一つの試験だけでは多くの時間を無駄にする必要がありません。ST0-237 ST0-202 850-001 ST0-200 ST0-199認定試験が大変難しいと感じて、多くの時間を取らなければならないとしたら、ツールとしてIT-Passports.comのST0-237 ST0-202 850-001 ST0-200 ST0-199問題集を利用したほうがいいです。この問題集はあなたに時間を節約させることができますから。もっと重要なのは、この問題集はあなたが試験に合格することを保証できますから。この問題集よりもっと良いツールは何一つありません。試験の準備をするのにたくさんの時間を無駄にするより、そんな時間を利用してもっと有意義なことをしたほうがいいです。ですから、はやくIT-Passports.comのサイトに行ってもっと多くの情報を読みましょう。この素晴らしきチャンスを逃したらきっと後悔しますよ。
IT業種のSymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199認定試験に合格したいのなら、IT-Passports.com SymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199試験トレーニング問題集を選ぶのは必要なことです。SymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199認定試験に受かったら、あなたの仕事はより良い保証を得て、将来のキャリアで、少なくともIT領域であなたの技能と知識は国際的に認知され、受け入れられるです。これも多くの人々がSymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199認定試験を選ぶ理由の一つです。その理由でこの試験はますます重視されるになります。IT-Passports.com SymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199試験トレーニング資料はあなたが上記の念願を実現することを助けられるのです。IT-Passports.com SymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199試験トレーニング資料は豊富な経験を持っているIT専門家が研究したもので、問題と解答が緊密に結んでいますから、比べるものがないです。高い価格のトレーニング授業を受けることはなくて、IT-Passports.com SymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199試験トレーニング資料をショッピングカートに入れる限り、我々はあなたが気楽に試験に合格することを助けられます。
IT-Passports.comはSymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199認定試験に便利なサービスを提供するサイトで、従来の試験によってIT-Passports.com が今年のSymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199認定試験を予測してもっとも真実に近い問題集を研究し続けます。
試験番号：ST0-237問題集
試験科目：Symantec 「Symantec Data Loss Prevention 12 Technical Assessment」
問題と解答：全300問
試験番号：ST0-202問題集
試験科目：Symantec 「Symantec Mobile Management Suite (CMS/ITMS) (March 2013) STS」
問題と解答：全140問
試験番号：850-001問題集
試験科目：Symantec 「Cloud Security 1.0」
問題と解答：全92問
試験番号：ST0-200問題集
試験科目：Symantec 「Symantec System Recovery 2013 Technical Assessment」
問題と解答：全112問
試験番号：ST0-199問題集
試験科目：Symantec 「Symantec Messaging Gateway 10.0 Technical Assessment 」
問題と解答：全121問
最もリラックスした状態ですべての苦難に直面しています。SymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199試験はとても難しいですが、受験生の皆がリラックスした状態で試験を受けるべきです。。IT-Passports.comのSymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199試験トレーニング資料は私達を助けられます。IT-Passports.comがそばにいてくれると、恐くなくなり、迷わなくなります。IT-Passports.comのSymantecのST0-237 ST0-202 850-001 ST0-200 ST0-199試験トレーニング資料は私達受験生の最良の選択です。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/ST0-237.html
NO.1 Which rule will you use to discover disabled controllers failures in the Storage Foundation
5.0 environment?
A. vxse_host
B. vxse_disk
C. vxse_disklog
D. vxse_dc_failures
Answer: D
Symantec ST0-237 ST0-237 ST0-237 ST0-237練習問題
NO.2 You need to create a volume for the HR department. You need to mount a file system with a
high demand for I/O throughput. You are aware that spanning the volume across multiple disks will
increase the I/O performance.Which risk should you be aware of when spanning the volume across
multiple disks?
A. Write throughput degradation
B. Single disk failure causes volume failure
C. Requirement for disk redundancy
D. Poor I/O performance
Answer: B
Symantec認証試験 ST0-237問題集 ST0-237 ST0-237 ST0-237認定試験
NO.3 After installing Veritas Enterprise Administrator, you start the VEA with the profile name that
you have specified.When you click the Console View, what does it display? (Select two.)
A. Active Events
B. Volume Summary
C. Alerts
D. Disk History
Answer: A,C
Symantec認定資格 ST0-237認定試験 ST0-237 ST0-237 ST0-237認定資格
NO.4 What is the minimum percentage of spare disks in a disk group?
A. 10%
B. 15%
C. 20%
D. 25%
Answer: A
Symantec参考書 ST0-237認定試験 ST0-237 ST0-237
NO.5 You have a system that has two disks-disk01 and disk02, which are mapped into the system
configuration during boot as disks c0t0d0s2 and c0t1d0s2, respectively. A failure has caused disk01
to become detached.What would you do to view the status of the failed disk01?
A. Use the vxdg list command
B. Use the vxdg -s list command
C. Use the vxprint command
D. Use the vxdisk list command
Answer: D
Symantec認定資格 ST0-237問題集 ST0-237認証試験 ST0-237
NO.6 Which two locations can the administrator verify a newly created policy was loaded on a
detection server? (Select two.)
A. System > Servers > Overview
B. System > Servers > Server Detail
C. Manage > Policies > Policy List
D. System > Servers > Overview > Configure Server
E. System > Servers > Events
Answer: B,E
Symantec ST0-237 ST0-237参考書 ST0-237 ST0-237認証試験
NO.7 A system administrator has a large amount of data that is not being accessed on the
company's storage devices. This excess amount of data is causing slow access to the active data. You
want to set up automatic relocation of data so that data expires as per its defined age.
What should you do?
A. Use the Data Movement Service (DMS) to set the threshold for automatic relocation of data.
B. Use the Quality of Storage Service (QoSS) to set the threshold for automatic relocation of data.
C. Use the Virtual Data Aging Service (VDAS) to set the threshold automatic relocation of data.
D. Use the Intelligent Volume Service (IVS) to set the threshold for automatic relocation of data.
Answer: B
Symantec ST0-237 ST0-237認定証 ST0-237認定証 ST0-237認証試験
NO.8 You are managing a Storage Foundation 5.0 server that has Storage Foundation Management
Server (SFMS) software installed. You force a placement policy to a file system using the Storage
Foundation Management Server (SFMS).
What is the outcome when a policy is forced to a file system?
A. The current policies of the file system are overwritten by the SFMS policies.
B. The file system will retain its policies and discard the SFMS policies.
C. The file system will incorporate the changes of both the policies.
D. The file system will apply the SFMS policies only in the case where its own policies cannot be
assigned.
Answer: A
Symantec ST0-237参考書 ST0-237認定証 ST0-237 ST0-237認定資格
NO.9 An incorrectable I/O error has occurred on a RAID volume due to a disk failure that caused
the data on the disk to become unavailable. For the RAID volume, the subdisk becomes unavailable
and is considered stale and detached.What is the RAID level in the volume in this situation?
A. 0
B. 2
C. 4
D. 5
Answer: D
Symantec認証試験 ST0-237認定証 ST0-237
NO.10 When you attempt to start the RAID-5 volume, you are prompted with an error message
"VxVM ERROR V-5-1-1237 Volume r5vol is not startable; some subdisks are unusable and the parity
is stale." You want to remove this error and start the RAID-5 volume.
How will you ensure that you do not encounter this error again?
A. Use a single RAID-5 log plex in RAID-5 volumes.
B. Change the subdisks.
C. Use two or more RAID-5 log plexes in RAID-5 volumes.
D. Reattach the subdisks.
Answer: C
Symantec認定資格 ST0-237認証試験 ST0-237 ST0-237問題集
NO.11 You have a nonredundant concatenated volume named datavol in a disk group named datadg.
The volume has a file system on it. One of the underlying disks of the volume called datadg02 fails
temporarily due to a power failure. You fix the problem of the power failure, and ensure that the
disk is powered back again. You ensure that both the system and VxVM can see the disk again. Then,
you reattach the disk back to the disk media record.
Which command will you execute next to be able to run fsck on the file system?
A. vxvol -g datadg start datavol
B. vxrecover -s datavol
C. vxrecover -ns
D. vxvol -g datadg -f start datavol
Answer: D
Symantec ST0-237過去問 ST0-237参考書 ST0-237
NO.12 In System Overview, the status of a detection server is shown as 'unknown'. Examination of
the detection server reveals all Vontu services are running.
Which port is blocked and causing the server to be in the 'unknown' state?
A. 443
B. 8000
C. 8100
D. 8300
Answer: C
Symantec認証試験 ST0-237参考書 ST0-237
NO.13 You need to create a new volume. The new volume will only use disks on controller 1. You
want to execute the vxassist command with the ctlr:c1 storage attribute. You want to ensure that
the command provides desired output.
What should you ensure to meet the required goal?
A. Ensure that storage attribute is a part of the disk group.
B. Ensure that storage attribute is a part of the plex.
C. Ensure that storage attribute is a part of the disk.
D. Ensure that storage attribute is a part of the volume.
Answer: A
Symantec認定試験 ST0-237 ST0-237参考書 ST0-237 ST0-237認定証 ST0-237
NO.14 An information security officer has detected an unauthorized tool on desktops being used to
transmit data with encrypted communications.
Which Symantec Data Loss Prevention feature should the information security officer use to prevent
this tool from accessing confidential data?
A. removable storage monitoring
B. network protocol monitoring
C. application path filtering
D. application monitoring
Answer: D
Symantec認証試験 ST0-237問題集 ST0-237 ST0-237練習問題 ST0-237問題集
NO.15 Which valid automated response option should an administrator choose for Email Prevent?
A. modify the message subject or add specific RFC-2822 headers
B. add metadata to email headers of confidential email
C. modify the body of email messages containing confidential data
D. process confidential email re-routed to a specified email list
Answer: A
Symantec認定資格 ST0-237 ST0-237認証試験 ST0-237問題集
NO.16 Which is a limitation of using CDS disk layout under VxVM 4.0 or above?
A. The CDS format cannot contain a private region and a public region on a single partition.
B. The CDS format cannot be used with hardware RAID controllers.
C. The CDS format cannot be used in conjunction with OS-level partitioning.
D. The CDS format cannot be used for boot disks.
Answer: D
Symantec認証試験 ST0-237 ST0-237認定資格 ST0-237認定証
NO.17 An incident responder is viewing a discover incident snapshot and needs to determine which
information to provide to the next level responder.Which information would be most useful in
assisting the next level responder with data clean-up?
A. Incident Details: Message Body content
B. Custom Attributes: Most Active User from Data Insight
C. Incident Details: File Owner metadata
D. Access Information: File Permissions
Answer: B
Symantec ST0-237 ST0-237参考書
NO.18 A DLP administrator needs to forward data loss incidents to the company's Security
Information and Event Management (SIEM) system.Which response rule action provides the
administrator with the ability to accomplish this task?
A. All: Send Email Notification
B. All: Log to a Syslog Server
C. All: Add Note
D. All: Set Attribute
Answer: B
Symantec ST0-237 ST0-237認定証 ST0-237認定資格
没有评论:
发表评论