現在のこの社会の中で、優秀な人材が揃って、IT人材も多く、競争もとてもはげしくて、だから多くのIT者はIT認証試験に参加してIT業界での地位のために奮闘して、4A0-103試験はAlcatel-Lucentの一つ重要な認証試験で、多くの人がAlcatel-Lucent認証されたくて試験に合格しなければなりません。
Alcatel-Lucentの4A0-103認定試験はIT-Passports.comの最優秀な専門家チームが自分の知識と業界の経験を利用してどんどん研究した、満足Alcatel-Lucent認証受験生の需要に満たすの書籍がほかのサイトにも見えますが、IT-Passports.comの商品が最も保障があって、君の最良の選択になります。
他のたくさんのトレーニング資料より、IT-Passports.comのAlcatel-Lucentの4A0-103試験トレーニング資料は一番良いものです。IT認証のトレーニング資料が必要としたら、IT-Passports.comのAlcatel-Lucentの4A0-103試験トレーニング資料を利用しなければ絶対後悔しますよ。IT-Passports.comのトレーニング資料を選んだら、あなたは一生で利益を受けることができます。
IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにAlcatel-Lucentの4A0-103認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。IT-Passports.comのAlcatel-Lucentの4A0-103試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。
試験番号：4A0-103問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Multiprotocol Label Switching」
問題と解答：全98問
成功した方法を見つけるだけで、失敗の言い訳をしないでください。Alcatel-Lucentの4A0-103試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。IT-Passports.comのAlcatel-Lucentの4A0-103試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。
IT-Passports.comのAlcatel-Lucentの4A0-103の試験問題と解答はあなたが受験する前にすべての必要とした準備資料を提供しています。Alcatel-Lucentの4A0-103の認証試験について、あなたは異なるサイトや書籍で色々な問題を見つけることができます。しかし、ロジックが接続されているかどうかはキーです。IT-Passports.comの問題と解答は初めに試験を受けるあなたが気楽に成功することを助けるだけではなく、あなたの貴重な時間を節約することもできます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-103.html
NO.1 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-The protected LSP path is R1-R2-R3.
-All links are of equal cost.
Which of the following statements is true? (Choose two)
A. Router R1 is the LSP originator and is also a PLR.
B. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R2-R3.
C. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R3.
D. If the R2-R3 link fails, router R3 becomes a PLR
E. None of the nodes can be protected with FRR.
Answer: A,C
Alcatel-Lucent認定証 4A0-103問題集 4A0-103 4A0-103 4A0-103
NO.2 Assume that, on the Alcatel-Lucent 7750 SR, an LSP is configured with one-to-one FRR and node
protection. Which of the following statements are FALSE? (Choose two)
A. Each PLR signals a detour LSP that avoids the downstream node. If the downstream node cannot be
avoided, a detour LSP that avoids the downstream link is signaled.
B. The detour LSP can take one or more hops before merging back on the protected LSP.
C. The merge point of the protected LSP must be the next-next-hop node
D. The ingress router will set the local protection desired flag in the session attribute object of the path
message to inform all routers along the protected LSP path to establish detour LSPs.
E. The label recording desired flag must be set in the session attribute object in order for the PLR to know
what label to swap when using the detour LSP.
Answer: C,E
Alcatel-Lucent 4A0-103認定資格 4A0-103認証試験 4A0-103参考書
NO.3 Which command can be used to verify the LDP settings for label distribution and retention?
A. show router ldp default
B. show router ldp parameters
C. show router ldp settings
D. show router mpls settings
E. show router mpls label-options
Answer: B
Alcatel-Lucent 4A0-103認定資格 4A0-103 4A0-103
NO.4 You wish to advertise LDP labels for all local networks; which is the most effective policy statement to
use?
A. from prefix-list direct
B. match local
C. from protocol direct
D. match protocol direct
E. from protocol local
Answer: C
Alcatel-Lucent 4A0-103 4A0-103認定資格 4A0-103 4A0-103過去問
NO.5 Which of the following indicates the path over which an LSP's tail end router will return an RSVP RESV
message?
A. The IGP FIB.
B. The Reservation State Block (RSB)
C. The Path State Block (PSB)
D. The opaque database.
Answer: C
Alcatel-Lucent 4A0-103 4A0-103問題集
NO.6 Router R3 signals an LSP, reserving 1Gbps bandwidth on a 10Gbps link. RSVP configuration limits
reservable bandwidth to 20 percent on the egress interface. Which of the following statements is true?
A. The egress RSVP interface has 80 percent bandwidth unreserved.
B. LSPs can reserve an additional 9.9 Gbps bandwidth on this RSVP interface.
C. The head end reserves 100Mbps for the LSP
D. The egress RSVP interface has 1 Gbps bandwidth unreserved.
Answer: D
Alcatel-Lucent 4A0-103認定試験 4A0-103参考書
NO.7 Click on the exhibit button below.
Given the output below, which of the following statements are true? (Choose three)
A. A packet arriving with label 131066 and destined for prefix 10.10.10.243/32 will be forwarded out
interface 1/1/4, with label 131070.
B. LDP ECMP is enabled.
C. The router ¯ s sys t e m add r ess i s 10 . 10 . 10 . 242 / 32 .
D. There are multiple LSPs to reach FEC 10.10.10.244/32.
E. The router cannot receive any unlabeled packets destined for prefix 10.10.10 223/32.
Answer: A,B,D
Alcatel-Lucent過去問 4A0-103認定資格 4A0-103 4A0-103認定資格 4A0-103 4A0-103問題集
NO.8 Which of the following statements best describe MPLS fast reroute characteristics? (Choose two)
A. Fast reroute requires you to manually define detour paths.
B. Fast reroute provides path protection close to the failure point
C. Fast reroute performs automatic path calculation and signaling.
D. Fast reroute protects both primary and secondary paths.
Answer: B,C
Alcatel-Lucent過去問 4A0-103 4A0-103 4A0-103
NO.9 What is the significance of receiving a packet with the bottom MPLS label S bit set to 1?
A. It results in forwarding based on the next packet header.
B. It indicates that the label is the bottom of the MPLS label stack.
C. It indicates that the label is the top of the MPLS label stack.
D. Any LSR that receives an S bit set to 1 must discard the packet.
Answer: B
Alcatel-Lucent 4A0-103 4A0-103過去問 4A0-103
NO.10 Which of the following statements regarding LSP path configuration are true? (Choose three)
A. The path must include at least one hop.
B. The path may be used multiple times in a single LSP.
C. The path may comprise loose hop entries only.
D. The path must define the LSP's tail end.
E. The path may be used for multiple LSPs.
Answer: C,E
Alcatel-Lucent 4A0-103 4A0-103参考書 4A0-103認定資格
NO.11 Click on the exhibit button below.
Given the configuration below, what is the system ID of the destination node?
A. 10.32.1.2
B. 10.1.478
C. 1048.1.1
D. Cannot tell from this configuration
E. 10.1.2.2
Answer: B
Alcatel-Lucent 4A0-103認定試験 4A0-103認定試験 4A0-103
NO.12 Which of the following statements best describes downstream unsolicited label distribution?
A. An LER may answer requests for label mappings immediately, without waiting for a label mapping from
the next-hop.
B. An LER may advertise label mappings to all peers for which it might be a next-hop for a given FEC.
C. An LER propagates a label mapping downstream for a FEC. only if it has a label mapping for the FEC
next-hop.
D. An LER will only distribute a label for a FEC when it has been requested to do so.
Answer: B
Alcatel-Lucent問題集 4A0-103問題集 4A0-103認定試験 4A0-103認定証 4A0-103認定資格
NO.13 Which of the following is defined by the following statement? All label mappings received from all peer
LSRs are saved.
A. Conservative label retention
B. Liberal label retention.
C. Downstream on demand.
D. Downstream unsolicited.
Answer: B
Alcatel-Lucent過去問 4A0-103認定証 4A0-103 4A0-103認証試験 4A0-103
NO.14 Click on the exhibit button below.
Consider the following:
-Routers R1 and R4 are in Area 1.
-Routers R4 and R5 in Area 0.
-Routers R5 and R3 are in Area 2.
To support LDP-over-RSVP tunnels between routers R1 and R3 over path R1-R4-R5-R3, with which
routers will router R5 require targeted sessions? (Choose two)
A. Router R1
B. Router R4
C. Router R2
D. Router R3
Answer: B,D
Alcatel-Lucent 4A0-103認証試験 4A0-103練習問題 4A0-103問題集 4A0-103
NO.15 Which of the following message types does RSVP use to set up an LSP? (Choose two)
A. Path message
B. iLER message
C. Resv message
D. LSP setup call request
E. eLER message
Answer: A,C
Alcatel-Lucent 4A0-103 4A0-103 4A0-103
NO.16 In MPLS, labels are distributed in the opposite direction of the data flow.
A. TRUE
B. FALSE
Answer: A
Alcatel-Lucent 4A0-103問題集 4A0-103認定証
NO.17 During node protection signaling, the PLR knows the address of the MP from which of the following
methods?
A. The PLR issues a RSVP path message to the destination router to request the address of the MP.
B. The PLR learns the address of the MP from the ERO.
C. The PLR learns the address of the MP from the RRO
D. The PLR learns the address of the MP from the targeted RSVP hello message.
E. The PLR does not need to know the address of the MP.
Answer: C
Alcatel-Lucent 4A0-103 4A0-103参考書 4A0-103 4A0-103
NO.18 Click on the exhibit button below.
Assuming that LSP R1-R2-R3 requests the default fast reroute configuration, which router becomes a
DMP for the detour tunnels?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: E
Alcatel-Lucent 4A0-103認証試験 4A0-103 4A0-103参考書 4A0-103 4A0-103参考書
NO.19 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-Two protected LSPs with the path R1-R2-R3
-Both LSPs enable facility bypass and link protection.
When router R1 is the PLR, which router becomes the MP?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: B
Alcatel-Lucent参考書 4A0-103認定証 4A0-103 4A0-103
NO.20 What is the common usage of the MPLS EXP bits?
A. Each implementation can use them as they see fit.
B. They are used to carry the Ethertype value.
C. They are used to carry the TTL value.
D. They are used to carry QoS classification.
E. They are used to carry fragmentation flag information
Answer: D
Alcatel-Lucent 4A0-103 4A0-103
もう既にAlcatel-Lucentの4A0-103認定試験を申し込みましたか。「もうすぐ試験の時間なのに、まだ試験に合格する自信を持っていないですが、どうしたらいいでしょうか。何か試験に合格するショートカットがあるのですか。試験参考書を読み終わる時間も足りないですから・・・」いまこのような気持ちがありますか。そうしても焦らないでくださいよ。試験を目前に控えても、ちゃんと試験に準備するチャンスもあります。何のチャンスですかと聞きたいでしょう。それはIT-Passports.comの4A0-103問題集です。これは効果的な資料で、あなたを短時間で試験に十分に準備させることができます。この問題集の的中率がとても高いですから、問題集に出るすべての問題と回答を覚える限り、4A0-103認定試験に合格することができます。
没有评论:
发表评论