「成功っていうのはどちらですか。」このように質問した人がいます。私は答えてあげますよ。IT-Passports.comを選んだら成功を選ぶということです。IT-Passports.comのHPのHP2-Z12試験トレーニング資料はIT認証試験を受ける全ての受験生が試験に合格することを助けるものです。この資料はHPのHP2-Z12試験のために特別に研究されたもので、受験生からの良い評価をたくさんもらいました。IT-Passports.comのHPのHP2-Z12試験トレーニング資料を選んだらぜひ成功するということを証明しました。
あなたのHPのHP2-Z12認証試験に合格させるのはIT-Passports.comが賢明な選択で購入する前にインターネットで無料な問題集をダウンロードしてください。そうしたらあなたがHPのHP2-Z12認定試験にもっと自信を増加して、もし失敗したら、全額で返金いたします。
HPのHP2-Z12認定試験は人気があるIT認証に属するもので、野心家としてのIT専門家の念願です。このような受験生はHP2-Z12認定試験で高い点数を取得して、自分の構成ファイルは市場の需要と互換性があるように充分な準備をするのは必要です。
HP2-Z12認証試験に合格することは他の世界の有名な認証に合格して国際の承認と受け入れを取ることと同じです。HP2-Z12認定試験もIT領域の幅広い認証を取得しました。世界各地でHP2-Z12試験に受かることを通じて自分のキャリアをもっと向上させる人々がたくさんいます。IT-Passports.comで、あなたは自分に向いている製品をどちらでも選べます。
試験番号:HP2-Z12問題集
試験科目:HP 「Servicing HP Networking Products」
問題と解答:全94問
IT-Passports.comの商品はIT業界の専門家が自分の豊かな知識と経験を利用して認証試験に対して研究出たので品質がいいの試験の資料でございます。受験者がIT-Passports.comを選択したら高度専門の試験に100%合格することが問題にならないと保証いたします。
IT-Passports.comのHPのHP2-Z12問題集を買う前に、一部の問題と解答を無料に試用することができます。そうすると、IT-Passports.comのHPのHP2-Z12トレーニング資料の品質をよく知っています。IT-Passports.comのHPのHP2-Z12問題集は絶対あなたの最良の選択です。
他の人の成功を見上げるよりも、自分の成功への努力をしたほうがよいです。IT-Passports.comのHPのHP2-Z12試験トレーニング資料はあなたの成功への第一歩です。この資料を持っていたら、難しいHPのHP2-Z12認定試験に合格することができるようになります。あなたは新しい旅を始めることができ、人生の輝かしい実績を実現することができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/HP2-Z12.html
NO.1 You have been sent to a customer site to check an HP E8212 zlswitch. When you arrive, you notice
that the Fault and Fan Status LEDs are flashing. What is the most likely cause of this LED behavior?
A. The cooling fan is no longer functional
B. The switch is brand new and needs to have the most current firmware installed.
C. The external power supply has failed, causing the fan to malfunction.
D. The switch has failed its self-test
Answer: C
HP参考書 HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12
NO.2 Which device forwards network traffic based only on Layer 2 information?
A. router
B. switch
C. hub
D. firewall
Answer: C
HP HP2-Z12 HP2-Z12過去問 HP2-Z12
NO.3 Which area of the network is considered the backbone?
A. data center
B. core
C. distribution layer
D. LAN access layer
Answer: B
HP過去問 HP2-Z12認定資格 HP2-Z12 HP2-Z12 HP2-Z12
NO.4 You log in to an HP A Series switch over a console session in order to establish IP connectivity
between the switch and the rest of the network. What is the minimum user privilege level needed to
complete this task?
A. Operator
B. Monitor
C. System
D. Manage
Answer: C
HP認定試験 HP2-Z12 HP2-Z12認証試験
NO.5 You are troubleshooting a connection on an HP A Series switch that has one LED per-port. You want to
know if the port is operating in the wrong duplex mode. How do you use the LED to obtain relevant
information?
A. Click the Mode button until the mode LED is blinkinggreenand thencheck the port LED.
B. Click the Mode button until the mode LED is yellow and thencheck the port LED.
C. Check if the port LED is blinking,which indicates its duplex status (while its color indicates speed).
D. Check the color of the port LED, which indicates its duplex status (while its blinking indicates speed).
Answer: B
HP参考書 HP2-Z12 HP2-Z12問題集
NO.6 Several HP A Series switches are distinguished by a dual-personality (or combo) port. What is an
accurate description of this port?
A. It can accept either Ethernet Base-T cable or fiber optic cable
B. It can accept either Ethernet Base-T cable or a small form-factor pluggable (SFP) transceiver
C. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Both can be used simultaneously.
D. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Only one can be used at a time.
Answer: B
HP過去問 HP2-Z12認定証 HP2-Z12 HP2-Z12
NO.7 Which switch is specifically designed for networks that require basic connectivity and have little or no IT
support?
A. fixed-port switch
B. light Layer 3 switch
C. modular switch
D. unmanaged switch
Answer: D
HP HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12問題集 HP2-Z12
NO.8 You check the startup-config on an HP A Series switch and find that the switch uses myconfig.cfg as
the main startup-config and has no backup config. What happens if you use the undo startup
savedconfiguration command?
A. The myconfig.cfg file is deleted, and the switch returns to factory default settings at the next reboot.
B. The myconfig.cfg file becomes the backup startup-config, and the switch returns to factory default
settings at the next reboot.
C. The myconfig.cfg file becomes the backup startup-config, and is booted at the next reboot unless you
set another main startup-config
D. The myconfig.cfg file is retained in the switch's memory, but the switch returns to factory default
settings at the next reboot
Answer: D
HP認定資格 HP2-Z12 HP2-Z12参考書 HP2-Z12練習問題 HP2-Z12認定証 HP2-Z12問題集
NO.9 You are installing an SFP transceiver in an HP A Series switch's SFP port. Which steps should you
perform? (Select two.)
A. Connect the fiber optic cable to the SFP transceiver before installing the transceiver.
B. Slide the transceiver into the SFP port until the spring clips catch.
C. Rotate the clasp, if present on the front of the transceiver, until it catches the knob.
D. Press and hold the spring clips on the SFP port
E. Press and hold the release button below the SFP port.
Answer: B,C
HP認定資格 HP2-Z12認定試験 HP2-Z12
NO.10 DRAG DROP
Match the HP A Series switch user interface with the type of access that it controls.
Answer:
NO.11 Which HP E Switch Series is specifically designed to be deployed in a data center?
A. E4200vl
B. E6200yl
C. E6600
D. E8200zl
Answer: C
HP参考書 HP2-Z12認証試験 HP2-Z12
NO.12 You are servicing an HP A Series switch, which is currently using a file call myconfig.cfg for the
startup-config. You want to preserve your new configuration changes in the switch's startup config.
Which command should you use?
A. write memory
B. save
C. save startup.cfg
D. copy running-config startup-config
Answer: D
HP HP2-Z12問題集 HP2-Z12 HP2-Z12認証試験 HP2-Z12
NO.13 Which E Series switches require two power supplies to be completely operational? (Select two.)
A. HP E4200vl switch
B. HP E5406zl switch
C. HP E5412zl switch
D. HP E2900 al switch
E. HP E8212zl switch
Answer: C,E
HP HP2-Z12認定証 HP2-Z12
NO.14 You are troubleshooting an HP A Series switch. You attempt to log in to both the CLI and the Web
browser interface in several different ways, but you are always prompted for credentials. The customer
tells you that the person who created the passwords is no longer employed by the company. What can
you do to access the switch?
A. Use the failsafe credentials, admin for username and password for password.
B. Press the Reset and Clear buttons on the switch's front panel, holding them for at least 5 seconds, to
clear the password
C. Access the Boot ROM menu and bypass the configuration, starting the switch at factory default
settings.
D. Access the switch over a direct console connection, which always permits access without a password.
Answer: C
HP認証試験 HP2-Z12練習問題 HP2-Z12 HP2-Z12認定資格
NO.15 How can you check the status of the ports that are providing Power over Ethernet (PoE) on an HP
E2610-PWR switch?
A. Use the Mode button to selectPoE and then view the port Link and Mode LEDs
B. Use the Port Locator button to selectPoE and then view the port Status and Link LEDs.
C. View the portPoE LED.
D. Use the switch'sPoE LED and the PoE LED for each port.
Answer: A
HP認証試験 HP2-Z12認定試験 HP2-Z12練習問題 HP2-Z12認定試験
NO.16 You are installing an HP A Series switch that requires a backup power supply as well as extra power for
Power over Ethernet (PoE) devices. Which device should you connect to this switch?
A. RPS 1200 A
B. RPS 1000 A3
C. RPS 800 A
D. RPS500 A3
Answer: B
HP HP2-Z12練習問題 HP2-Z12 HP2-Z12過去問
NO.17 The exhibit shows the Power and seven-segment LEDs of an HP A Series switch. What is the switch's
status?
Exhibit:
A. The switch has member ID 8 in the cluster.
B. The switch has member ID 8 in the cluster, but its attempt to join the cluster has failed.
C. The switch has failed the power on self test (POST) with ID 8.
D. Port number 8 has failed the switch's power on self test (POST).
Answer: C
HP HP2-Z12認定資格 HP2-Z12 HP2-Z12
NO.18 A faulty configuration on an HP A Series switch locked a customer out of the management interface.
You bypass the configuration and gain access to the switch's CLI.Your manager asks
you to send her the configuration to examine.
What must you do?
A. Establish IP connectivity between the switch and a BackUp the Startup-Config to a TFTP Server server
and issue the backup command
B. Use the copy command to copy the configuration to your management station.
C. Establish IP connectivity between the switch and your management station and use the save
command to save the configuration.
D. Use the saved-configuration command to select the startup-config and save it out to your management
station.
Answer: A
HP認証試験 HP2-Z12認定証 HP2-Z12過去問
NO.19 Which HP A Series switches provide Layer 2 functionality and a Web browser interface but no CLI?
A. HP A5800 Series switches
B. HP NJ2000GIntelliJack switches
C. HP A3600-E1 Series switches
D. HP A3100 Series switches
Answer: B
HP認定試験 HP2-Z12 HP2-Z12認定証 HP2-Z12問題集
NO.20 You are installing a redundant power supply in an HP E8212 zl switch. Which procedures are
recommended when installing the new power supply?(Select two.)
A. Remove the copper RFI shielding.
B. Attach the new power supply to a different AC power source than the existing power supply to provide
true redundancy.
C. Tighten the retaining screws on the new power supply until they are snug but not over-tight.
D. Connect the redundant power supply to the AC power source before installing it in the switch.
E. Remove the grounding tap from the console port before installing the power supply.
Answer: B,C
HP認定資格 HP2-Z12過去問 HP2-Z12 HP2-Z12
試験の準備をするためにIT-Passports.comのHPのHP2-Z12試験トレーニング資料を買うのは冒険的行為と思ったとしたら、あなたの人生の全てが冒険なことになります。一番遠いところへ行った人はリスクを背負うことを恐れない人です。また、IT-Passports.comのHPのHP2-Z12試験トレーニング資料が信頼できるのは多くの受験生に証明されたものです。IT-Passports.comのHPのHP2-Z12試験トレーニング資料を利用したらきっと成功できますから、IT-Passports.comを選ばない理由はないです。
没有评论:
发表评论