2013年11月24日星期日

Network ApplianceのNS0-163認定試験の最新な問題集

君はほかのサイトや書籍もブラウズ するがもしれませんが、弊社の関連の学習資料と比較してからIT-Passports.comの商品の範囲が広くてまたネット上でダウンロードを発見してしまいました。IT-Passports.comだけ全面と高品質の問題集があるのではIT-Passports.comの専門家チームが彼らの長年のIT知識と豊富な経験で研究してしました。そして、IT-Passports.comに多くの受験生の歓迎されます。

IT-Passports.comはIT試験問題集を提供するウエブダイトで、ここによく分かります。最もよくて最新で資料を提供いたします。こうして、君は安心で試験の準備を行ってください。弊社の資料を使って、100%に合格を保証いたします。

試験番号:NS0-163問題集
試験科目:Network Appliance 「Network Appliance Data Protection Solutions」
問題と解答:全154問

現在の社会の中で優秀なIT人材が揃て、競争も自ずからとても大きくなって、だから多くの方はITに関する試験に参加してIT業界での地位のために奮闘しています。NS0-163はNetwork Applianceの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。

IT-Passports.comのNetwork ApplianceのNS0-163試験トレーニング資料は最高のトレーニング資料です。あなたはIT職員としたら、IT-Passports.comはあなたが選ばなくてはならないトレーニング資料です。IT-Passports.comのNetwork ApplianceのNS0-163試験トレーニング資料は絶対に信頼できるもので、IT認証を受ける受験生を対象として特別に研究された問題と解答に含まれているう資料です。 Network ApplianceのNS0-163試験に受かるのはIT職員の皆さんの目標です。IT-Passports.comの合格率は信じられないほど高いです。IT-Passports.comはあなたの成功にずっと力を尽くしています。

このインターネットが普及された時代に、どのような情報を得るのが非常に簡単なことだということを我々はよく知っていますが、品質と適用性の欠如が問題です。インターネットでNetwork ApplianceのNS0-163試験トレーニング資料を探す人がたくさんいますが、どれが信頼できるか良く分からないです。ここで私はIT-Passports.comのNetwork ApplianceのNS0-163試験トレーニング資料を勧めたいです。この資料はインターネットでのクリック率と好評率が一番高いです。IT-Passports.comはNetwork ApplianceのNS0-163試験トレーニング資料の一部の問題と解答を無料に提供しますから、あなたは試用してから買うかどうかを決めることができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/NS0-163.html

NO.1 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B

Network Appliance認定資格   NS0-163   NS0-163

NO.2 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B

Network Appliance問題集   NS0-163認証試験   NS0-163練習問題

NO.3 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C

Network Appliance認定資格   NS0-163参考書   NS0-163認定試験   NS0-163参考書   NS0-163練習問題

NO.4 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D

Network Appliance参考書   NS0-163   NS0-163過去問

NO.5 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B

Network Appliance   NS0-163   NS0-163過去問   NS0-163   NS0-163

NO.6 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D

Network Appliance認証試験   NS0-163   NS0-163認定資格   NS0-163過去問

NO.7 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B

Network Appliance問題集   NS0-163   NS0-163認証試験   NS0-163

NO.8 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D

Network Appliance認定証   NS0-163   NS0-163認定資格   NS0-163練習問題   NS0-163

NO.9 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B

Network Appliance参考書   NS0-163   NS0-163過去問   NS0-163

NO.10 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B

Network Appliance認定証   NS0-163   NS0-163

NO.11 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C

Network Appliance問題集   NS0-163問題集   NS0-163認定試験

NO.12 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A

Network Appliance   NS0-163練習問題   NS0-163問題集   NS0-163   NS0-163過去問

NO.13 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A

Network Appliance認定証   NS0-163   NS0-163問題集

NO.14 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A

Network Appliance認定証   NS0-163   NS0-163練習問題   NS0-163認定資格

NO.15 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D

Network Appliance   NS0-163   NS0-163   NS0-163   NS0-163認証試験   NS0-163

NO.16 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C

Network Appliance   NS0-163   NS0-163認証試験

NO.17 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D

Network Appliance   NS0-163   NS0-163問題集   NS0-163

NO.18 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance   NS0-163   NS0-163   NS0-163問題集   NS0-163

NO.19 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD

Network Appliance   NS0-163練習問題   NS0-163   NS0-163認定試験   NS0-163

NO.20 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D

Network Appliance認定資格   NS0-163練習問題   NS0-163認証試験

IT-Passports.comは多くの人に便利を与えるとともに、多くの人の夢が実現させるサイトでございます。もし君はまだIT試験で心配すれば、私達IT-Passports.comの問題集を選んでください。IT-Passports.comは長年の研究をわたって研ITの認証試験に関する品質が高く、範囲は広い教育資料が開発しました。それは確かに君の試験に役に立つとみられます。

没有评论:

发表评论