IT-Passports.comは我々が研究したトレーニング資料を無料に更新します。それはあなたがいつでも最新の4A0-101試験トレーニング資料をもらえるということです。4A0-101認定試験の目標が変更されば、IT-Passports.comが提供した勉強資料も変化に追従して内容を変えます。IT-Passports.com は各受験生のニーズを知っていて、あなたが4A0-101認定試験に受かることに有効なヘルプを差し上げます。あなたが首尾よく試験に合格するように、我々は最も有利な価格と最高のクオリティーを提供して差し上げます。
あなたの予算が限られている場合に完全な問題集を必要としたら、IT-Passports.comのAlcatel-Lucentの4A0-101試験トレーニング資料を試してみてください。IT-Passports.comはあなたのIT認証試験の護衛になれて、現在インターネットで一番人気があるトレーニング資料が提供されたサイトです。Alcatel-Lucentの4A0-101試験はあなたのキャリアのマイルストーンで、競争が激しいこの時代で、これまで以上に重要になりました。あなたは一回で気楽に試験に合格することを保証します。将来で新しいチャンスを作って、仕事が楽しげにやらせます。IT-Passports.comの値段よりそれが創造する価値ははるかに大きいです。
4A0-101認定試験と言ったら、信頼できるのを無視することは難しい。IT-Passports.com の4A0-101試験トレーニング資料は特別にデザインしてできるだけあなたの仕事の効率を改善するのソフトです。IT-Passports.comは世界的にこの試験の合格率を最大限に高めることに力を尽くしています。
IT-Passports.comは初めて試験を受けるあなたが一回で試験に合格して、認証資格を取ることを保証します。IT-Passports.comが提供して差し上げたのは高品質のAlcatel-Lucentの4A0-101模擬問題集で、あなたがステップバイステップで試験に準備する手順を指導しています。IT-Passports.comのAlcatel-Lucentの4A0-101試験問題集は絶対あなたに成功をもたらすことを保証します。IT-Passports.comのAlcatel-Lucentの4A0-101認定試験に準備するために色々な方法がありますが、
試験番号：4A0-101問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Interior Routing Protocols and High Availability」
問題と解答：全177問
Alcatel-Lucentの4A0-101認定試験はIT業界の中でとても普遍的な試験になります。試験の準備は時間とエネルギーがかかります。時は金なり社会に時間を無駄しないようによいツルを探し出されるのはみんなの希望です。IT-Passports.comのAlcatel-Lucentの4A0-101認証試験の問題集は君の20時間だけかかりますよ。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-101.html
NO.1 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming that
there are no stub networks, which of the following statements regarding type 4 LSA generation is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA that
is flooded to area 2.
Answer: D
Alcatel-Lucent 4A0-101 4A0-101参考書 4A0-101問題集 4A0-101
NO.2 Which of the following commands can be used to display the number of SPF computations that have
been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A
Alcatel-Lucent参考書 4A0-101認証試験 4A0-101過去問 4A0-101
NO.3 Which of the following statements apply to link state protocol behavior? Choose three answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C
Alcatel-Lucent認証試験 4A0-101 4A0-101 4A0-101 4A0-101認定証 4A0-101練習問題
NO.4 Click the exhibit button.
A static route is created on router R1 using the "static-route 0.0.0.0/0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C
Alcatel-Lucent 4A0-101 4A0-101認証試験 4A0-101
NO.5 What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B
Alcatel-Lucent 4A0-101 4A0-101問題集 4A0-101
NO.6 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B
Alcatel-Lucent認証試験 4A0-101 4A0-101問題集 4A0-101
NO.7 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D
Alcatel-Lucent問題集 4A0-101 4A0-101参考書 4A0-101参考書
NO.8 Static routing will be used in a network between a corporate head office, with many connected networks,
and a branch office, with one connection to the head office. Which of the following best describes the
likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more specific
static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office router will
have a default route.
Answer: D
Alcatel-Lucent認定試験 4A0-101 4A0-101 4A0-101 4A0-101認定資格
NO.9 Which of the following conditions will prevent an OSPF adjacency from reaching the full state? Choose
three answers.
A. MTU mismatch
B. Incorrect subnet mask
C. System interface not included in OSPF
D. Area ID not the same
E. Different metric set on each end of the link
F. Router ID not defined
Answer: A,B,D
Alcatel-Lucent認証試験 4A0-101 4A0-101 4A0-101 4A0-101問題集
NO.10 Click the exhibit button.
Routers R1 R2, and R3 are running a classful routing protocol between them. Assuming that router R1
advertises all directly connected networks, how will these networks be represented in router R3's routing
table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/24 and one entry for 10.1.2.0/24.
C. The networks will be represented with one entry of 10.0.0.0/8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/24 in router R3's route table.
Answer: C
Alcatel-Lucent 4A0-101 4A0-101 4A0-101
NO.11 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D
Alcatel-Lucent練習問題 4A0-101 4A0-101 4A0-101問題集
NO.12 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. How many
type 4 LSAs will be present in the network?
A. One.
B. One for each of the routers in area 0
C. One for each of the external routes exported by router R1.
D. Type 4 LSAs are not generated in this network topology.
Answer: D
Alcatel-Lucent 4A0-101問題集 4A0-101 4A0-101認定資格
NO.13 Click the exhibit button.
What can you deduce from the show command on router R6?
A. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.5.
B. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment;
however, this command does not indicate whether 10.10.10.3 or 10.10.10.5 is the DR or BDR.
C. The router R6 interface is in a multi-access segment. It is the BDR, which is why it is not adjacent to the
other routers.
D. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.3.
Answer: B
Alcatel-Lucent問題集 4A0-101認定試験 4A0-101 4A0-101
NO.14 Click the exhibit button.
The following command sequence is executed on router R2:
A:R2# configure router ospf router-id 10.10.10.99
A:R2# configure router router-id 10.10.10.66
On router R1, what router ID appears for router R2 directly after these commands are executed?
A. 10.10.10.99
B. 10.10.10.66
C. 10.10.10.2
D. 10.10.10.1
Answer: C
Alcatel-Lucent認定証 4A0-101問題集 4A0-101 4A0-101 4A0-101 4A0-101
NO.15 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2 goes
down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of Hello
timeouts. At this point, both routers R1 and R2 re-compute their link state database and send updates to
their adjacent routers. Once the process is complete for all routers, the networks have converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link is
down. At this point, both routers R1 and R2 re-compute their link statedatabase and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A
Alcatel-Lucent 4A0-101認定証 4A0-101過去問 4A0-101認定資格
NO.16 Which of the following statements regarding distance vectors protocols are true.?
(Choose two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted beyond the
immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant routers
and how they interconnect
Answer: A
Alcatel-Lucent 4A0-101 4A0-101練習問題 4A0-101
NO.17 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B
Alcatel-Lucent 4A0-101参考書 4A0-101認定証
NO.18 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach the
network behind router R2?
A. configure router static-route 139.120.121.0/24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2/24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/24 next-hop 139.120.121.2
Answer: A
Alcatel-Lucent問題集 4A0-101認定資格 4A0-101過去問
NO.19 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure router
static-route 10.2.3.0/24 next-hop 10.1.2.1" command. What is the correct traceroute command to test this
static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A
Alcatel-Lucent 4A0-101 4A0-101過去問 4A0-101
NO.20 When a router receives an IP packet, but does not find a match in the routing table for the destination IP
address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B
Alcatel-Lucent 4A0-101認定資格 4A0-101練習問題
Alcatel-Lucentの4A0-101認定試験に受かりたいのなら、適切なトレーニングツールを選択する必要があります。Alcatel-Lucentの4A0-101認定試験に関する研究資料が重要な一部です。我々IT-Passports.comはAlcatel-Lucentの4A0-101認定試験に対する効果的な資料を提供できます。IT-Passports.comのIT専門家は全員が実力と豊富な経験を持っているのですから、彼らが研究した材料は実際の試験問題と殆ど同じです。IT-Passports.comは特別に受験生に便宜を提供するためのサイトで、受験生が首尾よく試験に合格することを助けられます。
没有评论:
发表评论