IT-Passports.comは正確な選択を与えて、君の悩みを減らして、もし早くてIBM 000-541認証をとりたければ、早くてIT-Passports.comをショッピングカートに入れましょう。あなたにとても良い指導を確保できて、試験に合格するのを助けって、IT-Passports.comからすぐにあなたの通行証をとります。
000-541認定試験の資格を取得するのは容易ではないことは、すべてのIT職員がよくわかっています。しかし、000-541認定試験を受けて資格を得ることは自分の技能を高めてよりよく自分の価値を証明する良い方法ですから、選択しなければならならないです。ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。もちろんありますよ。IT-Passports.comの問題集を利用することは正にその最良の方法です。IT-Passports.comはあなたが必要とするすべての000-541参考資料を持っていますから、きっとあなたのニーズを満たすことができます。IT-Passports.comのウェブサイトに行ってもっとたくさんの情報をブラウズして、あなたがほしい試験000-541参考書を見つけてください。
IT-Passports.comというサイトは世界的に知名度が高いです。それはIT-Passports.comが提供したIT業種のトレーニング資料の適用性が強いですから。それはIT-Passports.comのIT専門家が長い時間で研究した成果です。彼らは自分の知識と経験を活かして、絶え間なく発展しているIT業種の状況によってIT-Passports.comのIBMの000-541トレーニング資料を作成したのです。多くの受験生が利用してからとても良い結果を反映しました。もしあなたはIT認証試験に準備している一人でしたら、IT-Passports.comのIBMの000-541トレーニング資料を選らんだほうがいいです。利用しないのならメリットが分からないですから、速く使ってみてください。
IT-Passports.comのIBMの000-541トレーニング資料を利用したら、初めて試験を受けるあなたでも一回で試験に合格できることを保証します。IT-Passports.comのIBMの000-541トレーニング資料を利用しても合格しないのなら、我々は全額で返金することができます。あなたに他の同じ値段の製品を無料に送って差し上げます。
試験番号：000-541問題集
試験科目：IBM 「DB2 9.7 DBA for Linux UNIX and Windows」
問題と解答：全104問
いま000-541認定試験の過去問問題集や参考書を必要とするでしょう。仕事に忙しいですから、試験の準備をする時間が足りないでしょう。ですから、効率が良い試験000-541参考書が必要です。もちろん、よりよく試験の準備をするように、自分に相応しいツールを選択するのは一番大事なことです。これは試験に合格できるかどうかに関連する大切な問題です。ですから、IT-Passports.comの000-541問題集を選択してください。
IT-Passports.comのIBMの000-541試験トレーニング資料が受験生の皆様の評判を取ったのはもう最近のことではないです。これはIT-Passports.comのIBMの000-541試験トレーニング資料は確かに信頼できて、受験生の皆様が首尾よく試験に合格することに助けを差し上げられることが証明されました。 IT-Passports.comのIBMの000-541試験トレーニング資料がベストセラーになって、他のサイトをずっと先んじて皆様の認可を取りましたから、好評は言うまでもないです。 IBMの000-541認定試験を受けたら、速くIT-Passports.comというサイトをクリックしてください。あなたがずっとほしいものを手に入れることができますから。最もプロな人々が注目しているIT専門家になりたかったら、後悔しないように速くショッピングカートを入れましょう。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/000-541.html
NO.1 Because of an application abend, a database named PAYROLL needs to be
restored to approximately 9:26 am on June 1, 2009. After the database is
restored from a backup image, the command shown below is executed:
ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002
USING LOCAL TIME AND STOP
When this command is executed, the error shown below is generated:
SQL4970N Roll-forward recovery on database "PAYROLL" cannot reach the
specified stop point (end-of-log or point-in-time) because of missing log
file(s) on node(s) "0".
Which two commands could be used to resolve this error? (Choose two.)
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
B. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP
C. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING LOCAL
TIME AND STOP OVERFLOW LOG PATH /mnt/arclog
D. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP NORETRIEVE MISSING RECORDS
Answer: A C
IBM 000-541練習問題 000-541練習問題 000-541認定資格 000-541認証試験
NO.2 Click the Exhibit button
Given the INSERT statements shown below:
INSERT INTO applicant VALUES (1 , ¯ ¡¯ 5 4
INSERT INTO applicant VALUES (2, 'F ¯, 38 )
INSERT INTO applicant VALUES (3, ® ¡¯, 2 1
INSERT INTO applicant VALUES (4, 'F ¯, 91 )
INSERT INTO applicant VALUES (5, 'C ¯, 50 )
INSERT INTO applicant VALUES (6, 'C ¯, 70 )
INSERT INTO applicant VALUES (7, 'C ¯, 95 )
How many rows will be successfully inserted?
A. 1
B. 3
C. 5
D. 7
Answer: C
IBM問題集 000-541認定証 000-541練習問題 000-541 000-541過去問
NO.3 Given the DDL shown below:
CREATE TABLE tab1 (coll SMALLINT );
CREATE VIEW v1 AS SELECT coll FROMtabl WHERE coll > 25 ;
CREATE VIEW V2 AS SELECT COI1 FROM v1 WITH CASCADED CHECK OPTION
CREATE VIEW v3 AS SELECT coll FROM v2 WHERE coll < 100 ;
Which statement will fail?
A. INSERT INTO v2 VALUES (35)
B. INSERT INTO v1 VALUES (5)
C. INSERT INTO v3 VALUES (25)
D. INSERT INTO v3 VALUES (200)
Answer: C
IBM 000-541過去問 000-541認証試験
NO.4 Which administrative authority is needed to run the audit stored procedures
and table functions such as the AUDIT_DELIM_EXTRACT stored procedure?
A DBADM
B SECADM
C SQLADM
D SYS ADM
Answer: B
IBM過去問 000-541認証試験 000-541
NO.5 How does the DB2 Server identify the list of GSS-API plug-ins it supports?
A. by using the SRVCON_GSSPLUGIN_LIST database manager configuration
parameter
B. by using the SRVCON_GSSPLUGIN_LIST registry variable
C. by using the SRVSUPP_GSSPLUGIN_LIST database manager configuration
parameter
D. by using the SRVSUPP_GSSPLUGIN_LIST registry variable
Answer: A
IBM 000-541 000-541認定証
NO.6 If a non-recoverable database crashes, how can a DBA successfully restart
the database if a table space is damaged and cannot complete crash recovery?
A. The database must be restarted using the RESTART DATABASE command with
the DROP PENDING TABLESPACES option specified. At that point, the database
can be brought on-line and the damaged table space must be dropped and
re-created.
B. The damaged table space must be restored from the latest backup and any
active transaction logs in the log path can then be applied to it using the
TABLESPACE ONLINE option of the ROLLFORWARD DATABASE command. This will bring
the table space on-line and synchronize it with the rest of the database.
C. The damaged table space must be restored from the latest backup image.
Once restored from the backup image, the RESTART DATABASE command can be issued
to apply all the relevant transactions from the active logs. At that point,
the database will come on-line and all table spaces will be synchronized.
D. The damaged table space will require that the entire database be restored
from the latest backup image because the database is non-recoverable and will
not be accessible.
Answer: A
IBM 000-541 000-541 000-541
NO.7 Which two plug-in types does the DB2 database system provide? (Choose two.)
A. Group retrieval
B. Kerberos authentication
C. Server authentication
D. Encryption authentication
Answer: A C
IBM 000-541練習問題 000-541認定資格 000-541認定試験
NO.8 Click the Exhibit button.
Refer to the logging configuration parameters shown in the exhibit.
What will happen if there are currently 100 active log files and DB2 needs
to create log file 101?
A. At least one application will receive a "log full" error and at least one
transaction will be rolled back because the active log space is full.
B. Log file 101 will go into the OVERFLOWLOGPATH directory since the active
log space is full and infinite logging has been enabled.
C. The database will appear to be hung since the active log space is full
and the BLK_LOG_DSK_FUL parameter is set to YES.
D. Log file 101 will be successfully created in the primary log path since
infinite logging has been enabled. Applications will continue processing
normally.
Answer: D
IBM 000-541認定証 000-541認定資格 000-541 000-541
NO.9 A DBA wants to use Label Based Access Control (LBAC) to protect Individual
rows in a table.
Which data type must be used to create a column to hold the necessary LBAC
security data?
A. SYSPR0C.DB2LBACU\BEL
B. SYSPR0C.DB2SECURITYU\BEL
C. SYSIBM .DB2LBACLABEL
D. SYSIBM .DB2SECURITYLABEL
Answer: D
IBM問題集 000-541 000-541過去問 000-541
NO.10 Click the Exhibit button.
In the exhibit, where would the authentication of the supplied userid and
password from a remote client take place?
A. AIX operating system
B. LDAP Server
C. Kerberos Server
D. "MyPlugin.so" GSS-API plug-in
Answer: B
IBM 000-541問題集 000-541問題集 000-541 000-541 000-541認証試験
NO.11 Due to an application error, some data was deleted from a very large table
residing in table space TS1. The table space was then renamed TS2 before the
error was detected. Rather than try and rebuild this table, it was decided
that database DB1 would be restored and then rolled forward to a point-in-time
(PIT) before the delete operation took place. Unfortunately the PiT roll
forward was done to a time that was too early and some critical transactions
were missing when the database was brought back on-line.
Which steps must be taken to ensure that the critical transactions which are
currently missing from the database are correctly applied to the database
and that table space TS1 is renamed TS2?
A 1. Restore database DB1.
2. Roll forward to the correct point-in-time.
3. Rename TS1 to TS2.
B 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to the correct point-in-time.
3. Rename table space TS1 to TS2.
4. Re-run the batch processes.
C 1, Restore database DB1
2. Roll forward to end of logs.
D 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to end of logs.
Answer: A
IBM 000-541 000-541過去問 000-541 000-541
NO.12 Which set of procedures will be required to perform a rolling upgrade
in a HADR environment?
A 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
B 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
C 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the new primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
D 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the standby database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
Answer: D
IBM 000-541 000-541認定資格 000-541
NO.13 Which two can be replicated using HADR? (Choose two.)
A. database configuration changes
B. CREATE TABLE ... NOT LOGGED INITIALLY operations
C. Data Definition Language (DDL) statements
D. LOAD operations
Answer: C D
IBM認証試験 000-541過去問 000-541 000-541認証試験 000-541 000-541
NO.14 BOB and ALICE moved from the DEVELOPER group to the ANALYST group.
As the security administrator, which two commands would remove Bob and Alice
from the DEVELOPER group? (Choose two.)
A. REVOKE ROLE developer FROM bob, alice
B. REVOKE GROUP developer FROM bob, alice
C. REVOKE ROLE developer FROM USER bob, USER alice
D. REVOKE GROUP developer FROM USER bob, USER alice
Answer: A C
IBM認定資格 000-541 000-541練習問題 000-541練習問題
NO.15 What are three authorization categories in DB2? (Choose three.)
A System-level
B Database-level
C Network-level
D Object-level
E Instance-level
Answer: ABD
IBM 000-541参考書 000-541練習問題
NO.16 Which HADR feature minimizes the impact of software maintenance on the
Standby server?
A. Configure all AUTOMATIC features.
B. Configure all AUTOMATIC maintenance parameters.
C. Configure AUTOMATIC maintenance and perform a rolling upgrade
D. Configure AUTOMATIC maintenance and perform a roll forward.
Answer: C
IBM 000-541 000-541 000-541 000-541練習問題 000-541
NO.17 A database administrator takes a full backup of the PRODUCTS database
every Sunday. During the week, two other backups are taken, one on Tuesday
and one on Thursday. The PRODUCTS database is about 800 GB in size, and about
20 percent of the data is modified throughout a week.
Assuming that backup times need to be kept to a minimum, which command should
be used to produce the Tuesday and Thursday backup images?
A. BACKUP DATABASE products TO /mnt/backup
B. BACKUP DATABASE products INCREMENTAL TO /mnt/backup
C. BACKUP DATABASE products TO /mnt/backup UTIL_IMPACT_PRIORITY 10
D. BACKUP DATABASE products INCREMENTAL DELTA TO /mnt/backup
Answer: D
IBM過去問 000-541認定資格 000-541認証試験
NO.18 Which statement is correct about informational constraints?
A. An informational constraint can be used by the SQL compiler to improve
the access to data and query performance.
B. The database manager uses an informational constraint to enforce the
uniqueness of the key during changes to the columns of the unique constraint.
C. An informational constraint is a column or combination of columns that
has the same properties as a unique constraint.
D. An informational constraint specifies that every row that is inserted or
updated in the table must conform to the definition of the table.
Answer: A
IBM過去問 000-541参考書 000-541認証試験 000-541認定資格
NO.19 What are three system and database level authorizations available with
DB2? (Choose three.)
A SYSMON
B SYSMNT
C DBCTRL
D SYS ADM
E DBADM
Answer: A D E
IBM 000-541 000-541 000-541参考書
NO.20 .A database named PAYROLL was backed up on Sunday. On Tuesday, a table space
in the PAYROLL database was renamed from TBSP1 to EMPINFO_TBSP. On Thursday,
the database was restored from the backup image created on Sunday.
Which command must be issued to roll the renamed table space forward to the
current date and time?
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbspl)
B. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
TABLESPACE(empinfo_tbsp)
C. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
TO empinfo_tbsp)
D. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
RENAME empinfo_tbsp)
Answer: B
IBM問題集 000-541認定試験 000-541 000-541 000-541認定資格 000-541
IBMの000-541認定試験に関連する知識を学んで自分のスキルを向上させ、000-541認証資格を通して他人の認可を得たいですか。IBMの認定試験はあなたが自分自身のレベルを高めることができます。000-541認定試験の資格を取ったら、あなたがより良く仕事をすることができます。この試験が非常に困難ですが、実は試験の準備時に一生懸命である必要はありません。IT-Passports.comの000-541問題集を利用してから、一回で試験に合格することができるだけでなく、試験に必要な技能を身につけることもできます。
没有评论:
发表评论