1.2.2
Answer: B
Alcatel-Lucent問題集 4A0-103問題集 4A0-103
NO.15 Which of the following statements best describe MPLS fast reroute characteristics? (Choose two)
A. Fast reroute requires you to manually define detour paths.
B. Fast reroute provides path protection close to the failure point
C. Fast reroute performs automatic path calculation and signaling.
D. Fast reroute protects both primary and secondary paths.
Answer: B,C
Alcatel-Lucent参考書 4A0-103認定証 4A0-103
NO.16 Click on the exhibit button below.
Assuming that LSP R1-R2-R3 requests the default fast reroute configuration, which router becomes a
DMP for the detour tunnels?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: E
Alcatel-Lucent 4A0-103認定試験 4A0-103認定試験 4A0-103練習問題 4A0-103
NO.17 In MPLS, labels are distributed in the opposite direction of the data flow.
A. TRUE
B. FALSE
Answer: A
Alcatel-Lucent 4A0-103 4A0-103問題集
NO.18 Router R3 signals an LSP, reserving 1Gbps bandwidth on a 10Gbps link. RSVP configuration limits
reservable bandwidth to 20 percent on the egress interface. Which of the following statements is true?
A. The egress RSVP interface has 80 percent bandwidth unreserved.
B. LSPs can reserve an additional 9.9 Gbps bandwidth on this RSVP interface.
C. The head end reserves 100Mbps for the LSP
D. The egress RSVP interface has 1 Gbps bandwidth unreserved.
Answer: D
Alcatel-Lucent 4A0-103練習問題 4A0-103認定資格 4A0-103 4A0-103
NO.19 Which of the following statements regarding LSP path configuration are true? (Choose three)
A. The path must include at least one hop.
B. The path may be used multiple times in a single LSP.
C. The path may comprise loose hop entries only.
D. The path must define the LSP's tail end.
E. The path may be used for multiple LSPs.
Answer: C,E
Alcatel-Lucent認証試験 4A0-103 4A0-103
NO.20 What is the significance of receiving a packet with the bottom MPLS label S bit set to 1?
A. It results in forwarding based on the next packet header.
B. It indicates that the label is the bottom of the MPLS label stack.
C. It indicates that the label is the top of the MPLS label stack.
D. Any LSR that receives an S bit set to 1 must discard the packet.
Answer: B
Alcatel-Lucent過去問 4A0-103認定資格 4A0-103 4A0-103認定証 4A0-103
没有评论:
发表评论