EMCのE20-326認証試験はIT業界にとても重要な地位があることがみんなが、たやすくその証本をとることはではありません。いまの市場にとてもよい問題集が探すことは難しいです。IT-Passports.comは認定で優秀なIT資料のウエブサイトで、ここでEMC E20-326認定試験の先輩の経験と暦年の試験の材料を見つけることができるとともに部分の最新の試験の題目と詳しい回答を無料にダウンロードこともできますよ。
E20-326認定試験はたいへん難しい試験ですね。しかし、難しい試験といっても、試験を申し込んで受験する人が多くいます。なぜかと言うと、もちろんE20-326認定試験がとても大切な試験ですから。IT職員の皆さんにとって、この試験のE20-326認証資格を持っていないならちょっと大変ですね。この認証資格はあなたの仕事にたくさんのメリットを与えられ、あなたの昇進にも助けになることができます。とにかく、これは皆さんのキャリアに大きな影響をもたらせる試験です。こんなに重要な試験ですから、あなたも受験したいでしょう。
IT-Passports.comのIT認証試験問題集は長年のトレーニング経験を持っています。IT-Passports.com EMCのE20-326試験トレーニング資料は信頼できる製品です。当社のスタッフ は受験生の皆様が試験で高い点数を取ることを保証できるように、巨大な努力をして皆様に最新版のE20-326試験トレーニング資料を提供しています。IT-Passports.com EMCのE20-326試験材料は最も実用的なIT認定材料を提供することを確認することができます。
IT-Passports.comのE20-326問題集の超低い価格に反して、 IT-Passports.comに提供される問題集は最高の品質を持っています。そして、もっと重要なのは、IT-Passports.comは質の高いサービスを提供します。望ましい問題集を支払うと、あなたはすぐにそれを得ることができます。IT-Passports.comのサイトはあなたが最も必要なもの、しかもあなたに最適な試験参考書を持っています。E20-326問題集を購入してから、また一年間の無料更新サービスを得ることもできます。一年以内に、あなたが持っている資料を更新したい限り、IT-Passports.comは最新バージョンのE20-326問題集を捧げます。IT-Passports.comはあなたに最大の利便性を与えるために全力を尽くしています。
IT-Passports.comが提供したEMCのE20-326トレーニング資料はシミュレーションの度合いがとても高いでから、実際の試験で資料での同じ問題に会うことができます。これは当社のITエリートの団体はすごい能力を持っていることが説明されました。現在、野心家としてのIT職員がたくさんいて、自分の構成ファイルは市場の需要と互換性があることを確保するために、人気があるIT認証試験を通じて自分の夢を実現します。そのようなものとして、EMCのE20-326試験はとても人気がある認定試験です。IT-Passports.comが提供したEMCのE20-326トレーニング資料を手にすると、夢への扉はあなたのために開きます。
EMC E20-326認証試験を通るために、いいツールが必要です。EMC E20-326認証試験について研究の資料がもっとも大部分になって、IT-Passports.comは早くてEMC E20-326認証試験の資料を集めることができます。弊社の専門家は経験が豊富で、研究した問題集がもっとも真題と近づいて現場試験のうろたえることを避けます。
試験番号：E20-326問題集
試験科目：EMC 「Symmetrix Solutions Design Exam」
問題と解答：全132問
EMCのE20-326の認定試験の受験生は試験に合格することが難しいというのをよく知っています。しかし、試験に合格することが成功への唯一の道ですから、試験を受けることを選ばなければなりません。職業価値を高めるために、あなたは認定試験に合格する必要があります。IT-Passports.comが開発された試験の問題と解答は異なるターゲットに含まれていますし、カバー率が高いですから、それを超える書籍や資料が絶対ありません。大勢の人たちの利用結果によると、IT-Passports.comの合格率は１００パーセントに達したのですから、絶対あなたが試験を受かることに重要な助けになれます。IT-Passports.comは唯一のあなたの向いている試験に合格する方法で、IT-Passports.comを選んだら、美しい未来を選んだということになります。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/E20-326.html
NO.1 You are designing a new VMAX array. The customer requires high performance for their random
write-intensive application. Which RAID protection should you recommend?
A. RAID-5
B. RAID-6
C. RAID-1
D. RAID-S
Answer: C
EMC E20-326 E20-326認定試験 E20-326 E20-326
NO.2 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a static partition reaches the write pending limit set for that
partition?
A. Cache will be borrowed from a flexible partition
B. Cache will be borrowed from the default partition
C. Host write activity to that partition will be throttled
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: C
EMC E20-326 E20-326 E20-326 E20-326
NO.3 A customer is interested in utilizing TimeFinder/Snap to generate a backup copy of an application
every six hours. In order for you to calculate the SAVE Pool requirements you will need to run Change
Tracker. To which value should you set the reset interval length for DeltaMark?
A. 21600
B. 10800
C. 86400
D. 32400
Answer: A
EMC E20-326 E20-326認定証 E20-326
NO.4 Prior to starting an implementation, which tool should be used to automate the data collection on a UNIX
host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: A
EMC E20-326認証試験 E20-326 E20-326認定証
NO.5 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a flexible partition reaches the write pending limit set for that
partition?
A. Host write activity to that partition will be throttled
B. Cache will be borrowed from the other flexible partition
C. Cache will be borrowed from the default partition
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: A
EMC認定試験 E20-326 E20-326参考書 E20-326
NO.6 Prior to starting an implementation, which tool should be used to automate the data collection on a
Windows host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: B
EMC練習問題 E20-326 E20-326 E20-326認定試験
NO.7 A customer will migrate existing AIX, HP-UX and Windows hosts from a DMX-3 to a new VMAX array.
You need performance data from the existing array to design to the new VMAX volumes configuration
layout. Which tools can be used to collect Symmetrix array performance data?
A. ControlCenter Performance Manager and STP Collector
B. EMC Workload Generator and STP Navigator
C. Storage Configuration Advisor and STP Collector
D. ControlCenter Performance Manager and SymmMerge
Answer: A
EMC E20-326 E20-326過去問 E20-326 E20-326
NO.8 You are designing a new VMAX array. The customer's primary concern is maximizing capacity
available to the host. What RAID protection should you recommend?
A. RAID-5 (7+1)
B. RAID-6 (6+2)
C. RAID-1/0
D. RAID-5 (3+1)
Answer: A
EMC E20-326 E20-326 E20-326 E20-326過去問
NO.9 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports their environment can tolerate five minutes or less of data recovery
following a disaster but have not yet determined the maximum allowable downtime for their applications.
The customer asks which remote replication methods you recommend for their environment.
What do you recommend?
A. Defer making a recommendation until the application RTO is known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RPO in known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A
EMC E20-326 E20-326認証試験 E20-326
NO.10 A TimeFinder/Snap of production data must be recreated in a two hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every two hours
B. SUM report over two hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A
EMC認定証 E20-326参考書 E20-326認証試験
NO.11 A TimeFinder/Snap of production data must be recreated in a four hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every four hours
B. SUM report over four hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A
EMC E20-326参考書 E20-326 E20-326過去問
NO.12 You are proposing a new VMAX array with FAST VP. The customer reports their application needs a
small amount of EFD capacity and asks whether 200 GB EFDs or 400 GB EFDs would provide better
overall performance. Which drive size do you recommend and why?
A. 400 GB EFDs. They support higher IOPS than 200 GB EFDs.
B. 200 GB EFDs. They support higher I/O density than 400 GB EFDs.
C. 400 GB EFDs. They support higher I/O density than 200 GB EFDs.
D. 200 GB EFDs. They support higher IOPS than 400 GB EFDs.
Answer: B
EMC E20-326認定資格 E20-326 E20-326 E20-326
NO.13 What is a best practice when configuring a Symmetrix VMAX for optimal performance and cost?
A. Different drive types are mixed and spread throughout the array.
B. Dedicated engines have appropriate drive types to meet application needs.
C. A dedicated array with Enterprise Flash Drives (EFD).
D. A dedicated array based upon application requirement.
Answer: A
EMC認定試験 E20-326 E20-326 E20-326
NO.14 A Symmetrix VMAX has been configured with Dynamic Cache Partitions.
What is a criterion that must be met for a cache slot to be eligible for donation?
A. The fall through time must be greater than the donation age
B. The fall through time must be less than the donation age
C. The cache slot must belong to a static partition
D. There must be available cache slots in the default partition
Answer: A
EMC練習問題 E20-326 E20-326 E20-326 E20-326過去問
NO.15 A customer plans to migrate existing AIX, HP-UX and IBM iSeries hosts to a new VMAX array.
Performance data is needed to design the VMAX volumes configuration layout.
What host performance data do you request from the customer?
A. IOSTAT, SAR, WRKDSKSTS
B. STP, Perfmon, SMF/CMF
C. IOSTAT, STP, WRKDSKSTS
D. Perfmon, SAR, SMF/CMF
Answer: A
EMC認証試験 E20-326認証試験 E20-326 E20-326認定資格
NO.16 A customer plans to migrate existing AIX and Windows hosts as well as Mainframe z/OS LPARs to a
new VMAX array. Performance data is needed to design the VMAX volumes configuration layout. Which
host performance data do you request from the customer?
A. STP, SAR, WRKDSKSTS
B. SAR, Perfmon, WRKDSKSTS
C. IOSTAT, Perfmon, SMF/CMF
D. IOSTAT, SAR, SMF/CMF
Answer: C
EMC E20-326 E20-326 E20-326 E20-326 E20-326認証試験
NO.17 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the HP-UX Servers,
to list the software modules installed?
A. swlist
B. lslpp
C. pkginfo
D. pkgchk
Answer: A
EMC参考書 E20-326認証試験 E20-326 E20-326参考書 E20-326練習問題
NO.18 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the AIX Servers, to
list the software modules installed?
A. pkginfo
B. lslpp
C. swlist
D. cfgmgr
Answer: B
EMC E20-326認定資格 E20-326 E20-326認証試験
NO.19 A customer is interested in utilizing SRDF/AR to generate a remote copy of an application with an RPO
of six hours. In order for you to calculate the bandwidth requirements you will need to run Change Tracker.
To which should you set the reset interval length for DeltaMark?
A. 21600
B. 86400
C. 32400
D. 10800
Answer: D
EMC過去問 E20-326問題集 E20-326認定証 E20-326 E20-326 E20-326
NO.20 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports the maximum allowable downtime for their applications is ninety minutes,
but they have not yet determined how much data recovery following a disaster their environment can
tolerate.
The customer asks which remote replication method you recommend for their environment.
What do you recommend.?
A. Defer making a recommendation until the application RPO in known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RTO is known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A
EMC E20-326認定証 E20-326 E20-326
IT-Passports.comは客様の要求を満たせていい評判をうけいたします。たくさんのひとは弊社の商品を使って、試験に順調に合格しました。
没有评论:
发表评论