あまりにも多くのIT認定試験と試験に関連する参考書を見ると、頭が痛いと感じていますか。一体どうしたらでしょうか。どのように選択すべきなのかを知らないなら、私は教えてあげます。最近非常に人気があるMicrosoftの70-691認定試験を選択できます。この認定試験の資格を取得すれば、あなたは大きなメリットを得ることができます。それに、より効率的に試験の準備をするために、IT-Passports.comの70-691試験問題集を選択したほうがいいです。それはあなたが試験に合格する最善の方法です。
IT-Passports.comはMicrosoftの70-691認定試験についてすべて資料を提供するの唯一サイトでございます。受験者はIT-Passports.comが提供した資料を利用して70-691認証試験は問題にならないだけでなく、高い点数も合格することができます。
近年、IT業種の発展はますます速くなることにつれて、ITを勉強する人は急激に多くなりました。人々は自分が将来何か成績を作るようにずっと努力しています。Microsoftの70-691試験はIT業種に欠くことができない認証ですから、試験に合格することに困っている人々はたくさんいます。ここで皆様に良い方法を教えてあげますよ。IT-Passports.comが提供したMicrosoftの70-691トレーニング資料を利用する方法です。あなたが試験に合格することにヘルプをあげられますから。それにIT-Passports.comは１００パーセント合格率を保証します。あなたが任意の損失がないようにもし試験に合格しなければIT-Passports.comは全額で返金できます。
IT-Passports.comを選択したら、成功が遠くではありません。IT-Passports.comが提供するMicrosoftの70-691認証試験問題集が君の試験に合格させます。テストの時に有効なツルが必要でございます。
試験番号：70-691問題集
試験科目：Microsoft 「TS: Windows HPC Server 2008, Developing」
問題と解答：全95問
IT-Passports.com Microsoftの70-691試験問題集は完全な無制限のダンプが含まれていますから、IT-Passports.comを利用したら気楽に試験に受かることができます。製品検定合格の証明書あるいは他の人気がある身分検定によって、IT-Passports.com Microsoftの70-691試験トレーニング資料の長所を完璧に見せることができます。依頼だけでなく、指導のことも最高です。IT-Passports.com Microsoftの70-691試験トレーニング資料に含まれている問題と解答を利用して、Microsoftの70-691認定試験に合格することができます。
IT認証試験に合格したい受験生の皆さんはきっと試験の準備をするために大変悩んでいるでしょう。しかし準備しなければならないのですから、落ち着かない心理になりました。しかし、IT-Passports.comのMicrosoftの70-691トレーニング資料を利用してから、その落ち着かない心はなくなった人がたくさんいます。IT-Passports.comのMicrosoftの70-691トレーニング資料を持っていたら、自信を持つようになります。試験に合格しない心配する必要がないですから、気楽に試験を受けることができます。これは心のヘルプだけではなく、試験に合格することで、明るい明日を持つこともできるようになります。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/70-691.html
NO.1 printf("Pi = %d\n", pi);
NO.2 You plan to develop a parallel application by using Windows HPC Server 2008.
The application performs the following tasks:
x Performs multistep calculations
x Processes data by using the same code segment that runs on each compute node
You need to ensure that each compute process executes the same step simultaneously.
Which type of communication should you use?
A. Buffered
B. Collective
C. Non-blocking
D. Point-to-point
Answer: B
Microsoft認定資格 70-691過去問 70-691認定試験
NO.3 You plan to develop a parallel application by using Windows HPC Server 2008.
You need to implement a method that will send different data to each process in a communicator by using
a single call.
Which function should you use?
A. MPI_Send
B. MPI_Gather
C. MPI_Reduce
D. MPI_Scatter
Answer: D
Microsoft 70-691認定証 70-691認定試験 70-691 70-691認定証
NO.4 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment. (Line numbers are included for reference only.)
01 MPI_Init(&argc, &argv);
02
03 {
04 // program part for rank 0
05
06 }
06 else
07 {
08 // program part for all other ranks
09 }
10 MPI_Finalize();
You need to ensure that the code in the rank 0 section only executes on the process that has a rank of 0.
Which code segment should you insert at line 02?
A. int size;
MPI_Comm_size(MPI_COMM_WORLD, &size);
if (size > 0)
B. int size;
MPI_Comm_size(MPI_COMM_WORLD, &size);
if (size == 0)
C. int rank
MPI_Comm_rank(MPI_COMM_WORLD, &rank);
if (rank == 0)
D. char hostName[MPI_MAX_PROCESSOR_NAME];
int resultlen;
MPI_Get_processor_name(hostName, &resultlen);
char masterName[] = "rank0";
if (strcmp(masterName, hostName) != 0)
Answer: C
Microsoft練習問題 70-691 70-691参考書
NO.5 You plan to develop a parallel application by using Windows HPC Server 2008.
You plan to use a method to control the calculations performed by each individual process.
You need to ensure that different commands can be sent to each process.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: A
Microsoft 70-691認証試験 70-691
NO.6 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment that computes an approximation to Pi. (Line numbers are included
for reference only.)
01 static int totDarts = 10000;
02 int numDarts = 0;
03
04 MPI_Comm_size(MPI_COMM_WORLD, &commSize);
05 MPI_Comm_rank(MPI_COMM_WORLD, &commRank);
06
07 for(i = 0; i < totDarts; i++) {
08 x = 2 * (randomNr() - 0.5);
09 y = 2 * (randomNr() - 0.5);
NO.7 You plan to develop a single program multiple data (SPMD) application by using Windows HPC Server
2008.
You use multiple processes to perform intermediate calculations and to provide the results as a single
number.
You need to ensure that the intermediate results are collected and added together by using a single MPI
function.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: D
Microsoft認証試験 70-691練習問題 70-691 70-691認定証
NO.8 pi = 4 * total/(commSize * totDarts);
NO.9
NO.10 You plan to develop a parallel application by using Windows HPC Server 2008.
You need to ensure that when the application starts, a parameter value is communicated to each process
in the cluster by using a single call.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: B
Microsoft認定証 70-691練習問題 70-691 70-691 70-691過去問
NO.11 ++numDarts;
NO.12 }
You need to ensure that the total number of numDarts is only available on the process that has a rank 0.
Which code segment should you insert at line 13?
A. MPI_Reduce(&numDarts, &total, 1, MPI_INT, MPI_SUM, 0, MPI_COMM_WORLD)
B. MPI_Allreduce(&total, &numDarts, 1, MPI_INT, MPI_SUM, MPI_COMM_WORLD)
C. MPI_Gather(&numDarts, 1, MPI_INT, &total, 1, MPI_INT, 0, MPI_COMM_WORLD)
D. MPI_Allgather(&numDarts, 1, MPI_INT, &total, 1, MPI_INT, MPI_COMM_WORLD)
Answer: A
Microsoft問題集 70-691 70-691認定試験 70-691練習問題 70-691認定資格
10. You plan to develop a Microsoft Message Passing Interface (MPI) application by using Microsoft
Visual Studio.
You have installed the Microsoft HPC Pack 2008 SDK at C:\Program Files\Microsoft HPC Pack 2008
SDK.
You create a new console application.
You need to ensure that the application compiles for a 64-bit architecture.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the Import Library property to msmpi.lib.
B. Set the Additional Dependencies property to msmpi.lib.
C. Set the Additional Library Directories property to C:\Program Files\Microsoft HPC Pack 2008
SDK\lib\amd64.
D. Set the Additional Manifest Dependencies property to C:\Program Files\Microsoft HPC Pack 2008
SDK\lib\amd64.
Answer: BC
Microsoft練習問題 70-691 70-691 70-691問題集 70-691
11. You develop a parallel application by using Microsoft Visual Studio 2008.
You have installed the Microsoft HPC Pack 2008 SDK at C:\Program Files\Microsoft HPC Pack 2008
SDK.
You create a new console application based on Microsoft Message Passing Interface (MPI). You set the
Debugger to Launch property to MPI Cluster Debugger.
You need to ensure that five processes are launched when the application is run in debug mode in Visual
Studio 2008.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the MPIRun Arguments property to -n 5.
B. Set the Application Arguments property to -n 5.
C. Set the MPIRun Working Directory property to C:\Program Files\Microsoft HPC Pack 2008 SDK\bin.
D. Set the MPIRun Command property to C:\Program Files\Microsoft HPC Pack 2008 SDK\bin\MPIExec.
E. Set the Application Command property to C:\Program Files\Microsoft HPC Pack 2008
SDK\bin\MPIExec.
Answer: AD
Microsoft参考書 70-691認定資格 70-691認定資格 70-691 70-691
12. You create a parallel application by using Microsoft Visual Studio 2008.
The application prints a message to the console of all Microsoft Message Passing Interface (MPI)
processes except for one. The application terminates and displays an error message.
You need to change the code in the application so that the application completes successfully.
Which set of tasks should you include in the application?
A. Include mpi.h
Link to msmpi.lib
Call MPI_Start
Call MPI_Comm_rank
Call MPI_Finalize
B. Include mpi.h
Link to msmpi.lib
Call MPI_Init
Call MPI_Comm_rank
Call MPI_Finalize
C. Include mpi.h
Link to ccpapi.tlb
Call MPI_Init
Call MPI_Comm_rank
D. Include mpi.h
Link to msmpi.lib
Call MPI_Init
Call MPI_Comm_size
Answer: B
Microsoft認定資格 70-691認定資格 70-691
13. You plan to create a parallel application by using Microsoft Visual C++.
You want to use the Microsoft Message Passing Interface (MPI) library in the application.
You need to ensure that the application can be compiled for both 32-bit and 64-bit platforms. You also
need to ensure that targeting both platforms requires minimum maintenance.
What should you do?
A. Create a separate project for each platform.
B. Create separate solution files for each platform.
C. Create separate custom build rules for each platform.
D. Create a separate build configuration for each platform.
Answer: D
Microsoft 70-691 70-691問題集 70-691参考書 70-691過去問
14. You create a Microsoft Message Passing Interface (MPI) application by using Microsoft Visual Studio
2008.
The application process is named MPIApplication.exe. You plan to debug the application by using the MPI
Cluster Debugger in Visual Studio 2008.
You need to attach the debugger to the remote process on a compute node.
Which process should you attach to?
A. smpd.exe
B. mpiexec.exe
C. msvmon.exe
D. MPIApplication.exe
Answer: C
Microsoft 70-691参考書 70-691 70-691過去問
15. You create a Microsoft Message Passing Interface (MPI) application by using Microsoft Visual Studio
2008.
You plan to debug the application by using Visual Studio 2008.
You need to configure the nodes that will be used for debugging.
What should you do?
A. Use the Cluster Debugger Configuration tool in Visual Studio.
B. Use the debugging pane in the Visual Studio project property pages.
C. Use the configuration pane in the Cluster Administration Console tool.
D. Use the node management pane in the Cluster Administration Console tool.
Answer: A
Microsoft過去問 70-691認定証 70-691過去問 70-691 70-691
NO.13 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment. (Line numbers are included for reference only.)
01 int rank;
02 MPI_Comm_rank(MPI_COMM_WORLD, &rank);
03 // declaration of variable hostName
04 // code to execute
05
06 std::cout << "hostname of rank " << rank;
07 std::cout << ": " << hostName << "\n";
You need to ensure that a variable named hostName contains the name of the cluster node that the code
runs on.
Which code segment should you add at line 05?
A. char *hostName = getenv("MPI_HOSTNAME");
B. char hostName[MPI_MAX_PROCESSOR_NAME];
int resultlen;
MPI_Get_processor_name(&resultlen, hostName);
C. char hostName[MPI_MAX_NAME_STRING];
int resultlen;
MPI_Comm_get_name(MPI_COMM_WORLD, hostName, &resultlen);
D. char hostName[256];
int resultlen = sizeof(hostName);
if (rank == 0)
{
gethostname(hostName, resultlen);
}
Answer: B
Microsoft 70-691参考書 70-691認定証 70-691認証試験 70-691
NO.14 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
The application uses point-to-point communication.
The process that has a rank 0 sends an array of integer values to the rank 1 process by using the
following code segment. (Line numbers are included for reference only.)
01 int values[5];
02 MPI_Send(values, 5, MPI_INT, 1, 42,
03 MPI_COMM_WORLD);
You need to ensure that each receiving process is able to correctly receive the values in the most efficient
manner possible.
Which code segment should you use?
A. int values[5];
int buffer[5];
MPI_Reduce(buffer, values, 5, MPI_INT, MPI_SUM, 1, MPI_COMM_WORLD);
B. int values[5];
MPI_Status status;
MPI_Recv(values, 5, MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
C. int value;
MPI_Status status;
MPI_Recv(&value, 1, MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
D. int values[5];
MPI_Status status;
MPI_Recv(values, sizeof(int), MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
Answer: B
Microsoft問題集 70-691練習問題 70-691 70-691
NO.15 if (x*x + y*y <= 1.0)
NO.16 }
NO.17 if(commRank == 0) {
IT-Passports.comが提供したMicrosoftの70-691の試験トレーニング資料は受験生の皆さんの評判を得たのはもうずっと前のことになります。それはIT-Passports.comのMicrosoftの70-691の試験トレーニング資料は信頼できるもので、確実に受験生を助けて試験に合格するということを証明しました。IT-Passports.comが提供したMicrosoftの70-691の試験トレーニング資料はベストセラーになって、ずっとピアの皆をリードしています。IT-Passports.comは消費者の皆さんの許可を得て、評判が良いです。Microsoftの70-691の認証試験を受けたら、速くIT-Passports.comというサイトをクッリクしてください。あなたがほしいものを得ることができますから、ミスしないだけで後悔しないです。最も専門的な、最も注目を浴びるIT専門家になりたかったら、速くショッピングカートに入れましょう。
没有评论:
发表评论