IT-Passports.comの問題集を買ったら1年間の無料オンラインのアップデートを提供する一方で、試験に失敗したら、お客様に全額で返金いたします。
話と行動の距離はどのぐらいありますか。これは人の心によることです。意志が強い人にとって、行動は目と鼻の先にあるのです。あなたはきっとこのような人でしょう。IBMの000-015認定試験に申し込んだ以上、試験に合格しなければならないです。これもあなたの意志が強いことを表示する方法です。IT-Passports.comが提供したトレーニング資料はインターネットで最高のものです。IBMの000-015認定試験に合格したいのなら、IT-Passports.comのIBMの000-015試験トレーニング資料を利用してください。
IT業種が新しい業種で、経済発展を促進するチェーンですから、極めて重要な存在ということを我々は良く知っています。IT認証はIT業種での競争な手段の一つです。認証に受かったらあなたは各方面でよく向上させます。でも、受かることが難しいですから、トレーニングツールを利用するのを勧めます。トレーニング資料を選びたいのなら、IT-Passports.comのIBMの000-015試験トレーニング資料は最高の選択です。この資料の成功率が１００パーセントに達して、あなたが試験に合格することを保証します。
いま000-015認定試験の過去問問題集や参考書を必要とするでしょう。仕事に忙しいですから、試験の準備をする時間が足りないでしょう。ですから、効率が良い試験000-015参考書が必要です。もちろん、よりよく試験の準備をするように、自分に相応しいツールを選択するのは一番大事なことです。これは試験に合格できるかどうかに関連する大切な問題です。ですから、IT-Passports.comの000-015問題集を選択してください。
試験番号：000-015問題集
試験科目：IBM 「IBM Maximo Asset Management V7.1 Implementation」
問題と解答：全148問
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/000-015.html
NO.1 Which statement is correct?
A.When creating an Asset, it can be added directly to any storeroom by specifying a Location and rotating
item. The balance in the storeroom is incremented by one.
B.To add a rotating Asset to a storeroom, use the Inventory application and then use the Inventory
Adjustments - Current Balance action to increment the balance by one.
C.When creating an Asset, it can be added directly to a specific site's storeroom by specifying a Location
and rotating item. The balance in the storeroom is incremented by one.
D.When creating an Asset that will be initially held in a storeroom, the user creates the Asset then goes to
the Storeroom application in order to book it into a specific storeroom so that the balance is incremented
by one.
Answer: C
IBM 000-015 000-015認定資格 000-015認定試験
NO.2 Where are Ticket Templates used?
A.Work Requests
B.Service Requests
C.Desktop Requisitions
D.Work Order Tracking
Answer: B
IBM認定資格 000-015 000-015 000-015認証試験 000-015認定資格
NO.3 Which statement is true about the Users and Custodians functionality?
A.Users and Custodians can be created for Assets. A User is someone who uses the Asset. A Custodian
is someone responsible for the care of the Asset. For each person entered, the User field, the Custodian
field or both must be checked. One person can be nominated as the Primary Contact for the Asset.
B.Users and Custodians can be created for Assets and Locations. A User is someone who uses the Asset
or Location. A Custodian is someone responsible for the care of the Asset or Location. For each person
entered, either the User field or the Custodian field or both fields must be checked. One person can be
nominated as the Primary Contact for the Asset or Location.
C.User and Custodians can be created for Assets, Locations and Configuration Items (CIs). The dialog
box has a table window for creating Users and Custodians and another for creating Primary Contacts who
are used for communicating information about the Asset, Location or CI by email or bulletin board. A
person can be a user or a custodian, or both a user and a custodian.
D.Users and Custodians can be created for Assets and Locations. A User is someone who uses the
Asset. A Custodian is someone responsible for the care of the Asset. The Primary Contact is used for
communicating information about the Asset or Location by email or bulletin board. These three fields act
like a radio button, only one of them can be checked on each person record.
Answer: B
IBM 000-015 000-015 000-015
NO.4 Which field(s) are hidden on the Asset application and may need the Application Designer in order to
display them?
A.Priority
B.Failure Class
C.Calendar and Shift Number
D.GL Account, Warranty Expiry Date
Answer: D
IBM 000-015 000-015認定資格 000-015 000-015練習問題
NO.5 Which statement is correct?
A.A condition code can be used on any rotating Asset.
B.A condition code can be added to any type of Asset.
C.A condition code can only be used on a rotating Asset when the item is condition enabled.
D.There is no condition code on an Asset. Condition codes are only associated with items that are
purchased or held in a storeroom.
Answer: C
IBM 000-015練習問題 000-015認定資格 000-015問題集
NO.6 Which applications record the history of attribute changes made on the Specifications tab, without
having to use e-Audit as defined in Database Configuration?
A.Asset, Configuration Item
B.Job Plan, Ticket Template
C.Item Master, Service Item, Tool, Job Plan
D.Asset, Location, Item Master, Service Item, Tool
Answer: A
IBM 000-015 000-015認定資格 000-015練習問題
NO.7 Which record type(s) can belong to a Collection?
A.Users
B.Asset, Location, Item
C.Asset, Location, Configuration Item
D.Asset, Actual Configuration Item, Deployed Asset, Configuration Item
Answer: C
IBM 000-015認定証 000-015認定資格
NO.8 Which statement is true about a characteristic meter in the Condition Monitoring application?
A.Multiple action values can be entered that belong to an ALN domain. When an action value is recorded,
a Job Plan or a PM is used to generate a Work Order.
B.Multiple action values can be entered that belong to either an ALN or a Numeric domain. When an
action value is recorded, a PM is used to generate a Work Order.
C.An upper limit and a lower limit can be entered. When the last measurement is outside of these limits, a
Preventive Maintenance (PM) can be used to generate a Work Order.
D.When an action value is recorded, a Work Order can be generated using the specified Job Plan. Only
one of the values in the ALN domain can be used as an action value.
Answer: A
IBM過去問 000-015認証試験 000-015認定試験
NO.9 An attribute is added to a ClassStructure record in the Classifications application.
On which applications will the attribute be copied to existing records that use this classification?
A.Assets, Item, Locations
B.Job Plan, Ticket Template, Item
C.all applications that have a Specifications tab
D.Assets, Item, Job Plan, Preventive Maintenance
Answer: A
IBM問題集 000-015 000-015練習問題
NO.10 From which three applications is it possible to create a Work Order? (Choose three.)
A.Assets
B.Routes
C.Job Plan
D.Work View
E.Configuration Items
F.Condition Monitoring
Answer: AEF
IBM過去問 000-015 000-015認証試験 000-015過去問 000-015
NO.11 The appropriate status to invoke a Preventive Maintenance (PM) alert has been determined to be in the
Organization application.
What is the Select Action menu item where this can be set?
A.PM options
B.Asset options
C.System settings
D.Work Order options
Answer: A
IBM 000-015過去問 000-015 000-015認定試験 000-015
NO.12 What are the three types of meters?
A.Flow, Utility, Rate
B.Condition, Utility, Gauge
C.Continuous, Condition, Rate
D.Continuous, Gauge, Characteristic
Answer: D
IBM認定試験 000-015 000-015 000-015 000-015練習問題 000-015過去問
NO.13 What is a seasonal-based Preventive Maintenance (PM) record?
A.a PM that defines a period when the PM status is made inactive
B.a PM that defines the specific dates in the future upon which Work Order will be generated
C.a PM with a set of defined days of week or periods of time in a year when the PM is considered active
and is eligible for Work Order generation
D.a PM that defines the days of the week when a Work Order can be generated (for example, Saturday -
Sunday when the production line has stopped)
Answer: C
IBM 000-015認定資格 000-015認証試験 000-015過去問
NO.14 Which three statements are true about using the Move/Modify Assets or Swap Assets actions in the
Assets application? (Choose three.)
A.Any Asset can be moved to any site
B.Multiple Assets cannot be moved to another site in one action.
C.An Asset cannot be moved to another site if the Asset number already exists at that site.
D.Multiple Assets can be moved to the same Location or make these Assets a child of another Asset.
E.A hierarchy of Assets can be moved from one Location to another in the same site by selecting just the
top parent Asset.
F.A hierarchy of Assets can be moved into a storeroom by selecting just the top parent Asset, if all Assets
in the hierarchy are rotating.
Answer: DEF
IBM 000-015 000-015認定証 000-015
NO.15 Which three objects have rotating records? (Choose three.)
A.Person
B.Assets
C.Locations
D.Job Plans
E.Item Master
F.Service Items
Answer: BCE
IBM認定証 000-015認定資格 000-015参考書 000-015認証試験 000-015
NO.16 Which statement is true about Asset hierarchies?
A.A hierarchy of Assets can only be created by using the actions: Apply Item Assembly Structure and
Move/Modify Assets.
B.There are numerous ways of creating or modifying an Asset hierarchy including planning and then
executing a group of Asset moves from the Ticket-based applications.
C.When creating an Asset, it can be assigned a parent Asset. After the record is saved, the hierarchy can
be created from the Spare Parts tab or the action Move/Modify Assets.
D.Asset hierarchies can only be formed for rotating Assets. The most popular methods of creating the
hierarchy are to use the action Apply Item Assembly Structure and Move/Modify Assets in the Asset
application and Move/Swap/Modify in the Work Order Tracking application.
Answer: C
IBM 000-015 000-015 000-015 000-015
NO.17 What is a Failure Code hierarchy?
A.Problem, Cause, Remedy hierarchy based on a Work Classification
B.Problem, Cause, Remedy hierarchy based on an Asset Classification
C.Problem, Cause, Remedy hierarchy based on a Failure Classification
D.Problem, Cause, Remedy hierarchy based on a Location Classification
Answer: C
IBM過去問 000-015 000-015認定資格 000-015練習問題 000-015 000-015
NO.18 Which statement is correct?
A.Any type of Ticket or Work Order can be created from the Asset, Location and Configuration Item (CI)
applications.
B.A Service Request, Incident, Problem, Work Order, Change or Release in the Assets, Locations and CI
applications can be created.
C.A Service Request or Work Order can be created from the Assets and Locations applications. A Ticket
or Work Order cannot be created from the CI application.
D.Any type of Ticket or Work Order can be created from the Assets and Locations applications, but you
can not create an activity or task. A Ticket or Work Order cannot be created from the CI application.
Answer: B
IBM 000-015 000-015
NO.19 When creating a purchase contract, what is the purpose of checking the Change Price on Use field?
A.It specifies that the price in the purchase order (PO) is only an estimated price.
B.It specifies that when a PO is issued against this contract, the price must be changed.
C.It specifies that the price of a given related item can be changed on related POs or purchase requests.
D.It specifies that the price of a given item specified in the Master Contract is reduced or increased, based
on market conditions.
Answer: C
IBM 000-015認定試験 000-015 000-015
NO.20 Where can a Meter Group be referenced?
A.Asset, Location, Rotating Item
B.Asset, Item Master, Service Item, Tools
C.Asset, Location, Preventive Maintenance
D.Asset, Preventive Maintenance, Condition Monitoring
Answer: A
IBM認定資格 000-015過去問 000-015問題集 000-015
NO.21 Click the Exhibit button.
The diagram in the exhibit shows a dialog box that opens when the Select Value option is selected from
the Asset or Location field on a Service Request. The Filter By field has three options User/Custodian,
Public and All.
In which application can the default for this field be changed?
A.Organizations
B.Service Requests
C.Application Designer
D.Database Configuration
Answer: D
IBM 000-015認定資格 000-015認定証 000-015認定証 000-015
NO.22 What is the purpose of a Condition Rate?
A.to create alternate paths in Workflows
B.to assign relative values to inventory items
C.to assign values to personnel for labor purposes
D.to indicate the costs associated with inventory items
Answer: B
IBM 000-015認証試験 000-015 000-015認定試験
NO.23 Which statement about Condition Monitoring is the most accurate?
A.Multiple monitoring points can be created against the same Asset or Location. Before creating these
points, a meter of type Gauge or Characteristic must be defined.
B.Multiple monitoring points can be created against the same Asset. The meter type of these points will
be Gauge. A meter does not need to be created as this is created automatically.
C.Multiple monitoring points can be created against the same Asset. The Asset's current location is
provided as a reference. The point type needs to be specified as Gauge or Characteristic before entering
other details.
D.Multiple monitoring points can be created against the same Asset or Location. As each point is created,
a Gauge type meter for the measurements to be recorded against needs to be created. Characteristic
meters are not set up in Condition Monitoring, but on the Job Plan.
Answer: A
IBM認定資格 000-015 000-015
NO.24 What are the three main differences between the functions of the Move/Modify Assets and Swap
Assets actions in the Assets application and the Move/Swap/Modify action in the Work Order Tracking
application? (Choose three.)
A.Future Asset moves can be planned in the Move/Swap/Modify action.
B.Downtime can be applied to multiple Assets in the Move/Modify Assets action.
C.Meter readings for Assets and Locations can be entered in the Move/Swap/Modify action.
D.The specification records of a Location or a Configuration Item can be modified in the
Move/Swap/Modify action.
E.Future changes to the user and custodian records of Assets and Locations can be planned in the
Move/Swap/Modify action.
F.Modifications can be made to the fields, priority, failure class, calendar and shift and changes can be
applied to multiple Assets in the Move/Modify Assets action.
Answer: ADE
IBM 000-015練習問題 000-015練習問題 000-015
NO.25 Which statement is correct?
A.The classification of a rotating Asset is determined from the classification belonging to its rotating item.
The value of an Asset specification record is always updateable.
B.The classification of a rotating Asset is determined from the classification belonging to its rotating item.
The value of an Asset specification record is determined from the corresponding attribute's value on the
item specification.
C.The classification of a rotating Asset can be entered by the user and the Asset specification is derived
from the classification you enter. The value of an attribute can be entered by the user. There is no
relationship with the item specification.
D.The classification of a rotating Asset is enterable only if its rotating item has no classification of its own.
When the classification has been entered by the user on the Asset, the attribute values are updateable.
Otherwise, they are read-only and are determined from the corresponding attribute's value on the item
specification.
Answer: B
IBM認証試験 000-015 000-015 000-015認定資格
NO.26 Which item type(s) can be used as a rotating item on both an Asset and a Location?
A.Item only
B.Item and Tool only
C.Item, Service Item, Tool
D.Item and Service Item only
Answer: B
IBM 000-015 000-015 000-015認証試験
NO.27 Which Asset fields must have data for the record to be saved to the database?
A.Site, Location, Type
B.Site, Status, Location
C.Site, Status, Asset Up?
D.Status, Location, Failure Class
Answer: C
IBM 000-015 000-015 000-015
NO.28 When can Material Receipts be changed if inspection is not required?
A.prior to saving the Receipt Line
B.prior to inspecting the Receipt Line
C.prior to approving the Receipt Line
D.prior to completing the Receipt Line
Answer: A
IBM 000-015問題集 000-015参考書 000-015参考書
NO.29 Which statement about an Asset hierarchy is correct?
A.Once created, additional children can always be added to the hierarchy from the Spare Parts tab when
the parent Asset is the current record.
B.Once created, additional children can always be added to the hierarchy as long as the parent is a
rotating Asset, it is not decommissioned, and it is not in a storeroom.
C.An Asset hierarchy can be created from rotating and non-rotating Assets and can be set so that the
hierarchy can not be modified from the Spare Parts tab in the Asset application.
D.An Asset hierarchy can only be created from rotating Assets using the action Apply Item Assembly
Structure. The hierarchy can be locked so that it cannot be modified from the Spare Parts tab in the Asset
application.
Answer: C
IBM 000-015認定資格 000-015 000-015練習問題 000-015
今の多くのIT者が参加している試験に、IBMの000-015認定試験がとても人気がある一つとして、合格するために豊富な知識と経験が必要です。IBMの000-015認定試験に準備する練習ツールや訓練機関に通学しなればまりませんでしょう。IT-Passports.comは君のもっともよい選択ですよ。多くIT者になりたい方にIBMの000-015認定試験に関する問題集を準備しております。君に短い時間に大量のITの専門知識を補充させています。
没有评论:
发表评论