Microsoftの070-690認定試験の問題集

IT-Passports.comが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。

IT-Passports.comは正確な選択を与えて、君の悩みを減らして、もし早くてMicrosoft 070-690認証をとりたければ、早くてIT-Passports.comをショッピングカートに入れましょう。あなたにとても良い指導を確保できて、試験に合格するのを助けって、IT-Passports.comからすぐにあなたの通行証をとります。

IT-Passports.comは専門的なIT認証サイトで、成功率が１００パーセントです。これは多くの受験生に証明されたことです。IT-Passports.comにはIT専門家が組み立てられた団体があります。彼らは受験生の皆さんの重要な利益が保障できるように専門的な知識と豊富な経験を活かして特別に適用性が強いトレーニング資料を研究します。その資料が即ちMicrosoftの070-690試験トレーニング資料で、問題集と解答に含まれていますから。

試験番号：070-690問題集
試験科目：Microsoft 「TS: Windows HPC Server 2008, Configuring and Managing (English)」
問題と解答：全95問

この人材が多い社会で、人々はずっと自分の能力を高めていますが、世界で最先端のIT専門家に対する需要が継続的に拡大しています。ですから、Microsoftの070-690認定試験に受かりたい人が多くなります。しかし、試験に受かるのは容易なことではないです。実は良いトレーニング資料を選んだら試験に合格することは不可能ではないです。IT-Passports.comが提供したMicrosoftの070-690試験トレーニング資料はあなたが試験に合格することを助けられます。IT-Passports.comのトレーニング資料は大勢な受験生に証明されたもので、国際的に他のサイトをずっと先んじています。Microsoftの070-690認定試験に合格したいのなら、IT-Passports.comが提供したMicrosoftの070-690トレーニング資料をショッピングカートに入れましょう。

当面の実際のテストを一致させるために、IT-Passports.comのMicrosoftの070-690問題集の技術者はずべての変化によって常に問題と解答をアップデートしています。それに我々はいつもユーザーからのフィードバックを受け付け、アドバイスの一部をフルに活用していますから、完璧なIT-Passports.comのMicrosoftの070-690問題集を取得しました。IT-Passports.comはそれを通じていつまでも最高の品質を持っています。

IT-Passports.comの経験豊富な専門家チームはMicrosoftの070-690認定試験に向かって専門性の問題集を作って、とても受験生に合っています。IT-Passports.comの商品はIT業界中で高品質で低価格で君の試験のために専門に研究したものでございます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/070-690.html

NO.1 You administer a Windows HPC Server 2008 cluster that has 150 nodes. Users report that cluster jobs
take longer than normal to complete. You need to calculate the network latency between the nodes. What
should you do?
A. Run a serial ring test across all nodes by using the mpipingpong.exe utility.
B. Run the ping command on all broker nodes by using the clusrun.exe utility.
C. Run the etl2otf command on all nodes by using the mpiexec.exe utility.
D. Run the etl2clog command on all broker nodes by using the mpiexec.exe utility.
Answer: A

Microsoft   070-690   070-690問題集   070-690認定資格

NO.2 You are deploying a Windows HPC Server 2008 cluster for your company. The cluster head node is
configured with a network topology that has compute nodes isolated on a private network. You want to
add new servers as compute nodes to the cluster. You open the HPC Management Console, start the Add
Node Wizard, and select an option to add compute nodes from an operating system image. You start the
new servers and discover that the wizard is unable to display any of the new servers on the Select New
Nodes page. You need to ensure that the new servers are displayed on the Select New Nodes page of the
wizard. What should you do?
A. Configure the network switches to support the cut-through switching method.
B. Configure Windows Deployment Services on the head node to respond to all preboot execution
environment (PXE) requests.
C. Configure the compute node servers for preboot execution environment (PXE) boot from the NIC that
is connected to the private network.
D. Prestage computer accounts for the new servers in Active Directory Domain Services.
Answer: C

Microsoft   070-690   070-690問題集   070-690認定証   070-690

NO.3 You are a system administrator for your company. Your company deploys a new Windows HPC Server
2008 cluster. The company requires a record of performance information over time. The record must
include link latency and throughput statistics. You need to periodically execute a command that collects
the required information. Which command should you run?
A. ping.exe
B. nltest.exe
C. mpipingpong.exe
D. Get-HPCMetric.ps1
Answer: C

Microsoft   070-690   070-690認定資格   070-690過去問   070-690

NO.4 You administer a Windows HPC Server 2008 cluster. You have recently deployed 10 new nodes to the
cluster. Users report that only seven of the new nodes function as part of the cluster. You discover that
three new nodes are in the Unknown state. You need to find out the problem that has prevented the three
nodes from joining the cluster. What should you do?
A. Run the Connectivity diagnostics tool and view the results of the DNS Name Resolution test.
B. Run the Connectivity diagnostics tool and view the results of the Internode Connectivity test.
C. Run the System Configuration diagnostics tool and view the results of the Required Software Updates
test.
D. Run the System Configuration diagnostics tool and view the results of the Application Configuration
test.
Answer: C

Microsoft認定資格   070-690参考書   070-690   070-690   070-690   070-690認定資格

NO.5 You administer a Windows HPC Server 2008 cluster for your company. You plan to add new nodes to
the cluster by using bare metal provisioning capabilities. You need to ensure the new nodes adhere to
your company naming standards. What should you do?
A. Add a naming series to the head node.
B. Modify the NodeConfigurationFile.xsd file.
C. Modify the NodeInfo.xml file to contain an appropriate name for each node.
D. Create a new node template that contains an appropriate name for each node.
Answer: A

Microsoft問題集   070-690問題集   070-690   070-690

NO.6 You administer a Windows HPC Server 2008 cluster that has 120 compute nodes. The cluster requires
10 additional compute nodes. You manually install Windows Server 2008 Enterprise Edition on 10 new
servers and connect them to the cluster networks. You open HPC Management Console, start the Add
Node Wizard, and select an option to add preconfigured compute nodes. You discover that the wizard is
unable to list any of the new servers. You need to ensure that all the new servers are available for the
wizard. What should you do before you restart the wizard?
A. Install HPC Pack 2008 on the new servers and specify the name of the head node.
B. Create a node template that does not include a step to deploy an operating system image.
C. Configure Windows Deployment Services to respond to all preboot execution environment (PXE)
requests.
D. Move the computer accounts for the new servers in the same organizational unit (OU) that contains the
computer account of the head node.
Answer: A

Microsoft認定資格   070-690認定試験   070-690   070-690問題集   070-690

NO.7 You administer a Windows HPC Server 2008 cluster. You plan to deploy new nodes to the cluster by
using an existing node template. A folder and its files are stored on the head node. You need to ensure
that the folder and its files are copied to each node by using the Server Message Block (SMB) protocol.
Which task should you add to the node template?
A. Unicast Copy
B. Multicast Copy
C. Mount Share
D. Apply WIM Image
Answer: A

Microsoft   070-690   070-690   070-690認定証

NO.8 You administer a Windows HPC Server 2008 cluster for your company. You plan to configure a new
node template to deploy the evaluation edition of Windows Server 2008 HPC Edition. You need to ensure
that the deployment of nodes that use the template is successful. What should you do?
A. Add a Tag element to the node XML file. Set the value of the attribute of the Tag element to Evaluation.
B. Add a Template element to the node XML file. Set the value of the Name attribute to Evaluation.
C. Add a Template element to the node XML file. Set the value of the Provisioned attribute to False.
D. Add a Template element to the node XML file. Set the value of the ProductKey attribute to a valid
Windows Server HPC Edition product key.
Answer: D

Microsoft   070-690認定証   070-690認定試験   070-690認定試験

NO.9 You administer a Windows HPC Server 2008 cluster. All jobs submitted to the cluster fail. You discover
that the nodes communicate successfully. You need to ensure that the jobs can be submitted successfully.
What should you do first.?
A. Start the HPC Basic Profile Web Service on all nodes.
B. Start the HPC Cluster Manager and enable job Backfilling.
C. Start the HPC Cluster Manager and run the MPI Lightweight throughput test.
D. Start the HPC Cluster Manager and run the job submission diagnostics tool on all nodes.
Answer: D

Microsoft   070-690過去問   070-690   070-690   070-690参考書   070-690過去問

NO.10 You are a system administrator for your company. Your company has deployed a Windows HPC Server
2008 cluster. The HPC nodes are deployed by using a node template that is configured to deploy
Windows HPC Pack on each node. You need to modify the node template so that HPC PowerShell and
the HPC Cluster Manager are installed on the new nodes. What should you do?
A. Install HPC PowerShell and the HPC Cluster Manager on the HPC head node.Recreate the node
template by using the same settings.
B. Add a Run OS Command task to the node template after the Install HPC Pack task.Configure the Run
OS Command task to install the utilities.
C. Add a Unicast Copy task to the node template before the Install HPC Pack task.Configure the Unicast
Copy task to copy HPC PowerShell and the HPC Cluster Manager.
D. Add a Unicast Copy task to the node template to copy the utilities.Add a Run OS Command task to the
node template to install the utilities.Delete the original Install HPC Pack task.
Answer: D

Microsoft認定証   070-690過去問   070-690   070-690

進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くIT-Passports.comのMicrosoftの070-690試験トレーニング資料を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、１００パーセントの合格率を保証できますから、躊躇わずに購入しましょう。