IT-Passports.comのOracleの1Z0-242試験トレーニング資料は全てのオンラインのトレーニング資料で一番よいものです。我々の知名度はとても高いです。これは受験生の皆さんが資料を利用した後の結果です。IT-Passports.comのOracleの1Z0-242試験トレーニング資料を選んだら、１００パーセントの成功率を保証します。もし失敗だったら、我々は全額で返金します。受験生の皆さんの重要な利益が保障できるようにIT-Passports.comは絶対信頼できるものです。
今の競争の激しいIT業界では、多くの認定試験の合格証明書が君にをとんとん拍子に出世するのを助けることができます。多くの会社は君の実力と昇進がその証明書によって判断します。Oracleの1Z0-242認証試験はIT業界の中で含金度高い試験で、IT-Passports.comがOracleの1Z0-242認証試験について対応性の訓練 を提供しておって、ネットで弊社が提供した部分の問題集をダウンロードしてください。
試験番号：1Z0-242問題集
試験科目：Oracle 「PeopleSoft Application Developer II: App Engine and Integration」
問題と解答：全102問
Oracleの1Z0-242認定試験を受験する気があるのですか。この試験を受けた身の回りの人がきっと多くいるでしょう。これは非常に大切な試験で、試験に合格して1Z0-242認証資格を取ると、あなたは多くのメリットを得られますから。では、他の人を頼んで試験に合格する対策を教えてもらったのですか。試験に準備する方法が色々ありますが、最も高効率なのは、きっと良いツールを利用することですね。ところで、あなたにとってどんなツールが良いと言えるのですか。もちろんIT-Passports.comの1Z0-242問題集です。
IT-Passports.comがもっと早くOracleの1Z0-242認証試験に合格させるサイトで、Oracleの1Z0-242認証試験についての問題集が市場にどんどん湧いてきます。IT-Passports.comを選択したら、成功をとりましょう。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/1Z0-242.html
NO.1 View the Exhibit.
On the Employee Review page, you have a business rule with these requirements:
1. If Review Type is Supervisor, then the prompt for Reviewer ID returns only supervisors.
2. If Review Type is Peer or Performance, then the prompt for Reviewer ID returns all employees.
Select the three steps required to implement this business rule. (Choose three.)
A. Associate the REVIEWER_ID field with REVIEWER_VW.
B. Create REVIEWER_VW as a dynamic view of the EMPLOYEE table.
C. Add the DERIVED.EDITTABLE field to the page and make it invisible.
D. Set the prompt table edit for the REVIEWER_ID field to REVIEWER_VW.
E. Set the prompt table edit for the REVIEWER_ID field to DERIVED.%EDITTABLE.
F. Use a SQL Select statement in PeopleCode to populate the REVIEWER_VW view.
G. Use a conditional statement in PeopleCode to populate the DERIVED.EDITTABLE field.
Answer: CEG
Oracle 1Z0-242問題集 1Z0-242 1Z0-242過去問
NO.2 An Application Engine program inserts rows into PS_VENDOR.
The program encounters an error and abends (ends abnormally).
You correct the error, but now PS_VENDOR is in an unknown state.
Select the correct statement.
A. If Log File was enabled in Configuration Manager, a script file was created that you use to return the
database to its original state. After you correct the error, you can run the program again.
B. If Recover was enabled for the program, the changes to PS_VENDOR are rolled back. After you
correct the error, you can run the program again.
C. If Restart was enabled for the program, a checkpoint was saved with the last commit. After you correct
the error, you can restart the program and processing will resume from the point of the last commit.
D. If Resume was enabled in PeopleSoft Process Scheduler, the program automatically resumes
processing after the condition that caused the error is corrected.
E. If a state record was defined for the program, PS_VENDOR is restored based on parameters that were
written to the state record. Then you can restart the program using the same run control parameters.
Answer: C
Oracle 1Z0-242 1Z0-242過去問
NO.3 You want to examine the component buffer for the Customer Orders (PSU_CUST_ORDER )
component. Which four steps are necessary? (Choose four.)
A. Start the PeopleCode Debugger and set a breakpoint.
B. Access the Structure view on the PSU_CUST_ORDER component.
C. In Application Designer, select Component Buffers.
D. Access the Customer Orders component in the browser and trigger the breakpoint. Return to
PeopleSoft Application Designer when the breakpoint triggers.
E. Open, or create, a PeopleCode program that will execute while Customer Orders is running in the
browser.
F. Drill down through the component hierarchy in the Structure view on the PSU_CUST_ORDER
component.
G. In Application Designer, select Debug, View Component Buffers.
Answer: ADEG
Oracle参考書 1Z0-242 1Z0-242認定資格 1Z0-242問題集 1Z0-242
NO.4 View the Exhibit.
Your client is upgrading its purchasing application to use object-oriented PeopleCode to incorporate the
benefits of application classes.
The PeopleCode for the Purchase Order application is now encapsulated in an Application Package
called PSU_PO. The assign_order_nbr function is now ORDER_NBR, a method of the ORDER class.
You are tasked with modifying this program to call the new ORDER_NBR method.
Which four PeopleCode statements will you use in the new program? (Choose four.)
A. Class PSU_PO:ORDER;
B. &New.ORDER_NBR(PSU_PO_HDR.ORDER_NBR);
C. Import PSU_PO:ORDER;
D. Declare method PSU_PO:ORDER:ORDER_NBR;
E. &New = Create Order();
F. Local ORDER &New;
G. Method ORDER_NBR (&ORDER_NBR As Field out);
Answer: BCEF
Oracle 1Z0-242認証試験 1Z0-242問題集
NO.5 View the Exhibit.
This run control page executes an Application Engine program that updates the Course table using the
parameters entered by a user.
In addition to the run control page, which three elements must be in place? (Choose three.)
A. A state record with fields to hold input parameters
B. Component variables to pass the input parameters
C. A data buffer object to retrieve the input parameters
D. Application Engine SQL to retrieve the input parameters
E. A PeopleCode record object to update the Course table
F. A Process Instance table to store run control parameters
G. A run control record with fields to store the input parameters
Answer: ADG
Oracle 1Z0-242 1Z0-242 1Z0-242 1Z0-242認証試験
NO.6 How do you configure Process Scheduler to initiate an Application Engine trace for SQL and Step?
A. Add %%TRACE%% %%SQL%% %%STEP%% to the parameter list for the Process Type.
B. On the Run Control page, select the SQL Trace and Step Trace check boxes.
C. On the Process Monitor page, select the SQL Trace and Step Trace check boxes.
D. On the Process Definition Override Options page, for Parameter List, select Append and enter
-TRACE 3.
E. On the Process Definition Override Options page, for Parameter List, select Append and enter -TRACE
SQL STEP.
F. On the Process Definition Override Options page, for Parameter List, select Append and
enter %%TRACE%% %%SQL%% %%STEP%%.
Answer: D
Oracle認定試験 1Z0-242 1Z0-242認定資格
NO.7 Examine the join in this Select statement:
SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE A.TASK = B.TASK
AND A.RESOURCE = B.RESOURCE
Select the equivalent Select statement.
A. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Join(A.TASK, B.RESOURCE)
B. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Common(PROJECT A, EFFORT B)
C. SELECT A.TASK , B.EFFORT_AMT
FROM %Common(KEYS, PROJECT A, EFFORT B)
D. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Join(COMMON_KEYS, TASK A, EFFORT_AMT B)
E. SELECT A.TASK , B.EFFORT_AMT
FROM %Join(COMMON_KEYS, PROJECT A, EFFORT B)
Answer: E
Oracle 1Z0-242認定試験 1Z0-242
NO.8 The Customer Orders page uses data from the ITEM table to perform price calculations. You decide to
write a PeopleCode program to create a stand-alone rowset that will load data from the ITEM table into
the data buffer. Select three PeopleCode statements that can be used with stand-alone rowsets. (Choose
three.)
A. &RS_Item = GetRowSet(SCROLL.ITEM);
B. &RS_Item = CreateRowSet(RECORD.ITEM);
C. &Price = &RS_Item(&i).ITEM.PRICE.Value;
D. &RS_Item.Select("Where ITEM = :1", CUST_ORDER.ITEM);
E. &RS_Item.Fill("Where CUST_TYPE = :1", CUST_ORDER.TYPE);
F. &RS_Item = ScrollSelect(1,Scroll.ITEM, Record.ITEM, ("Where CUST_TYPE = :1", CUST_ORDER.
CUST_TYPE);
Answer: BCE
Oracle認定試験 1Z0-242問題集 1Z0-242 1Z0-242
NO.9 You add a dynamic call to an Application Engine program following these steps:
1. Add the fields AE_APPLID and AE_SECTION to the state record if they are not already present.
2. Build the state record.
3. Verify that the state record is the default state record for the Application Engine program.
4. In a PeopleCode action, use a conditional test to populate the fields AE_APPLID and AE_SECTION
with an Application Engine program name and section name, respectively.
5. Following the PeopleCode action, add a Call Section action.
Select the correct statement.
A. The Application Engine program will execute as expected.
B. Step 2 is not needed for dynamic call.
C. Step 3 is not needed.
D. Add a step after step 5 to insert a SQL action that will use the values in the state record to populate the
Program and Section fields of the Application Engine Call Section action.
E. Add a step after step 5 to select the Dynamic Call check box in the Call Section action.
F. Step 4 is wrong. The PeopleCode program should use the AESection class to issue the dynamic call.
Answer: E
Oracle 1Z0-242 1Z0-242認定証 1Z0-242 1Z0-242
NO.10 You want to see exactly when a PeopleCode program fires in the context of the Component Processor
flow. Which two methods will work? (Choose two.)
A. Insert a Print() statement in the program.
B. Insert a WinMessage() statement in the program.
C. Insert a MessageCatalog() statement in the program.
D. Run the PeopleCode Debugger and insert a breakpoint on the program.
E. Run the PeopleCode Debugger and select Debug, View Component Buffers.
Answer: BD
Oracle 1Z0-242過去問 1Z0-242問題集
NO.11 The Get Student Enrollments page uses a PeopleCode program to select and display rows based on
user input. When the user clicks Refresh, FieldChange PeopleCode populates a stand-alone rowset
using a Select method. When you test the program, the new rows are appended to the previous rows
instead of replacing them. How do you fix this problem?
A. Use a work scroll instead of a stand-alone rowset.
B. Add &Rowset.Flush(); after the Select method.
C. Use an Update method instead of a Select method.
D. Add &Rowset.Flush(); before the Select method.
E. Add &Rowset.Refresh (); after the Select method.
F. Add &Rowset.Refresh(); before the Select method.
Answer: D
Oracle 1Z0-242認証試験 1Z0-242問題集 1Z0-242 1Z0-242
NO.12 Evaluate this PeopleCode snippet.
Local Array of Number &MyArray;
Local Any &Len, &Result;
&MyArray = CreateArray(3);
&MyArray[1] = 100;
&MyArray[2] = 200;
&MyArray[3] = 300;
&Result = &MyArray.POP();
&Len = &MyArray.LEN;
&End = &MyArray[&Len];
What are the correct values for &Result and &End?
A. &Result is 300
&End is 200
B. &Result is 300
&End is Null
C. &Result is 300
&End is 300
D. &Result is Null
&End is 300
E. &Result is 100
&End is 300
Answer: A
Oracle認証試験 1Z0-242 1Z0-242
NO.13 You modify an Application Engine program to use parallel processing with temporary tables.
The Application Engine program includes this code snippet, which is part of a SQL statement that inserts
rows into a temporary table.
INSERT INTO PS_CRS_FULL_TMP
What changes do you need to make to the code so that the Application Engine program will implement
parallel processing properly?
A. No changes to the code are needed as long as the temporary table has been properly configured for
parallel processing.
B. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO PS_CRS_FULL_TMP so that the
meta-SQL resolves to the correct state record at run time.
C. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO %Table(CRS_FULL_TMP) so that
the system variables resolve to the correct syntax at run time.
D. Replace INSERT INTO PS_CRS_FULL_TMP with INSERT INTO %Table(CRS_FULL_TMP) so that
the meta-SQL resolves to the correct temporary table instance at run time.
E. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO %Temp(CRS_FULL_TMP) so that
the meta-SQL resolves to the correct syntax and temporary table instance at run time.
Answer: D
Oracle認定証 1Z0-242 1Z0-242 1Z0-242認定資格 1Z0-242
NO.14 Select three Application Engine action types that can be used to control program flow. (Choose three.)
A. Log Message
B. Call Section
C. XSLT
D. PeopleCode
E. Do While
F. Evaluate
Answer: BDE
Oracle参考書 1Z0-242 1Z0-242練習問題
NO.15 A Process Scheduler process is configured to run an Application Engine program. You need to modify
the process to use parameters entered by the user at run time. Which four additional steps do you need to
take? (Choose four.)
A. Create a process type for the new process.
B. Add bind variables to the command-line parameters.
C. Write a PeopleCode program to pass the parameters.
D. Create a state record with fields to pass input parameters.
E. Create a run control page with fields to enter the input parameters.
F. Create a run control record with fields to store the input parameters.
G. Modify the Application Engine program to retrieve the input parameters.
Answer: DEFG
Oracle認定試験 1Z0-242 1Z0-242認定資格 1Z0-242 1Z0-242認定試験 1Z0-242
NO.16 Here is a snippet of PeopleCode that uses the Fetch method of the SQL class.
&SQL = CreateSQL("Select EFFORT_AMT from PS_PSU_TASK_EFFORT where TASK= :1",
PSU_TASK_TBL.TASK);
&Var1 = &SQL.Fetch(&Var2);
Select the two correct statements. (Choose two.)
A. &Var2 specifies which row to fetch.
B. &Var2 specifies which field to fetch.
C. &Var1 is populated with TRUE if a row is fetched.
D. &Var1 is populated with the number of rows returned.
E. &Var2 is populated with EFFORT_AMT from the row fetched.
F. &Var1 is populated with EFFORT_AMT from the row fetched.
G. &Var1 is populated with EFFORT_AMT from the first row returned.
Answer: CE
Oracle認証試験 1Z0-242 1Z0-242認定試験
NO.17 An Application Engine program uses a Do Select action. What occurs when the Select statement is
executed?
A. Each row returned by the Select statement is stored in the state record. The Select statement
continues until no more rows are returned. Then, the control passes to the calling section.
B. All rows returned by the Select statement are stored in a cursor. Then, the control is passed to the
calling section.
C. All rows returned by the Select statement are stored in the state record. Then, the control is passed to
the next section in the program.
D. All rows returned by the Select statement are stored in a cursor. The first row is stored in the state
record. Then, the remaining actions in the step are processed sequentially. Thereafter, the control returns
to the Do Select to fetch another row, until no more rows are returned.
E. When a row is returned, the remaining steps in the section execute and control returns to the calling
step.
F. When a row is returned, it is stored in the state record. Then, the control is passed to the calling section.
Answer: D
Oracle認定試験 1Z0-242 1Z0-242 1Z0-242認定証
NO.18 View the Exhibit.
A PeopleCode program at level 0 checks the values for Percent Available (PCT_AVAILABLE) at level 1.
Analyze this code snippet.
Local Rowset &RS_Level0, &RS_Level1;
Local Row &Row_Level0, &Row_Level1;
Local Record &Rec_TaskRsrc;
Local Field & Fld_PctAvail ;
&RS_Level0 = GetLevel0();
&Row_Level0 = &RS_Level0.GetRow(1);
&RS_Level1 = &Row_Level0.GetRowset(Scroll.PSU_TASK_RSRC);
&Row_Level1 = &RS_Level1.GetRow(1);
&Rec_TaskRsrc = &Row_Level1.GetRecord(Record.PSU_Task_RSRC);
&Fld_PctAvail = &Rec_TaskRsrc.GetField(Field.PCT_AVAILABLE);
&Pct = &Fld_PctAvail.Value;
Select the correct option.
A. The program will produce the expected results.
B. The program is missing a loop to process each row in the level 1 rowset.
C. The program is missing a loop to process each rowset in the level 1 row.
D. The program can be simplified to:
&Pct = &RS_Level0.PSU_Task_RSRC.PCT_AVAILABLE.Value;
E. This line of code is not needed:
&RS_Level1 = &Row_Level0.GetRowset(Scroll.PSU_TASK_RSRC);
F. The &RS_Level0 = GetLevel0(); function is missing the Level 0 scroll name.
Answer: B
Oracle過去問 1Z0-242 1Z0-242認証試験 1Z0-242 1Z0-242
NO.19 An Application Engine program requires a loop that will exit after 1000 rows have been processed.
The COUNTER field in the state record is incremented in each iteration of the loop. Which option contains
code that could be used in a Do While action to test for COUNTER?
A. Do While %Bind(Counter) < 1000
B. %SELECT (COUNTER)
FROM PS_INSTALLATION
Where COUNTER < 1000
C. If %Bind(Counter) >= 1000 then
Exit;
D. %Select(COUNTER)
FROM PS_STATE_AET
Where COUNTER < 1000
E. %Select(COUNTER)
SELECT 'X'
FROM PS_INSTALLATION
WHERE %Bind(COUNTER) < 1000;
Answer: E
Oracle 1Z0-242 1Z0-242 1Z0-242認定証
NO.20 View the Exhibit.
An object-oriented PeopleCode program traverses the data buffer to get the value for Session Number
(SESSION_NBR) in the Session Details record (PSU_CRS_SESSN) on the Course Sessions page.
The program uses a built-in function to instantiate the Level 0 object, then uses object methods to
instantiate the remaining data buffer objects.
Select the option that represents the order in which the program instantiates the data buffer objects.
A. &Row_Level0, &Row _Level1, &Record, &Field
B. &Rowset_Level0, &Row_Level1, &Record, &Field
C. &Rowset_Level0, &Rowset_Level1, &Row_Level1, &Record, &Field
D. &Rowset_Level0, &Row _Level0, &Rowset_Level1, &Row _Level1, &Record, &Field
Answer: D
Oracle 1Z0-242 1Z0-242参考書 1Z0-242練習問題 1Z0-242認定試験 1Z0-242
業種別の人々は自分が将来何か成績を作るようにずっと努力しています。IT業種で勤めているあなたもきっとずっと努力して自分の技能を向上させているでしょう。では、最近最も人気があるOracleの1Z0-242認定試験の認証資格を既に取りましたか。1Z0-242試験に対して、あなたはいくらぐらい分かっていますか。もしこの試験に関連する知識が非常に不足であると同時にこの試験に合格したい場合、あなたはどうするつもりですか。そうですか。どうするか全然分からないですか。そうしても焦らないでください。IT-Passports.comはあなたに援助を提供します。
没有评论:
发表评论