IT-Passports.comの専門家チームが彼ら自分の知識と経験を使って多くの人の夢が実現させるIT関連の認証試験の問題集を研究し続けています。IT-Passports.comが提供したHPのHP0-S32試験問題と解答が真実の試験の練習問題と解答は最高の相似性があります。IT-Passports.comがあなたの夢が実現させるサイトでございます。
IT-Passports.comの問題集を購入したら、あなたの試験合格率が100%を保証いたします。もし試験に失敗したら、弊社が全額で返金いたします。
試験番号：HP0-S32問題集
試験科目：HP 「HP BladeSystem Networking 2011」
問題と解答：全136問
Pass4Tesを通じて最新のHPのHP0-S32試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。
IT-Passports.comは受験生の皆様に最も良いかつ便利なサービスを提供できるようにずっと一生懸命頑張っています。現在の時代で高効率は避けられない話題ですから、速いスピードと高効率が我々の目標です。受験の皆さんは速く知識を理解して高い点数を取得できるようにIT-Passports.comは効率的なトレーニング資料をデザインしてさしあげます。皆さんは節約した時間とエネルギーを利用してもっと多くの金銭を稼ぐことができます。
何でも上昇しているこの時代に、自分の制限を突破したくないのですか。給料を倍増させることも不可能ではないです。HPのHP0-S32試験に合格したら、あなたは夢を実現することができます。IT-Passports.comはあなたの最高のトレーニング資料を提供して、１００パーセントの合格率を保証します。これは本当のことです。疑いなくすぐIT-Passports.comのHPのHP0-S32試験トレーニング資料を購入しましょう。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/HP0-S32.html
NO.1 Which industry-standard protocols are supported on Virtual Connect Ethernet uplinks? (Select three.)
A. IEEE 802.1 AX (802.3ad) Link Layer Discovery Protocol (LLDP)
B. IEEE 802.1w-2001 Rapid Spanning Tree (RSTP)
C. IEEE 802.1p Quality of Service (QoS)
D. IEEE 802.1 AX (802.3ad) Link Aggregation Protocol
E. IEEE 802.1Q VLAN tagging
F. IEEE 802.3af-2003 Power over Ethernet (PoE)
Answer: A, D, E
HP問題集 HP0-S32 HP0-S32
NO.2 Which spanning tree protocol is the most appropriate in a VLAN-aware, non-proprietary network
implementation?
A. RSTP
B. PVST+
C. MSTP
D. STP
Answer: C
HP認定試験 HP0-S32過去問 HP0-S32 HP0-S32認定試験 HP0-S32認定証
NO.3 You are configuring Virtual Connect Flex-10 10Gb Ethernet modules with Flex-10 server adapters.
What is an important network design consideration?
A. The Virtual Connect Flex-10 10Gb Ethernet module does not enforce VLAN isolation between
FlexNICs of the same server LAN on Motherboard (LOM).
B. If the Flex-10 server adapters are implemented as mezzanine cards, the Virtual Connect Flex-10 10Gb
Ethernet module requires all FlexNICs be configured for the same speed.
C. The Virtual Connect Manager will enforce physical port isolation by not allowing FlexNICs of the same
server port to connect to the same Virtual Connect network.
D. LACP trunking is not allowed between Virtual Connect uplink ports and infrastructure switch ports
located on different modules, even if within the same physical switch.
Answer: C
HP HP0-S32 HP0-S32 HP0-S32参考書
NO.4 What are Virtual Connect Enterprise Manager features? (Select three.)
A. is licensed per enclosure
B. is licensed with the Virtual Connect Ethernet module
C. is embedded on the Virtual Connect Ethernet module
D. can administer up to 256,000 network addresses
E. can manage a single domain of up to four enclosures
F. can administer up to 16,000 servers
Answer: A, D, F
HP HP0-S32認定証 HP0-S32認定資格 HP0-S32
NO.5 How can a tagged packet be processed for QoS when it is received on an inbound interface? (Select
three.)
A. The marked priority level can be changed to enforce predetermined classification levels.
B. The packet can be scheduled for a queue based on the marked 802.1p priority level.
C. The packet can be moved to a more secure VLAN and its priority remarked.
D. The packet can be scheduled for a queue based on a preset policy.
E. The packet can be discarded or rerouted if it does not match a set policy.
F. The packet can be prevented switch traversal for a predetermined penalty period.
Answer: A, B, D
HP認定資格 HP0-S32 HP0-S32過去問 HP0-S32参考書 HP0-S32問題集
NO.6 What are valid reasons for implementing VLANs? (Select two.)
A. to segregate traffic by resource or application needs
B. to provide enhanced name resolution
C. to reduce subnet cost options
D. to minimize the effect of broadcast traffic on hosts
E. to support multipathing
Answer: A, D
HP問題集 HP0-S32問題集 HP0-S32 HP0-S32
NO.7 What is considered a trunk in a Cisco switching environment?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: B
HP問題集 HP0-S32 HP0-S32問題集 HP0-S32 HP0-S32認定試験 HP0-S32練習問題
NO.8 What are valid FlexNIC bandwidth selections? (Select three.)
A. Preferred
B. Assigned
C. Static
D. Custom
E. Dynamic
F. Auto
Answer: A, D, F
HP HP0-S32 HP0-S32認定資格 HP0-S32 HP0-S32問題集
NO.9 What does N_Port ID virtualization do?
A. provides an abstraction layer between the server HBAs and the SAN
B. provides interoperability among third-party SAN device manufacturers
C. provides connectivity between the Virtual Connect module and the Onboard Administrator
D. enables a single HBA port to register multiple, unique WWNs within a fabric
Answer: D
HP参考書 HP0-S32 HP0-S32参考書 HP0-S32練習問題 HP0-S32
NO.10 In a switching environment with redundant links, which technology is required for proper operation?
A. VLANs
B. Cisco vPC
C. loop prevention
D. dynamic routing
Answer: C
HP HP0-S32認証試験 HP0-S32認定証 HP0-S32 HP0-S32認定試験
NO.11 On a Cisco switch, what does the portfast setting do?
A. eliminates auto-negotiation delays with 10GbE ports
B. ensures the link is at maximum speed regardless of configuration
C. causes BPDUs to be blocked if sensed
D. eliminates delays inherent in RSTP/MSTP synchronization
Answer: D
HP認定証 HP0-S32 HP0-S32認定資格
NO.12 Which is a unique feature of a virtual switch?
A. port mirroring for packet analysis
B. VLAN segmentation at the port level
C. no packet forwarding (routing) between VLANs
D. maximum of 1016 ports per switch
Answer: D
HP参考書 HP0-S32過去問 HP0-S32 HP0-S32 HP0-S32
NO.13 What is used to achieve Fibre Channel data transfer?
A. channel mesh
B. packets
C. tunnels
D. frames
Answer: D
HP過去問 HP0-S32 HP0-S32問題集 HP0-S32
NO.14 What are the requirements for link aggregation using LACP? (Select three.)
A. Links must have the same tagged VLANs assigned.
B. Links must be the same speed.
C. Links must use the same media type.
D. Links must share a boundary.
E. Links must be full-duplex.
F. Links must be fiber connections.
Answer: B, D, E
HP認定証 HP0-S32 HP0-S32認定資格
NO.15 Which tasks are used to define a vNet for Virtual Connect Ethernet? (Select three.)
A. Assign only one network per server NIC.
B. Assign one or multiple networks per server NIC.
C. Optionally set the native VLAN.
D. Define the server profile.
E. Specify VLAN names/IDs.
F. Select unassigned uplinks.
Answer: A, D, F
HP HP0-S32認定試験 HP0-S32認定資格 HP0-S32
NO.16 The IEEE 802.1AX (802.3ad) Link Aggregation Control Protocol is a Layer 2 protocol. What is its
function?
A. dynamically identifies link speeds regardless of media type
B. forms port trunks consisting of two or more uplink ports
C. identifies the VLAN to which frames transmitted on a link or port trunk belong
D. advertises information that describes and identifies devices
Answer: B
HP参考書 HP0-S32 HP0-S32 HP0-S32
NO.17 What is considered a Virtual Connect domain in Virtual Connect Enterprise Manager?
A. a maximum of 1,000 enclosures
B. a maximum of 16,000 servers
C. from 1 to 4 enclosures
D. 250 Virtual Connect Manager domains
Answer: C
HP HP0-S32 HP0-S32 HP0-S32 HP0-S32過去問
NO.18 What does trunk refer to in industry-standard terminology?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: A
HP HP0-S32認定試験 HP0-S32 HP0-S32過去問 HP0-S32
NO.19 Which statements are true about port VLAN memberships? (Select three.)
A. A port can be an untagged member of multiple VLANs.
B. A port must be a member of at least one VLAN.
C. A port must be a tagged member of only one VLAN.
D. A port can be an untagged member of only one VLAN.
E. A port can be a tagged member of multiple VLANs.
F. A port can be a tagged member of one VLAN and an untagged member of multiple VLANs.
Answer: B, D, E
HP HP0-S32 HP0-S32練習問題
NO.20 Which port is the lowest-cost path to the spanning tree root bridge?
A. root port
B. defined root port
C. designated port
D. forwarding port
Answer: A
HP認定証 HP0-S32過去問 HP0-S32
HPのHP0-S32の認定試験に合格すれば、就職機会が多くなります。IT-Passports.comはHPのHP0-S32の認定試験の受験生にとっても適合するサイトで、受験生に試験に関する情報を提供するだけでなく、試験の問題と解答をはっきり解説いたします。
没有评论:
发表评论